Nokia256M s memory card suddenly has to be formatted to use??

Updated on number 2024-02-09
10 answers
  1. Anonymous users2024-02-05

    This situation has also occurred on my memory card, and there are generally two reasons for this situation, one is that there is a problem when you use a card reader or a mobile phone directly connected to the computer to eject it, and hard plugging and unplugging is the most likely to occur this problem; In addition, if you take out the memory card and insert it properly, it is not inserted properly or there is an error, which can easily cause the memory card to be formatted before it can be used.

    If this problem occurs, you can turn off the phone, reinsert the memory card and turn it on, but generally this will not solve the problem too much. If you've tried everything you can and he still lets you format it, I'm afraid you'll have to format it.

    If you don't have something particularly important in your memory card, just format it directly, if it's particularly important, be careful when formatting, it's best to find a professional to help you format and then recover the data. You can also use some specialized data recovery software on the Internet to recover data on your computer immediately after formatting the memory card with your mobile phone.

    PS: I used to use data recovery software, maybe I don't know how to use it or some other reason, my stuff is all lost. Therefore, I advise you, if you really want to go to this kind of last resort, it is best to find a professional to format and restore it, otherwise you will have something to prepare for not being able to find it.

    Good luck!

  2. Anonymous users2024-02-04

    This situation is more common, because the memory card that has been used for a long time, will produce such and such storage logic errors, generally when the device can not read the data, it will prompt you to reformat, formatting will repair the logical error of the memory card, if it is not a frequent problem, the landlord does not have to worry, if it is frequent, it may be that the memory card memory particles are physically damaged, or the memory card interface is faulty, the specific problem depends on the situation, the question message over

  3. Anonymous users2024-02-03

    The solution is as follows.

    First, the memory of the mobile phone is called RAMIt is equivalent to a computer memory module, which is the running space of all software, including the system. When the prompts are insufficient, you can stop some running software.

    Second, the mobile phone storage is called ROM, which is equivalent to the hard disk of the computer, which is the storage that comes with the mobile phone, and the mobile phone operating system is hidden here, and the software can also be stored. More than 20 megabytes must be left as cache.

    Third, the mobile phone memory card is called TF, micro SD card, which is equivalent to a mobile hard disk, with a lot of space, and the disadvantage is that the running speed is slower than that of mobile phone storage. More than 20 megabytes must be left as cache.

    Fourth, don't open multiple apps at the same time on your phone. When closing the program, rely on the program's menu to operate, and do not use the on-hook key to exit. The background programs in the system are still running, and these background programs can be closed through the program management option (one-click cleanup) in the drop-down menu.

  4. Anonymous users2024-02-02

    You see if the memory card was taken down when you checked the machine, and did you think the memory card was full when you said it was full?

  5. Anonymous users2024-02-01

    Soft grid, hard grid have been tried? This shouldn't be the case.

  6. Anonymous users2024-01-31

    Is it hard-wired? The method is "broadcast number button + hang button + camera button at the same time and cannot be released, and then press and hold the power button until the pull screen appears"!

  7. Anonymous users2024-01-30

    It depends on whether you are a card or a grid.

  8. Anonymous users2024-01-29

    It is recommended that you try to change the memory card If you can, it is a problem with the card If it doesn't work, change the phone and try the memory card you bought, so that you can know whether it is a problem with the phone or the memory card.

  9. Anonymous users2024-01-28

    Then you can now have an ovi kit in the computer to back up the things in the phone! In the future, if you want to connect the previous things to the computer, just copy the backup files to your phone! **Number SMS can be backed up! The lattice machine is pressed.

    Meter well 7370 well.

  10. Anonymous users2024-01-27

    1. Formatting.

    There are many netizens who will say that "newly bought cards must be formatted", but in fact, this statement is not correct, and some cards can be used without formatting. But if you still want to format the memory card, you'd better use your phone to format it, but one thing to note: due to the limitations of the phone's own CPU speed and interface, the speed of formatting the card is slow, so be sure to keep the phone fully charged.

    According to the doctor's experience, it takes about 10 minutes to format a 512M card at a time, so the phone's battery should be kept at least 3 bars as much as possible.

    Sometimes the format of the mobile phone will fail, at this time, don't conclude that the card is broken, you can use the computer to format it again, but the formatted "format" must be selected "fat", otherwise the formatted card will not be recognized by the phone. If the computer can't be formatted either, you can use it again"mmcmedic"This software performs a repair. This software works with MMC and RS-MMC cards, not with SD cards.

    However, the repair of the SD card is relatively simple, and you can use a PDA or digital camera to format it.

    2. Memory card repair.

    After formatting, some cards will be unusable or there will be various errors in the process of use, then you can use the "Disk Utility" in the computer system to repair. Connect the card reader, then right-click on the drive letter where the memory card is located, select "Properties Troubleshooting", then select "Automatically fix file errors" and "Scan and try to recover bad sectors", but it may take a long time, so be patient.

    3. Data recovery in the card.

    When the memory card is deleted or formatted by mistake, the data in the card can be recovered as long as the data is not re-entered. If you have already lost a new file, you can sometimes recover part of the original data in the card, depending on the size of the new file. Here's how:

    The tools we need are computers, card readers, and"easyrecovery"Software.

    First, connect the card reader, open EasyRecovery, select the "Data Repair" menu, and select the appropriate option according to your situation, such as "Recover Deleted Files".

    In the second step, the software will ask to scan the system drive. Wait, once the drive is displayed, select "Full Scan" and if the card does not appear, you will need to reconnect the card reader.

    Step 3: Once the scan is complete, the directory recovery option will appear, which can be selected according to the specific situation of the data storage. For example, choose MMC (this is generally the name of the memory card), and the subsequent process is a fool's operation of the software I believe that the operation has reached this point, everyone will be clear, simply put, it is to choose a folder on the computer to store the recovered data.

Related questions
6 answers2024-02-09

After selecting the files to be recovered, the system will jump to this interface, asking you to select a logical drive to save the recovered files, here you must note that the selected drive must have enough remaining space, at least larger than the total amount of data to be recovered, this is very important, otherwise there will be data recovery failure. When choosing a drive, it is best to create a new folder, for example, if you want to restore to the X drive, it is best not to directly select the X disk in the target drive, so that the recovered scattered files will be directly copied to the root directory of the X drive, and it will be very troublesome to find the recovered data, so it is recommended to create a new folder named "shujuhuifu" in the X disk, and then point the recovery target to it, and it will be easier to look it up at that time. After selecting the recovery destination drive, we click Next, then make a cup of coffee and wait patiently for the recovery of the dataAfter a short system scan, the software will load all the disk letters inserted into the computer, select the partition you need to recover on the left, and click Next to start scanning the drive that needs to be recovered. >>>More

4 answers2024-02-09

cities land** piece.

system, private, sys, resource, installs are all things about system files and the software you install on the card, and generally not delete things here. >>>More

15 answers2024-02-09

This,I have this situation.,Landlord,It should be a USB flash drive virus.,This computer antivirus generally can't be detected.,There's mobile phone software to do it.,But I forgot.。 That is to say, there is a file that overwrites your original file, you can't find the original file, but you can still find it with XP Manager, you can use XP Manager to delete the U disk virus file that overwrites your file, but the virus can't be deleted. >>>More

12 answers2024-02-09

Poisoned to cause it! Reinstall the system once and take a look!

36 answers2024-02-09

If you put it on someone else's computer, it's 512, that's because the graphics card of the other computer's computer is independent and doesn't consume your memory, and your machine's graphics card is integrated with 256's memory, and the reason why it doesn't change is because the 256 is too small, and the motherboard is not allocated to the video memory, and the 512 is different, and the motherboard will automatically allocate the memory to the video memory, so it becomes smaller. >>>More