What is vitrified microbead insulation mortar used for?

Vitrified microbead insulation mortar is a new type of inorganic thermal insulation mortar material applied to the internal and external insulation of external walls, which is made of vitrified microbeads as light aggregate and vitrified microbead thermal insulation rubber powder according to a certain proportion and stirred and evenly mixed, which has the remarkable characteristics of high strength, light weight, heat preservation, good heat insulation, good electrical insulation performance, wear resistance, corrosion resistance, radiation protection and so on.

Six features. 1. Environmental protection, non-toxic, no peculiar smell, no solvent.

2. Good workability, easy to control the construction thickness.

3. Light capacity, low thermal conductivity and stable thermal insulation performance.

4. Good thixotropy, small dry shrinkage rate and good integrity.

5. Good freeze-thaw resistance and water resistance, high flame retardant grade.

6. Good adhesion and shear force, excellent crack resistance and wind pressure resistance.

Vitrified microbead insulation mortar is synthesized from hollow vitrified microbeads and vitrified microbead rubber powder. Vitrified microbead insulation mortar has excellent thermal insulation performance and fire and aging resistance, no hollowing cracking, high strength, on-site construction can be used with water stirring, vitrified microbead insulation mortar can be directly constructed on the dry wall, good workability, in the material properties to make up for the traditional polystyrene particles and ordinary expanded perlite light aggregate insulation mortar in many defects and deficiencies, vitrified microbead insulation mortar to overcome the expanded perlite light aggregate water absorption, easy to pulverize, in the slurry construction volume loss rate is large, It is easy to cause low strength and hollow cracking in the later stage of the product, reduce the thermal insulation performance, etc., and the vitrified microbead insulation mortar also makes up for the flammability, poor fire resistance, high temperature harmful gases and aging resistance, low weather resistance and poor workability, and large defects in construction, which greatly improves the comprehensive performance and construction performance of dry powder insulation mortar. You can go to Chengdu Chonghui Technology **** to provide you with more information about vitrified microbead insulation mortar.

1. Inorganic thermal insulation mortar:

Inorganic thermal insulation mortar is a new type of thermal insulation and energy-saving mortar material used for painting interior and exterior walls of buildings, which is divided into cement-based inorganic thermal insulation mortar and gypsum-based inorganic thermal insulation mortar according to the different cementitious materials. Energy-saving inorganic thermal insulation mortar has the characteristics of energy saving and waste utilization, thermal insulation, fire and anti-freezing, anti-aging and low performance, and has a wide range of market demand.

2. Vitrified microbead insulation mortar:

Vitrified microbead insulation mortar is a new type of inorganic thermal insulation mortar material applied to the internal and external insulation of external walls, which is made of vitrified microbeads as light aggregate and vitrified microbead thermal insulation rubber powder according to a certain proportion and stirred and evenly mixed, which has the remarkable characteristics of high strength, light weight, heat preservation, good heat insulation, good electrical insulation performance, wear resistance, corrosion resistance, radiation protection and so on.

The method of vitrified microbead insulation mortar is as follows:

1. Pour water into the container first, then add powder, mix according to the mix ratio of 1kg powder: about water, mix it with Brother He's electric mixer and stir it into a uniform, particle-free paste, and the product can be used after standing for 3-5 minutes.

2. Evenly wipe on the working surface with a scraper, wait for it to dry for 24 hours, and then carry out the next scraping, and then wipe it evenly on the working surface with a scraper and then smooth; The thickness should be kept at 15mm-20mm for each scraping (the maximum thickness of a single time is not more than 35mm), and after the design thickness requirements are met, the next process can be carried out after 3-7 days of natural curing.

Due to the chaotic vitrified bead market, its quality is uneven, resulting in most of the vitrified bead insulation mortar water absorption rate, easy hollowing and other shortcomings, in order to ensure the quality of its vitrified bead insulation layer, we must pay attention to the following points in the construction. Key points to note in the construction of vitrified microbead insulation mortar:

1. The construction temperature of vitrified microbead insulation mortar should not be less than 5; Clean the base layer of the wall that needs to be insulated to prevent the vitrified microbead insulation mortar from hollowing; Add an appropriate amount of water to the vitrified microbead insulation mortar and stir it well, pay attention to the high water absorption rate of the vitrified microbead insulation mortar, and be sure to pay attention to the amount of water added when stirring.

2. According to the insulation thickness required by the design, the stirred insulation mortar is distributed, and the closed gap per square meter shall not be less than one, and the insulation layer shall be completed in 2-3 times. The first time it is required to try to compact the vitrified microbead insulation mortar to make it firmly bonded with the wall, and try to make it thicker. Allow for 3-4 hours to dry out and apply 2-3 times and level and calender.

3. The drip groove should be directly embedded in the insulation layer when applied for the second time; After the insulation layer is basically dry, paste the mesh cloth or make the steel wire mesh (the insulation of the external wall can not be used as a mesh cloth); After the insulation layer is cured and dried for about 2 days (it is advisable to press it with the palm of the hand), the construction of the protective surface layer is carried out; It should be noted that the stirred vitrified microbead insulation mortar must be used up within 1 hour, and it is forbidden to use obsolete ash.

Vitrified microbead insulation mortar**.

1. If it is only the material of vitrified microbead inorganic insulation mortar, it is 2cm thick yuan kg, and the large nano belt is the only general.

2. If it is the entire construction process, including anti-cracking mortar, mesh cloth, mesh mortar, and labor costs, it will cost 16 yuan m, which does not include taxes and management fees, which are 10 cm wide.

Vitrified microbead insulation mortar construction technology.

Step 1: Prepare all kinds of materials required in construction. For example, vitrified microbead insulation mortar mixing containers, electric mixers, scrapers, etc.

Step 2: Pour water into the prepared stirring container, and then pour the powder of vitrified microbead insulation mortar according to a certain proportion (under normal circumstances, the mixing ratio of water and powder is: 1, that is, 1 kg of powder is added to the kilogram of water).

After mixing the water and the powder of the vitrified microbead insulation mortar, the two are evenly mixed with an electric mixer until they become a particle-free paste. First, let the stirred insulation mortar stand for 3-5 minutes, and then stir it again until it is uniform, and then the insulation construction can be carried out.

Step 3: Clean the dust and debris attached to the base layer of the wall that needs to be insulated. This cleaning process can be carried out at the same time as the second step.

Vitrified microbead insulation mortar formulation.

Formulation Components.

Plain Portland cement or 135kg

Heavy calcium carbonate (200 mesh) or fly ash 20kg

Construction-grade gypsum powder.

Light calcium carbonate (200 mesh).

Rubber powder 3kg

Cellulose ether, viscosity 100000mpas

Polypropylene staple fiber (PP fiber) 15-19mm

Air-entraining agent expanded vitrified beads (depending on bag size) 5-6 sachets.

Vitrified microbead insulation mortar manufacturer.

Vitrified microbead insulation mortar manufacturers recommend:

Beijing Juneng Xingye Science and Technology Development ****.

You can get it for free

Formula: Plain silicone dioxinate cement or 135kg

Heavy calcium carbonate (200 mesh) or fly ash 20kg

Construction-grade gypsum powder.

Light calcium carbonate (200 mesh).

Rubber powder 3kg

Cellulose ether, viscosity 100000mpas

Polypropylene staple fiber (PP fiber) 15-19mm air-entraining agent.

Expand vitrified beads (depending on bag size) for 5-6 bags.

Vitrified microbead insulation mortar is a one-component dry-mixed high-performance inorganic wall insulation material composed of vitrified microbeads (VMB), cement and admixtures. 2.Among them, glass milled leaded beads are irregular spherical particles made of volcanic lava mineral materials through heating and expansion and vitrification cooling, which are vitrified and closed on the surface, and the internal pores are missing.

Summary. Vitrified microbead insulation mortar is a new type of inorganic thermal insulation mortar material applied to the internal and external insulation of external walls, which is made of vitrified microbeads as light aggregate and vitrified microbead thermal insulation rubber powder according to a certain proportion and stirred and evenly mixed, which has the remarkable characteristics of high strength, light weight, heat preservation, good heat insulation, good electrical insulation performance, wear resistance, corrosion resistance, radiation protection and so on.

Vitrified microbead insulation mortar is a new type of inorganic thermal insulation mortar material applied to the internal and external insulation of external walls, which is made of vitrified microbeads as light aggregate and vitrified microbead thermal insulation rubber powder according to a certain proportion and stirred and evenly mixed, which has the remarkable characteristics of high strength, light weight, heat preservation, good heat insulation, good electrical insulation performance, wear resistance, corrosion resistance, radiation protection and so on.

Vitrified microbead insulation mortar is a one-time good or two good to stir together! Hello, happy to answer your <>

Vitrified microbead insulation mortar is two kinds of good vitrified microbead insulation mortar stirred together, is a new type of inorganic thermal insulation mortar material applied to the internal and external insulation of external walls, with vitrified microbeads as light aggregates, vitrified microbeads thermal insulation rubber powder is stirred and evenly mixed in a certain proportion, with high strength, wide and light quality, heat preservation, good heat insulation, good electrical insulation performance, wear resistance, corrosion resistance, radiation protection and other significant characteristics 1, environmental protection, non-toxic, no peculiar smell, solvent-free vitrified microbead insulation mortar vitrified microbeads insulation mortar 2, good workability, easy to control the construction thickness 3, light capacity, low thermal conductivity, stable thermal insulation performance 4, good thixotropy, small dry shrinkage rate, good integrity I hope my laughing stove width can help you <>

Do you have any other questions?