How to make a Teacher s Day greeting card? How to make a Teacher s Day greeting card

1. Find a piece of cardboard and use a pencil to draw the shape you like, (like a heart, triangle, circle, diamond, gift shape, sunflower shape, cake shape, etc.) If you draw it wrong, you can use an eraser to modify it.

2. If you feel satisfied, use a pencil to outline the edges and write blessings in the graphics (such as wishing you a hard work, smooth work, etc.).

3. Use scissors to cut out the outer frame, if you want to make the greeting card more beautiful, you can take the ribbon around the outside and fix it with tape.

4. If you still don't think it's good-looking, you can use colored pens to draw lace, paste decorations, and you're done, don't forget to write your name before sending it.

Greeting cards are a kind of cards that people greet each other when they encounter festive dates or events, and people usually give greeting cards on birthdays, Christmas, New Year's Day, Spring Festival, Mother's Day, Father's Day, Valentine's Day and other days. Greeting cards generally have some words of blessing on them. Today's paper greeting cards are not as good as they used to be, not only because of the declining sales of greeting cards, but also in the decline of greeting card manufacturers.

The paper greeting cards of the past are gradually being replaced by the more modern and faster way of wishing themselves.

Greeting cards were born out of the need for human socialization. Because the greeting card is to communicate the emotional exchanges between people, and this kind of communication is often expressed in short sentences, at a glance is also concise and concise, over time, the congratulatory words have appeared stylized, pay attention to festivity, send auspicious words to each other, and convey people's expectations and longing for life today.

The last Teacher's Day card is hopefully in time.

Here's how to make a Teacher's Day greeting card:1. First of all, prepare a piece of red cardboard and yellow cardboard.

2. Fold the red cardboard in half from right to left.

3. Fold left to right.

4. Press the edge of Huai Huishi.

5. Fold in half.

6. Draw a circle with a compass.

7. Take out the discs.

8. Fold the yellow cardboard in half.

9. Combine the lead and stare at the red hard cardboard and fix it with glue.

10. Fold the yellow cardboard.

11. Glue the art cardboard to the yellow cardboard.

12. Draw a carnation in the middle of the circle.

13. Use a pen to dot white dots around the perimeter.

14. Put the yellow cardboard out.

15. Write blessings on red cardboard.

16. Such a delicate Teacher's Day greeting card is ready.

Here's how to make a Teacher's Day greeting card:Tools Raw materials: Lenovo Qitian M5900, Windows 10, Ulead Cool 3D.

1. Open Ulead Cool 3D and enter its main interface.

2. Double-click on the studio and click on the background.

3. Select a teacher's teaching** and press Open.

4. Insert text with mouse clicks.

5. Enter Happy Teacher's Day and press OK.

6. Click on the gallery to add a gallery style of seepage.

7. Click on the object effect, select the part to rotate, and add a rotation style.

8. We made a cong defeat Teacher's Day greeting card.

The Teacher's Day is coming soon, how do you want to express your blessings to the teacher? Gifts are not distinctive when you buy gifts in the gift shop, and it's not bad to make a special gift by yourself.

How to make a greeting card for Teacher's Day.

Handmade greeting cards for Teacher's Day.

The production process. First of all, you should prepare a colored note not too wide, and the color can be set according to your needs.

Cardboard, for cards

Sharp knives, glue. Pick a color for the flower I chose red.

I cut the paper strip in half and cut it into approximately 4cm in length.

Then cut the dark paper into a nice shape and stick it on the light cardboard.

Roll the cut strips of paper into a roll.

A glue of water sticks to it.

Pinch it into a teardrop shape with your hands.

Then pinch the other side as well.

Then knead it into the shape of a petal.

The rest of the hungry are all doing so.

According to the method on the picture, stick it on the card made by Lingyuan, and look like a flower, which is not stipulated in how you want.

Yellow strips of paper, cut into toothed shapes.

I roll it up, and the side sticks with glue.

In the opening of the dial, it is like a flower core.

Stick to the card and the flowers are ready.

Then make the leaves The same way to pinch into the shape of teardrops is the leaves, and it is also to be broken.

Then glue in place.

Then the green pair of broken rolls are made into flower branches and glued.

Then roll a small roll and the joint sticks to wrap tightly

It can be made into small fruits, and it is also sticky at will.

Here's how to make a Teacher's Day greeting card.

1. Fancy greeting cards. The group greeting card looks complicated, but it is actually very simple to operate and cut out the shape of a flower. Fold a piece of cardboard in half, and glue the cut flowers in the folded position. Decorate the leaves, write blessings, and you're done.

2. Floral patchwork greeting card. Cut out the shape of the flower, make a few strokes on it with a pointed object (the reverse side of the stationery blade), and paste it, and the flower will have a three-dimensional effect. The leaves are made in the same way.

3. Graphic folding semi-three-dimensional greeting card. The flower part is round in various colors, with some variations in shape. A rectangular piece of paper is folded several times, fixed in the middle part, and glued to the greeting card. The bow is colored tape, so remember to trim it.

4. Three-dimensional greeting cards. This kind of greeting card is more complicated to make. The first is to first choose the position of the three-dimensional part that comes out to be displayed, and then glue some balloons on it.

In the second way, the paper is processed into long strips, rolled into different shapes, and glued to the cardboard. Seniors can take on some challenges.

5. Semi-finished greeting cards. This type of greeting card is very simple. When you buy it, it's a semi-finished product, and you can paste it yourself, and it's a beautiful greeting card.

6. Simple graphic change greeting cards. Cut the cardboard into a heart, rectangle, etc., and then decorate it. As long as the colors are coordinated, it still looks good, and it is more suitable for junior students.

1. First of all, let's make the background of the greeting card. Inserts a Rectangle inside the AutoShape.

2. Right-click the mouse on the rectangle and select "Set Custom Shape Format....”。

3. Set the fill color of the rectangle to light blue, and click the OK button.

5. Right-click on the "heart-shaped" AutoShape you just inserted, and select "Set TAutoShape" Format....”。

6. Macro difference: Select "Fill Effect" in the fill color”。

7. In the pop-up "Fill Effect" window, click "Bicolor" at 1 place, select "Pink" at 2 places, click the first form at 3 places, and click the "OK" button.

8. Set the line color of "Heart" to "Wireless Bar Color" and click the "OK" button.

9. Right-click "Heart" again, select "Add Text", and enter "Wish".

10. Set the font, font size and alignment of the text, and set its "3D Effect Style" to "3D Style 7".

11. Then right-click the "Heart" AutoShape and select "Copy". Note: This is a selection of the entire AutoShape, not the text.

12. Click on the background with the mouse, press the "Ctrl+V" key combination to paste a few identical graphic styles, and modify the text inside.

13. Then insert the "Doji" AutoShape.

14. In the same way, copy the "doji" just inserted.

15. Press the "Ctrl+V" key combination to paste several of the same and modify them to different sizes.

16. Add text to the background below. Right-click on the Rectangle and select Add Text.

17. Right-click on the "Rectangle" again, select the "Text Direction" as the vertical format, and then you can input the font into your text.

18. After entering the text, modify the font, font size, color, etc. of the text until you are satisfied.

Hello dear, I am Qingshuai, a town education consulting teacher, I am quickly replying to your questions, about three minutes before I can get sleepy to sort it out, I hope you wait patiently, not the town of Yuqi to be anxious, and reply to you immediately.

Hello Songli, I'm glad to answer your questions. How to make a Teacher's Day greeting card: Prepare materials:

Cardboard, scissors, lace scissors, sequins, highlighters, rental glue, teacher and baby photos and other production steps: cardboard folded in half, lace scissors cut out four edges, pasted, painted with the star blessing or press the baby's handprint, blingbling Teacher's Day greeting card is completed

Hope mine is helpful to you.