After I installed the XP system, why can t I go into the original VSTE system, and both systems are

Right-click on My Computer, then click on Properties, then click on Advanced, then click on Settings in "Startup and Failback", and then you look at your system which list there are several, if there is only one, it means that the list of other operating systems is missing.

boot loader]

timeout=5

default=multi(0)disk(0)rdisk(0)partition(1)\windows

operating systems]

multi(0)disk(0)rdisk(0)partition(1)\windows="microsoft windows xp professional" /noexecute=optin /fastdetect

First, check whether the timeout is equal to 0, which is the time to wait for the system to be selected. A value of 0 indicates that the default system is started.

Second, check to see if there are any XP startup items.

operating systems]

multi(0)disk(0)rdisk(0)partition(1)\windows="microsoft windows xp professional"

If you don't have it, add it, try it yourself!

Because the operating system is installed from a higher version and the lower version, the boot option is corrupted, so I will send you a dual system boot repair tool.

Find the previous system disk by yourself, repair it from the console, and get it done in a few minutes.

It may be a system problem, it doesn't matter, you just click on the optical drive and install it manually. setup

Can you tell what not to show is not to show the optical drive to start and nothing to start.

You have to change the hard disk SATA to compatibility mode.

Assuming that your Office 2007 installation is fine with the early file itself, there are a number of possible reasons:

1. I don't have Microsoft's net framework package installed (XP is not brought, win7 will be bringed); Cover the number of birds.

2. The old version of office is not uninstalled clean (the standard uninstall of Microsoft office will not be clean, and the original installation of Wenbi Zheng will not be automatically deleted!) ）

Check it out. It is recommended to install WPS Office 2013 and be compatible with Office 2007. It's pretty good, too.

Turn on my computer;

Select the Tools drop-down list in the title box and select the Folder option;

Select the "View" code banquet tab, and find "Use Simple Sharing"; Chi Dayin removed the hook in front of it and confirmed;

Go back to my computer, select the right click on the C disk imitation spine charm - Properties;

Select the "Security" tab, "Add" - Advanced "- Find";

Find the name everyone, double-click to select it, OK;

I didn't start it with a CD, you did it in win8.

If I'm not mistaken, you're installing XP from open win8.,In principle, you can't install a lower version of Windows from a higher version of Windows.。

The solution is that the installation should be booted from a CD, or some other medium.

The files inside the disc are corrupted.

You're an installed version.。。。 Did you partition your hard drive? Is there enough space for the hard drive?。。。

You install XP first. Put the installed version of XP. Settle to the C drive.

Then install Win8 to the D drive.。。 Basically, you install a dual system. I won't install it myself.

Get 100-200

Why can't I turn it on? If there is no self-test at boot, then it should be a hardware problem, memory incompatibility or memory problem, if you can enter windows after self-test, then it should be a problem with windows, and you can reinstall the system.

WinXP can be installed 4G memory,It's nothing more than a 32-bit system can only be recognized,The rest is wasted,If other configurations are OK,It is recommended that the landlord install win64,This can make full use of memory。

What is the configuration of the machine, XP can only recognize it.

1. Determine that there is a problem with one of the two memories or slots.

2. Use the elimination method to solve:

1) Test root by root, if one of them causes the machine to not light up, you can judge the problem memory.

2) Both can be lit, change the slot, if the replacement slot is not lit, judge that there is a problem with the slot.

3. There may also be a situation that the memory frequency is too high, and the size of the memory exceeds the maximum number supported by the motherboard, and it will not light up at this time.

You need to press the F1 key to enter the boot, mainly because the settings in the BIOS do not match the real hardware data, which can be divided into the following situations:

1. In fact, there is no floppy drive or the floppy drive is broken, but there is a floppy drive in the BIOS, which leads to pressing F1 to continue.

2. I originally hung two hard disks, and set them as dual hard disks in the BIOS, but later forgot to change the BIOS settings back when I removed one of them, which will also cause this problem.

3. If the motherboard battery is out of power, it will also cause data loss, which will cause this failure.

Press the DEL button on power, go to the BIOS settings, and select the first one"Basic settings"I don't set floopy"disabel"Void.

You have to install the clone package in the DOS way, and it doesn't work to install XP directly in Win7.

The next one-click clone or something like that is installed on the computer.

Format the drive and then reinstall it. Brand machines are just not easy to ......