Can I still use my phone battery if it is soaked in water?

It can be used after the phone battery is soaked in water, but the following remedies should be taken immediately after the phone battery is soaked in water.

1. Immediately remove the water, and dry it with a dry cloth or wipe it with a dry cloth.

2. Place the battery in the sun for 24 hours or dry the battery at a temperature of about 30-5 degrees.

3. Before use, be sure to confirm that the water has completely evaporated before putting it into your mobile phone.

4. Once you find that the mobile phone is seriously heated, you should stop using the battery immediately.

If the mobile phone battery is flooded, under normal circumstances, as long as it is dried, the battery is not damaged, and the contact point is good, it can be used normally.

But for the sake of safety, and you can't know if there is a problem with the quality of the battery itself, so if there is water in, try not to use it.

The high-quality batteries in the domestic brands include Scud, Laishenglong, Andida, and Rishengfeng).

It can be used! The mobile phone battery is zinc Lu sealed water will not enter, as long as it is cool and dry, it can be used, and my mobile phone can still be used after falling into the water for a long time!

After soaking in water for a long time, it is estimated that the mobile phone battery can not be used, it is recommended to replace the authentic original mobile phone battery, or use the commercial battery of a well-known brand such as domestic Hongyi battery with guaranteed quality.

It can be used, as long as the battery is removed in time after the water is not damaged, the phone can be used completely, but there will be some water stains on the screen, and the performance will also be reduced

If you don't start it after picking it up, put it for a week or half a month, and try it when it's dry, if you can use it.

If you turn on the computer before it dries, then you don't use it, it has corroded or short-circuited inside.

Only for tap water, fire water, plain water, if it is other water with chemicals, such as drinks, soapy water, laundry detergent, and other water, then do not use it.

Under normal circumstances, it cannot be used, because the battery is short-circuited when it is soaked in water.

Yes, my mobile phone was soaked in the fish tank for 6 hours, and I took it out and dried it to use.

I've come across it before, you have to dry it with a hair dryer and leave it for three days before you can use it.

Generally, it can't, but the mobile phone is waterproof and not.

Hehe. It depends on luck. My wife's 3220 was soaked in a mobile phone.

The results were all played. I also forgot to take a 55 battery for my laundry last night. Rub it until it is hard and take it out to see, I lean, dry it tightly, wipe it with a dry towel, and then take it to the fan and blow it overnight.

Put it on in the morning and try it, and the familiar hand-holding will appear in front of you.

Dry it for a few more days, try it with a useless universal charge, be careful.

The landlord has the same cup as me. I bought my phone and soaked it the next day. It definitely can't be used. Mine soaked for 2 minutes and couldn't use .........

Yes, but it won't be as good as it used to be

It can be used with a battery that is more precise.

No problem.

OK. That to the balcony to air dry. Try it.

Hello friends! Hehe, it depends on the actual situation! Do you want to know what about your phone? There is no damage, it is OK if it can be turned on

It's broken, it's a battery, the battery is not expensive, the quality of Pivoful's business battery is good, and it belongs to the first-line brand in the peripheral battery of the mobile phone. Features are:

High energy density; Lithium-ion batteries weigh half as much as nickel-cadmium or nickel-metal hydride batteries of the same capacity, and have 50% of the volume of nickel-cadmium and 30% of nickel-metal hydride.

Environmentally friendly and pollution-free; Lithium-ion batteries do not contain harmful metal substances such as cadmium, lead, mercury, etc.

High cycle life; Under normal conditions, lithium-ion batteries can be charged and discharged more than 500 times.

No memory effect; The memory effect refers to the phenomenon that the capacity of a nickel-cadmium battery decreases during the charge-discharge cycle. Lithium-ion batteries do not have this characteristic.

Fast charging speed; Using a constant-current, constant-voltage charger with a rated voltage can fully charge a lithium-ion battery in one to two hours.

So, you can consider buying it.

Generally speaking, the power of the battery will drop after soaking in water, that is because the "+" pole and the "-" pole have a certain degree of short-circuit process, the main reason is because water is a conductor, if the soaking time is very short, the water has not had time to penetrate into the inside of the battery, then after drying, it can still be used.

If you soak in water for too long, the battery will be damaged, and if there is no electricity, it will not be able to be used.

Precautions: When several batteries are used together, it is best to replace the battery together, or the new Zaoyu battery is easy to run out.

It is possible to repair it, many mobile phones are waterproof nowadays, and the impact of water in general is very small, and there is no need to repair it. But there are also some parts that can't be repaired.

1. Fall into non-clean water when the power is on, or fall into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on. This situation is the most troublesome. However, there is also a good chance that the machine will recover after proper treatment.

2. Some mobile phones have fallen into the water, and the repair must be able to be repaired, but it is estimated that many accessories are broken, the motherboard must be hung up after soaking in water for a long time, and the screen may not work, not to mention the battery, it is recommended to go to the after-sales inspection to see how much it costs to repair, and it is recommended to buy a new one if the cost is too high.

3. If the mobile phone is flooded, it is recommended that you do not turn it on, first dry the water with a cold air of a hair dryer, and then send it to your local customer service center for testing as soon as possible.

After the mobile phone charger falls into the water, it should be quickly picked up and dried and placed in a cool and ventilated place to dry, and then it can be used normally.

Precautions for mobile phone chargers:

1. Keep the charging port of the mobile phone dry.

In daily life, the mobile phone may be stained with water, such as looking at the mobile phone when washing vegetables, etc., the water outside the mobile phone is visible to the naked eye, but if a small amount of water enters the charging port, it is not easy to find out if you do not check carefully, if you charge the mobile phone at this time, the water will flow around with the current, and the mobile phone will soon be burned out, which will cause ** in serious cases. Therefore, in daily life, we try not to use the mobile phone to contact with water, and wipe it in time after contact.

2. There should be a certain order when charging the mobile phone.

When charging with an ordinary plug-in strip, plug in the charger first, and then connect the mobile phone and charging cable, do not connect the mobile phone first, and then connect the power supply. Power surges can occur in the wrong charging sequence, which can affect the battery life of the phone, shorten the battery life, and cause the phone to malfunction over time.

3. Use the original charger.

The original charger can better match the mobile phone, and the current is stable, and the regular mobile phone manufacturer will repeatedly test the safety performance of the charger before the mobile phone leaves the factory. The quality of some non-original chargers is uncertain, which cannot meet the function of fast charging the mobile phone, which delays the use of the mobile phone, and will reduce the efficiency of people's travel.

4. Try to charge before it is lower than 20%.

Generally, the mobile phone will send a prompt when the battery is less than 20%, which makes sense, because at this time the mobile phone has gradually entered a state of power loss, and the battery life of the mobile phone that often loses power will be shortened. It is often said that the battery of a new phone is more durable than the battery of an old phone, because the battery of a new phone is full, but with the increase of the number of power losses and the increase of service life, the phone seems to be fully charged, and the battery may only be 80% charged. Charging at a low battery will increase the chances of your phone**.

5. Try to use the power bank to charge the mobile phone as little as possible.

The original intention of designing power banks was to make it convenient for people to charge when they went out, but now many people are also used to using power banks at home. There are many types of power banks on the market, the quality is also uneven, the output power is also different, some power banks can not input current for the mobile phone, only long-term use can judge the quality of the power bank. Both mobile phones and power banks are possible**, so don't use power banks to charge your phone often for temporary convenience.

It should be fine for a short time, it's just a short circuit discharge. It's hard to say for a long time!

Today's mobile phones are all waterproof, and they are generally okay. After the phone gets into the water:

1. Please keep your phone in a dry and ventilated place as much as possible, and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Please send your mobile phone to the customer service center for inspection and processing as soon as possible to avoid unnecessary losses.

Precautions after water ingression:

1) Do not move or shake the mobile phone frequently after entering the water, so as to avoid the water in the mobile phone being scattered.

2) Do not use a hair dryer or stove to bake after entering the water, so as not to blow the liquid into the inside of the phone and damage the phone at high temperature.

3) Some mobile phones can be turned on and used normally after simple treatment, but mobile phones are composed of delicate electronic components, so there are hidden dangers after water ingress, so it is recommended not to try to turn them on.

4) Data may be lost during after-sales repair.

Extended Content:

Mobile phone daily use protection:

1. Put a small magnet on the screen, and you will soon find that the capacitive screen has a temporary failure, which will cause a permanent failure over time. So try to avoid close contact between your phone and your speaker or other magnetic objects.

2. The mobile phone screen is afraid of high temperatures. When the surface temperature of the screen reaches about 40 degrees, it may cause drift. Prolonged use at this high temperature will reduce the service life of the capacitive screen.

So in the hot summer, try to avoid exposing the phone to the outside, and playing games on an Android phone for a long time will also cause the machine to be hot, and the best way to deal with the high temperature is to cool it down.

3. The working principle of the capacitive screen is that when the finger touches the capacitive screen, the point current on the screen is taken away, and the screen evenly emits an equal current from the four corners to fill the position of the toilet paper press and position it accordingly.

Therefore, in the case of unstable transmission voltage, the effect of drift will occur. Try to avoid charging when the power is below 20, and if the power is low, it is better to charge it immediately and charge it as you go, rather than charging it after it is used up.

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Please bring your mobile phone to the customer service center for testing and processing as soon as possible to avoid unnecessary losses.

Precautions: 1) Do not move or shake the phone frequently after entering the water, so as to avoid the spread of moisture inside the phone.

2) Do not bake with a hair dryer or stove after entering the water, so as to avoid liquid being blown into the inside of the phone and damaging the phone by high temperature.

3) Some mobile phones can be turned on and used normally after simple processing, but mobile phones are composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn them on.

4) During the after-sales repair process, data may be lost.

1. The first thing to do Water ingress and crashing are the two taboos of mobile phone use, and the water ingress of mobile phones is particularly serious. According to an engineer from Guoxin, after the mobile phone gets into the water, the first thing to do is to turn off the power, of course, not to press the shutdown button, but to remove the battery. Because as soon as you press the shutdown button, the mobile phone will be powered on, and it is likely that a short circuit will occur, causing damage to the mobile phone, and then send it for repair as soon as possible.

If your phone's warranty has expired and you don't want to send it for repair, you can boldly take it apart! Wipe the parts of the phone with a tissue, and then blow it with a hair dryer for a few minutes, in order to ensure that all the internal parts are dry, it is advisable to air dry the phone for a few more days before you can turn it on again. 2 Once the mobile phone gets into water, remove the battery immediately, and do not turn it on immediately to understand the condition of the mobile phone.

After removing the battery, do not use a hair dryer to deal with it, and immediately send it to the repair professional to disassemble the machine for water treatment, such as falling into sewage or corrosive liquid, and use ultrasonic cleaning and drying before proceeding to the next step of maintenance. If the mobile phone can still be used after water penetration, it should be sent to a professional to deal with it to avoid corrosion of the circuit board and make it impossible to repair. 3 No matter what kind of water the phone falls into, you should remove the phone battery first and no longer power the phone.

If it falls into clean water, remove the battery and clean the phone with anhydrous alcohol, because the alcohol volatilizes quickly, and the water on the circuit board can be volatilized together. Then use a heat gun or hair dryer to dry the circuit board, and then power up the test machine, and most mobile phones will work normally. If it falls into the sewage, it should be cleaned immediately, and the dirt that can be seen should be cleaned first.

Use a brush to brush off the impurities attached to the pins of the components. Then, the circuit board is scrubbed with an alcohol cotton ball, and if the pollution is serious, the impurities must be vibrated out with the help of an ultrasonic washing instrument. Then use an air gun to dry the circuit board, and then repair all the chips.