Why wiring in the home is so important

Comfort. Good things have to be good in whatever they are.

In kitchen wiring, if you are planning to buy a whole cabinet, they will help you design the wiring. If you don't buy it, make it yourself. Just pay attention to leave the refrigerator socket.

Leave a few more five-hole sockets on the cabinet. Because there are generally more kitchen appliances. Let's discuss it with the decorator in detail.

Kitchen and bathroom should pay attention to waterproofing. In the bathroom, there should be a socket next to the washbasin to dry your hair. Of course, there should be sockets on both sides of the bed in the bedroom and the sofa in the living room.

In the bedroom, there should be a double control switch next to the bed. Of course, the TV line should also be left, directly opposite the bed. Nowadays, there is no electricity or telephone line left in the bedroom.

Television is not yet wireless at the moment. In addition, it should be noted that strong and weak wires should be sleeved separately. Of course, the study room goes without saying.

Universal plug-in, network cable is indispensable. That's it. Generally, it is necessary to analyze the space specifically.

Generally speaking, electricity goes to the top, and the water is underground. It should be noted that when walking on the wall to be straight, it is easy to find the material and facilitate later maintenance。。 The joints should be well connected, otherwise there will be potential safety hazards!

However, after designing the switches, sockets, and lamps in your room, those workers will help you get it right! As for the ** cable, network cable, TV cable, and power cable, these should be arranged in your bedroom according to your needs. . . It doesn't matter if you have any wires!

The general principle is that strong and weak electricity are separated, socket power supply and lighting are separated, and strong electricity is left to have a margin. First drain the electric pipe and put the wire, and then enter the line after the wall is ready.

Don't get too close to the sewers, you look for renovations, and they say, they'll design it well, and in more you say.

Although I have experience in renovating a new house, I hope it helps you. My house is in the north and has heating. There are a few things I think are important about the process:

1. Wiring first, and then laying floor heat: because the wiring has to run under the floor, if you lay the floor heat first, you have to run the pipe on the ceiling, which costs materials and costs high (my family made this very strange mistake!). 2. Wiring is very critical and professional, and the water and electricity pipelines directly affect the convenience index in the future, so it is recommended to find professionals; Communication with professionals is very crucial, to design your own needs first, don't think about it, will miss 3, lay tiles after wiring, do masonry 4, carpenter:

Including suspended ceilings, modeling walls, including door 5, oilman: wall and wood paint 6, electrician: lamps and lanterns 7, plumbing:

8. Installation of sanitary ware, oilman: make up for the wall injuries caused by the decoration process. My home has just been renovated, found a very small decoration company, bargaining when the price is more happy, and later found that the contract is still very pitiful, mainly because of the concept of "main materials" is not familiar, many need to buy their own materials in advance because they do not understand is not clear, afterwards feel very lost.

It is advisable to ask each item clearly before signing the contract. I don't know if I'm the only one looking for this one, if you buy a crystal lamp with a very repeated structure, you have to add money on top of the installation cost of the lamp agreed in the contract, which is my own experience. The decoration cost is mainly calculated according to the size, and the measuring ruler must not be sloppy!

A switch box should be set up at the door (the hollow opening in the switch box should be protected by leakage), and the wiring in each room should be separated and laid separately (the dark line must be equipped with PVC pipe). Wires of different sections can be selected according to the different power used in each room, and the general air conditioner should also take a separate line. Also note:

The power of electrical appliances in the three places of air conditioning, kitchen and bathroom is generally relatively large, and the wires should be selected with a cross-section (BV 4 square millimeters).

Wiring tips: In the wiring of bedrooms and living rooms, sockets and lighting can be used with the same neutral wire, and the live wire should be separated separately and de-powdered. This can also save a part.

1. The spacing between strong and weak currents shall not be less than 30cm, and shall not be in the same tube.

2. There shall be no more than three wires in a threading pipe, and red, blue and two-color lines shall be divided.

3. The distance between the wire and the gas pipeline shall not be less than 1,000 meters.

Fourth, the switch, socket, should be the left side of the zero line and the right side of the live wire.

5. The wires should be grouped and wired, including one group of lighting, two groups of sockets, one group of air conditioners, one group of kitchens, and one group of high-power electrical appliances.

6. The wiring is required to be horizontal and vertical, and the intersection of strong and weak conduits should be isolated with tin foil to do a good job of weak current shielding.

7. According to national regulations, lighting, switches, and sockets should be wired with square millimeters, air conditioners should use wires of 4 square millimeters, and water heaters should be wired with 6 square millimeters.

8. When the water pipe and the wire are crossed, the electricity is underwater.

Please do a professional electrician, speaking of good, each room should be independent of a main line, air conditioning should also be independent, the main line of the kitchen should be larger, because the electrical appliances use a lot of electricity, all the main line is to the main switch box, the total power supply with air leakage double-pole switch, the main line of the room with a single-pole air switch, in this way, the line has a problem at a glance to understand, maintenance is good, families generally use DZ47 type switches.

The wiring principles of the smart home are different from our traditional wiring principles.

In the smart home system of wireless protocol, because the switch of wireless protocol needs to be powered, it is necessary to set the neutral wire and live wire on the switch, and in the traditional wiring scheme, the switch only needs one live wire, and the wiring scheme of the wireless protocol has little change from the traditional wiring.

In the smart home system of the bus protocol, the wiring scheme is divided into centralized, distributed, etc., and weak telecommunication lines are also introduced, and the wiring principle is completely different from the traditional way. If the wiring is not correct, the whole system cannot be implemented properly, so the wiring is very important. The smart home system of Smart Space is wired.

This is related to the communication mode of current smart home products, many domestic brands are using wireless communication technology, they also say that the wiring is simple when they do promotion, and the user is easy to understand that there is no wiring, in fact, from the intelligent controller to the controlled household appliances, such as lights, air conditioners, etc., or need wiring, the so-called wireless refers to the communication between the intelligent controllers is wireless.