Recently, the CPU temperature is too high, standby 55 degrees, I have cleaned the fan, I don t know

It's hot now. I have two computers. A fan is also cleaned. It also takes more than 50 degrees to wait for the plane. But I can. The air conditioner was turned on and waited for more than 30 degrees. The graphics card will not play games more than forty-five degrees.

CPU 55 degrees is very normal! The landlord can use it with confidence, and if he really wants to drop, he will turn on the air conditioner.

1.Whether the fan speed is normal, because the fan has been used for a long time, the bearing will wear and cause deflection. When touched by hand, you will feel a more severe vibration. If yes, replace the fan.

2.If there is no problem with the fan, check to see if the heatsink is in full contact with the CPU and see if the thermal paste is effective.

4.The computer has too many programs open at the same time, which will also make the CPU run at high speed, resulting in high temperatures. If there is a Trojan virus, the same will be true!

When you turn on the machine, observe whether the speed of the fan is normal, and if it is not fast, change it.

See if the power supply is enough.

I'm amd5000+ boot temperature 50 play wow for 10 minutes temperature 75-80 and then automatically shut down.

Changed 3 fans, and finally changed the overclocking three copper tubes, and the two fans are not good, and they have to change the CPU I happened to see a slight power supply on the Internet that caused a crash, and when I looked at my own power supply, I found a miscellaneous one, and the power was rated at 300W, and I calculated my own 316w With the attitude of trying it out, I bought a Great Wall quad-core king The power supply rated at 400W was replaced, and the miracle happened wow Three open 2 hours CPU temperature did not exceed 60 It's so cool that the troubles that plagued me for 3 months were finally solved.

Summary. Hello dear, about your question about whether the computer standby CPU temperature of 85 degrees is not good or the CPU is broken, the answer is as follows: The CPU temperature of 85 degrees is very high, it may be that the heat sink is not good enough, I suggest you check the heat sink first to see if there is any dirt blocking the heat transfer.

If there is a problem with the radiator, it is recommended to replace the radiator. You can consult a professional maintenance person for a replacement.

Dear, hello, about your question about whether the computer standby CPU temperature of 85 degrees is not good for the heatsink or the CPU is broken, the answer is as follows: the CPU temperature is 85 degrees is very high, it may be that the heat sink is not good enough, I suggest you check the heat sink first to see if there is any dirt blocking the heat transfer. If there is a problem with the radiator, it is recommended to replace the radiator.

You can consult with a professional maintenance personnel to replace it.

Extended InformationHow to Replace the RadiatorIn order to replace the radiator, you need to cut off the power source first, and then remove the housing. Next, find your CPU, unplug the heatsink from the CPU, untie it with Fanna ether if there is any adhesive, and then use a micro screwdriver to remove the heat pipe. Next, place the new heatsink on the CPU, make sure it's tightened, and attach the heat pipes.

Finally, reinstall the case, restore the power, and check to see if the CPU temperature has decreased.

The temperature of the machine can be lowered in the following ways:

1. Environmental factors, if the indoor temperature is higher than 27 degrees, then the temperature of the machine will rise faster, so it is an important prerequisite in the appropriate ambient temperature.

2. During the operation of the machine, if there is more software running and more CPU resources are occupied, then the CPU will heat up quickly, and there are two ways to reduce the CPU power consumption and reduce the temperature: 2

1. Install the CPU

Management software, use software to manage the use of CPU, so that resources can be reasonably saved; 2-2 In the process of use, try to avoid running multiple large-scale software at the same time, for example, running CAD software at the same time when running Word.

3. It is also a simple and easy way to change a high-power CPU fan.

4. Pay attention to maintaining the hygiene of the machine, which is also a simple and effective way.

1.If there is too much dust, it is recommended to disassemble the machine directly to clean the ash, re-insert each cutting, and then clean the dust in the card slot and plug it in.

If there is too much dust or aging of the fan, if there is too much dust, clean the ash directly, if the fan is aging and there is a failure of insufficient heat dissipation, you can only replace it with a new cooling fan.

3.Reapply the heat dissipation paste, also known as heat dissipation silicone, to improve the heat transfer effect.

It should be that the heat dissipation silicone is dry and needs to be replaced.

Replace the heat sink, you don't touch the heat sink, you should touch the CPU, I guess your heat sink is in poor contact with the CPU.

I've had this problem before, but I've just changed the fan. This is still not your heat dissipation, you can change to a better fan to try, you can go to the electronic city to try it out and pay for it.

The heatsink and CPU are in poor contact, or the silicone you are using is not up to standard. Find a store with good technology to help you straighten it out.

1.Check that the fans in the case are working properly. 2.

Clean up the dust inside the chassis (the correct way is to blow the dust with a bike pump). 3.Be sure to add thermal grease between the CPU and the heat sink.

4.Put a drop of sewing oil on the bearing of the cooling fan to reduce the noise! Don't drop too much, just one drop.

5.If necessary, you can install a high-power CPU fan and buy a radiator with better heat dissipation effect, such as Kyushu Fengshen. 6.

Install a cooling fan in the case (be sure to buy a double ball bearing). 7.It is advisable to move the main unit to a well-ventilated place.

Due to the strong electromagnetic radiation in the case, which is harmful to the human body, it is recommended not to open the case cover to dissipate heat.

First of all, there are 4 problems to rule out:

1. The chassis is large enough, the air duct is reasonable, and the heat dissipation is no problem.

2. The fan performance is enough to hold down your CPU

3. Apply the silicone grease correctly.

4. The motherboard does not add voltage by itself.

Generally, if these 3 problems are solved, there is no reason for the high temperature to crash.

The last possibility is the CPU itself, such as poor physique, or process problems that cause the core and aluminum alloy cover to not fit.

Laptop's heat sink throughout.

This is due to the fact that no thermal grease is used, or the fan is not installed in place.

When replacing the fan, if it is not installed in place, it looks like it is stuck, but the fan radiator base and the processor have serious poor contact or even no contact at all, the heat dissipation is almost not working normally, and the temperature will rise sharply with use, at this time, you should immediately turn off the computer, reinstall the radiator, and ensure that the radiator installation position is completely in place; At the same time, thermal grease should be used to coat the contact part between the processor and the heat sink, if the thermal grease is not used, it will also lead to poor contact between the aluminum bar of the heat sink and the processor. The amount of thermal grease is moderate, after installation, grab the radiator aluminum bar with your hand and shake it left and right to see if there can be a slight slide (if the thermal grease is laid in good contact, it can slide slightly), if so, the installation is completely in place.