Why can t UG4 0 be opened?

In the past, when it first came out, when the browser was upgraded to IE7, the ug would not be opened, and deleting the files in the ug directory could be solved. Now when I install it, whether it's IE7 or IE8, I can open the ug normally. You can refer to my **--- Haoyang UG mold design network.

Your computer name is wrong, right? Did you change the computer name in this file?? It has to be in English......There is also a ...... to start the license process first after installation

1.Copy the files in the crack folder of the disc to C:, modify its properties, and remove the read-only attributes.

2.Open the file with Notepad and put the first line as if it were server student5-06student5-06 in any 27000

The string is changed to the name of the computer on which the UG software is installed. The name of the computer. and save the file.

3 In the running CD, the installation license server file is the second in the running CD copied to the C drive to start the installation, a total of four, only install the last 3 until the installation is completed.

Have you solved this problem?

The license is not activated, click UGS license, click lmtools, click stop and then click star, it should be fine.

On the top floor 339043105 I've just reinstalled it and it works.

It is recommended to reinstall, open it with Notepad when installing, change the host of the first line to your computer name, and then install it, and the verification file is the one you changed.

This is a license installation error -15, I also have this problem when I install ug, and then I solved it with a one-click installation tool with ug, and it's quite convenient, it has a tool encyclopedia, which can repair the license with one click.

Because your UG license sometimes needs to be authenticated before it can be opened.

In this case, you first open the UG license, then open Start Stop Reread, click Stop Server first, then click Reread License File, and finally click Start Server.

I don't understand what that means, though. But I never made a mistake in pretending.

Please make sure that the registration file has not been corrected, and whether the installation order of the three files is correct.

If the above is correct, then change to UG software, your software is broken.

I haven't opened it for a long time!

You should still buy the genuine one to use it!

It's your license that hasn't started, you go to my computer and right-click will show a drop-down list, you click "manage" will appear a "service and application" and then click on it will appear "service" here you find the license English name, because the version is different, the English letters of the license are not the same, double-click to open and select "start" to open ug. Siemens PLM License Server My license looks like this, I here, the lower version is a little different, but it's basically the same. So you can give it a try, and I hope it can help you.

Uninstall completely, incompletely, the registry may have remnants that will affect the installation, mind reinstalling the system and then installing ug, pay attention to cracking the files that must be moved, and activate.

It may be that you did not completely unload when you unloaded, and it is recommended to use 360 software to manage the unloading.

I don't know if you just formatted the C drive and redid the system?

I've come across it before. Uninstall all the UG parts, find the area where you originally installed the UG, format yourself and change the computer name, and then install OK

The invalid file name is because you put the file in a directory that contains Chinese characters. ug can't point to a directory that contains Chinese characters, you just need to put the file you want to open in a directory that doesn't contain Chinese characters, for example: d:

ug\**prt。There is no mapping page, and you have to create a new file or open a file before it appears.

There are 2 situations: 1. You put the document sent by someone else under the path with Chinese characters. Because ug only knows the English path;

2. Your version is too low. The UG model file sent by someone else is made from a later version, maybe or something like that.

Lou has made it clear.

After UG is opened, you need to "create" to draw, and you can generally enter "modeling" for drawing 3D.

The ug should be in the English file name and saved in the folder with the English name.

Older versions cannot open higher versions of files. You can ask your friend to convert to Parasolid, STP (step), IGS (IGES), and then you create a new modeling document, and the file-> import ......, note that the files you want to convert should be placed in the English name folder.

1.Display: Wrong file name--- it should be that there is a problem with the file directory, and ug does not allow Chinese paths.

2.There is no cartographic page -- start from the beginning after creating a new file.

I guess you should not have cracked?

If you need it, you can hi me and I can help you install it remotely.

Prompt nx license error -15, this problem is easy to solve, first **ug one-click installation tool, open the tool encyclopedia, check the version you installed in license repair, click repair on it.

Make sure the original file and installation directory are in a non-Chinese directory!! If yes, just modify it!!