Welder Training, Welder Technical Training School?

Considerations for choosing a welding training school.

1. Faculty.

To measure how a training institution is, we must first look at whether its teachers are strong, what qualifications the teachers he hires, and how many years of experience he has.

2. Industry experience.

Secondly, it depends on the experience of the training institution, whether it has just done this training, or has accumulated a certain amount of training experience, and whether it is mature in the construction of the project.

3. Curriculum.

Whether the curriculum of the institution is scientific and whether the teaching content is in line with the market.

4. There is not much practical training.

To learn technology, especially welder technology, you must operate more and practice more in order to master it solidly.

How much does it cost to learn to weld, it's 3-4000 yuan at present;

Welder certificate (general name: welder operation certificate) This certificate is uniformly printed by the State Administration of Work Safety, and the IC card style is unified across the country. The certificate issued by the training center designated by the Work Safety Supervision Bureau after passing the training and then passing the examination of the Work Safety Supervision Bureau.

This certificate is valid for 6 years, and it should be reviewed once every three years, and it is common throughout the country and can be queried online.

Prerequisites. 1) Be at least 18 years old and meet the age requirements stipulated in the relevant types of work;

2) Have passed the medical examination of the hospital and have no diseases and physiological defects that prevent them from engaging in the corresponding special operations;

3) Junior high school degree or above;

4) Other conditions that meet the needs of the corresponding special operations.

If you want to engage in electric welding, you must need a work permit, which requires passing the examination to be issued.

Theoretical knowledge learning content:

1. Common welding methods (fusion welding;Pressure welding and brazing).

2. Manual arc welding, gas welding and gas cutting, argon arc welding, CO2 gas shielded welding.

3. The type of welding rod selection and storage, the model and use of welding equipment, and the form of welding joints.

4. The principle of the formation of the weld.

5. Selection of welding position (flat welding, vertical welding, horizontal welding, vertical welding) and welding process parameters (welding current, arc voltage, welding polarity, welding speed, etc.), weld layout and weldment structure, gas welding process and cutting process, gas welding and gas cutting of commonly used metal materials, argon arc welding principle, equipment use and welding technology.

6. Welding deformation and stress generation and prevention methods.

7. Causes and prevention measures of common welding defects.

8. Welding inspection.

9. Safety regulations for electric welding and gas welding.

10. Understand the welding characteristics and operation points of cast iron, copper, aluminum, titanium and other metals.

If you want to learn the downward welding technology of boiler pipes, pressure vessels, cellulose electrodes and pipes with high technical requirements, you can go to Shandong Jinque Mountain Vocational College Welder Training School.

With the deepening of China's industrial modernization and the acceleration of urbanization, China's steel consumption is increasing, and there are varying degrees of dependence on welding and cutting technology. Welding has penetrated into all areas of the manufacturing industry, directly affecting the quality, reliability, life and production cost of products, more and more materials use welding technology to connect, and the application field of welding is becoming more and more extensive. On the major recruitment**, you can easily find that the salary of welding-related positions is about 5000 10000.

It can be seen that welding technology not only has a large job demand, but also does not worry about employment, and the salary is also very considerable! However, welding is a very professional profession, and if you want to learn well, you must go through professional training and constantly summarize experience, and ordinary training institutions do not have the corresponding equipment and facilities and industry specifications. If you can't learn the real technology, it is undoubtedly a waste of time and energy.

Therefore, we must be cautious in the choice of school, Hunan Wantong electric welding major covers carbon dioxide protection welding, manual arc welding, gas cutting and plasma cutting, etc., which is the best choice for learning electric welding.

1. Employment prospects in welding technology.

1.Career status improvement: With the rapid development of China's manufacturing technology, it has brought unprecedented development opportunities to the welding industry. As an industrial "tailor", welding is a very important means of processing in industrial production, and the quality of welding plays a decisive role in product quality.

2.Broadening the scope of employment: Welding technology has become an independent discipline and is widely used in various industrial sectors such as aerospace, aviation, nuclear industry, shipbuilding, construction and machinery manufacturing.

3.Salary improvement: the average monthly salary per capita is more than 10,000 yuan, and the monthly salary of a few employees has reached 15,000 yuan, and the salary of welding professionals is significantly higher than that of other professions.

4.To be a shortage of talents in the industry: China's manufacturing industry is gradually developing towards high-end manufacturing, and many of the high-end manufacturing industries will be heavy industries. In any heavy industry manufacturing industry, welders will be extremely scarce professionals.

Second, Hunan Wantong welding technology professional advantages.

1.Short duration: 150 class hours, make an appointment to start the class, tailor the teaching content, and the teacher can be released in more than 20 days!

2.Strong equipment: advanced practical equipment, school-enterprise joint construction of training base;

3.Bao Society: "Double-teacher" teachers teach, practical training is the mainstay, and you can learn from zero foundation;

Welding is a short-term major, as long as you choose a good school, you don't need to invest too much time, you can get a job after studying. Students, we must recognize a reality, it is basically difficult to learn welding by yourself. "You will see it at a glance, and you will waste it as soon as you do it" This is a common problem in learning welding.

Welding is a very professional profession, if you want to learn well, you must go through professional training and constantly summarize experience, and ordinary training institutions do not have the corresponding equipment and facilities and industry specifications, if you can't learn the real technology, it is undoubtedly a waste of time and energy.

1. Electric welding is a technology, the factory is based on welding actual products, an apprentice who has no welding technology at all, the value of the products welded in the factory may be thousands or even higher, once the welding is unqualified, the loss is very large, so the general enterprise is unwilling to accept no welding foundation, even if the recruitment into the factory is also a handyman, not let the welding at all.

2. The production of the factory is piecework, if the welder master welds the product while taking the apprentice, it will inevitably affect the welding speed and further affect the piecework wage, so the welder master is not willing to take the apprentice and is not willing to teach the apprentice sincerely, as the saying goes, the apprentice starves the master, so they will have reservations. There is no need to worry about studying in an electric welding school, the teacher will teach by hand, and spare no effort to teach what he has learned to his students, so that learning electric welding technology is more secure.

3. Many of the welders in the factory are self-taught and have not received formal training, the welding method or welding posture is incorrect or not standardized, once the beginner does not learn the basics, it is difficult to change bad habits in the future, and it is difficult to practice exquisite welding technology.

4. There is a single type of welding in the factory, it is difficult to learn a comprehensive welding school welding technology at the same time, and it is impossible to obtain the welder certificate required by the state. Welding schools can learn electric welding, gas welding, argon arc welding, carbon dioxide protection welding, copper-aluminum welding, stainless steel welding and other advanced welding technologies at the same time, every day can practice operations, repeated practice, graduation can be used in the national vocational qualification certificate, special operation certificate, learn technology, get certificates, package employment trinity, for reference only.

Hello, the development of the electric welding industry is still very good, however, it should be notedThe welder is a special type of work, and the welder operation certificate is a certificate that must be held by personnel engaged in the welding industryand comply with fire safety operating procedures.

The welder operation certificate can generally pass the training and examination, and you can go to the local vocational skills school to participate, and you can obtain the welder certificate after passing the examination.

Short-term training for welders, zero-based practical operation, and rapid employment.

Welding major: 90 class hours.

The course content covers: basic theoretical knowledge of CO2 welding, welding safety protection, arc striking skills, transportation method training, flat welding skills, flat fillet welding (single-layer welding, multi-layer multi-pass welding), vertical fillet welding, etc.

2.Electrode arc welding: 90 class hours.

The course content covers: basic theoretical knowledge of electrode arc welding, welding safety and protection, arc initiation skills, flat fillet welding (single-layer welding, multi-layer welding, multi-layer multi-pass welding), vertical fillet welding, etc.

3.TIG Welding Major: 90 class hours.

The course content covers: basic theoretical knowledge of argon arc welding, welding safety and protection, basic arc initiation skills training, flat wire feeding skills training, flat fillet welding skills training, vertical fillet welding, rocker fish scale welding skills training, air plasma cutting, etc.

4. Argon electric joint welding major: 210 class hours.

The course content covers: electric welding arc skills, argon arc welding basic skills training, electric welding flat welding skills, electric welding vertical welding skills, argon arc welding flat wire feeding skills training, pipe arc welding skills training, pipe ARG welding skills training, plate-to-board horizontal welding single-sided welding double-sided forming, argon electric joint welding of pipe and pipe full position, etc.

5.All-round intensive course in welding technology: 300 class hours.

The course content covers: manual welding + secondary welding + argon arc welding.

Hello, electric welding is a pure technical learning, the learning time is short, generally 90-300 class hours, according to your own needs to choose, there are two welding welding, argon arc welding and so on.

There are many training schools for welders, and it is recommended to choose a school with a good reputation and a large brand to learn more systematically.

1. Welder is a better type of technical work.

2. Nowadays, young people rarely learn electric welding, and welding is hard work and tiring work in the impression of ordinary people, but in fact, this understanding is one-sided. Modern welders need a lot of theoretical knowledge and rich practical experience, and people with certain knowledge are easy to become good welders.

3. The salary of a good welder is very high. The monthly salary of welding masters is generally about 10,000 yuan.

4. It is easier for welders to find jobs, and a large number of good welders are needed in shipyards, metal structure factories, petrochemical industries, infrastructure projects, etc.

5. The light radiation and smoke in welding have adverse effects on the body, and labor protection should be done according to the regulations.

If you want to apply for a welder training class to systematically learn welders, you will not only be taught welding, usually electric welding, carbon dioxide protection welding, argon arc welding, argon welding, oxygen cutting, plasma cutting and other unified learning, it is recommended that you can go to a professional school to see.

**There are welder training courses as follows:

For welder training, you can go to Shandong Lanxiang Technical School Welding Technology College. Radical.

Shandong Lanxiang Technical School Welding Technology College has more than 200 AC welding machines, which can accommodate more than 1,000 people for internship at the same time. The college has a variety of advanced welding equipment such as silicon rectifier manual welding machine, carbon dioxide gas shielded welding machine, AC and DC argon arc welding machine, large rail submerged arc welding machine, steel bar butt submerged arc welding machine, plasma cutting welding machine, flash butt welding machine, spot welding machine, copy cutting machine, etc., and has advanced electric welding robots integrating cutting, cutting and welding.

Free trial is a special service set up by Shandong Lanxiang Senior Technical School to safeguard the interests of newly admitted students. This service is available from the School of Numerical Control, the School of Computer Science, the School of Welding Technology, the School of Automotive Engineering, the School of Culinary Cuisine, and the School of Beauty and Hairdressing.

Common accidents in welder operations:

1. Combustion accidents caused by welding sparks.

2. Burns and scalds caused by welding flames or candles.

3. Electric shock accidents and falling accidents that occur during the welding process.

4. Welders will cause lesions in blood, eyes, lungs, etc. during the operation. Ming Tangerine.

5. The radiation hazards that welders are often exposed to in welding include strong light, infrared, ultraviolet rays, etc. The X-rays produced by the electron beam in welding can affect the health of the welder.

6. During the welding process, due to the high temperature, the welding parts, welding rods, dirt, paint, etc. of the metal evaporate or burn, forming smoke-like vapor dust, causing poisoning.

7. The high-frequency electromagnetic field generated in welding will make people dizzy and tired.

The hazards of welding operations are not inevitable. As long as every welder strictly abides by the safety regulations of welding and cutting operations, these hazards can be prevented for junior welders, who often get electro-optic ophthalmia.

Learning welders, Guangzhou Wantong Automobile School is still very good. Welding is a very professional profession, want to learn welding needs to go through professional training and continuous summary of experience, and ordinary training institutions do not have the corresponding equipment and facilities and industry norms, if you can't learn the real technology, the poor car is undoubtedly a waste of time and energy, it is too worthless. Therefore, if you want to learn electric welding well, it is recommended to study in a professional and well-known school, so you should visit and understand more field trips.

1.First of all, you must have an idea before learning electric welding technology, such as what company you want to enter, you need to learn electric welding or carbon dioxide gas shielded welding or argon arc welding, what kind of positions to learn, whether it is flat welding, flat fillet welding or horizontal welding, vertical welding, vertical welding, vertical welding, vertical welding, you must have a number in your heart, you can apply it in your work after learning, and you should be targeted.

2.Practical training: welders should learn well, mainly six words "diligent study, think more, hard practice", hard training is the most important, through hard training to master the skills taught by the coach, standardize the basic actions.

3.Practice should be concentrated: training is very important, no practical operation is not good to learn welders, only let go of the mentality of eagerness, step by step to celebrate the reputation, in order to really destroy the skills to learn the hand, really use a lifetime.

4.If you want to learn from a high-level teacher, what is a high level, you can go to a school with better equipment, teachers and other conditions, this kind of school is relatively strong.

5.Before welding, we should carefully study the theoretical knowledge of welding, think while welding, and constantly summarize experience, so that the technology will progress.