How much GHz does the Pentium 3 have, and how much power does the Intel Pentium 4 3 00GHz have?

There are two types of PIII: copper core and Tualatin core.

The copper core has 500MHz- 1G (1G=1000MHz) and 370 interfaces, and SOLT1 interfaces.

Tulatin Core PIIII from PIIII-S 370 interface.

Depending on the model, the power is around 120 200W.

P43 0G has seven types: A, B, C, E, 539, 630, and 631, and the first three are front-end bus differences, which are 400, 533, and 800MHz respectively.

The fourth L2 cache is upgraded from 512K to 1M, the core is changed to Prescott, the fifth interface is upgraded to LGA775, the sixth L2 cache is upgraded to 2M, and the seventh evolves to the 65nm process, and the core type is CedarMill, which supports hyperthreading.

Hello, Pentium 4 high-frequency low-energy is quite power-intensive.

Your cputdp is 115W

The power consumption is really high.

I have tested, with the motherboard together with a low load of 88W, full load actually up to 150W

Hello landlord, your CPU is Pentium D 830 this model, thank you!

Pentium 925, this U performance is quite good, but the power consumption is larger.

Yes, but he's not a dual-core processor in the true sense of the word, as its L2 cache is independent rather than shared, so it's inefficient. Pentium D was actually launched by Intel in a hurry in the face of AMD's dual-core processor at that time, and it was packaged with two P4 cores together, so there were many disadvantages of Pentium 4, including high heat generation, high power consumption, and low execution efficiency (poor performance), so the Pentium D series was quickly eliminated, and even the worst dual-core Celeron E3200 is much better than it, because the latter is a Core 2 architecture, it is highly recommended that you do not buy it, it is not cost-effective, you can buy the E5300 processor, which can fully meet your needs, and now **400 or so.

Hello, yes, Pentium D, is a package of two P4 cores together, single core and two threads, one physical core, two logical cores, the old U of the 65nm era. At present, the main frequency of the Pentium D series of 45nm process does not have an integer.

Hope it helps.

If you only know about Pentium 4, you have to determine what the number of pins is, and then determine what CPU to replace.

First, the early P4 is mostly a 478-pin CPU, and the same number of pin CPUs can be replaced Second, the older P4 is a 775-pin CPU, and the estimated CPU generally refers to a 775-pin CPU. Therefore, you can directly buy a 775-pin CPU, such as: high QX9770, low E2160, one day, one ground.

3. The current P4 has 1136 pins Wait, it is estimated that it will not be such a CPU

P4, the former overlord of the Pentium 4 series, there are very few of them in existence, and they can be collected.

A graphics card of about 9600gt, no matter how high it is, it is not necessary, it is wasted.

What kind of motherboard are you, I suggest you change the CPU, this is too bad.

No power supply:

7600GT, 8600GT, HD4650, ** prices are 80 12000 14000

Power supply: 9600GT, HD3850, 3DMark03 20000 30000+

It is recommended to upgrade to a dual-core CPU, which significantly improves performance.

CPU refers to the main frequency of the CPU, which is simply the working frequency of the CPU during operation.

**The CPU (Central Processing Unit) is a very large-scale integrated circuit, which is the computing core and control unit of a computer. Its function is mainly to interpret computer instructions as well as process data in computer software.

**The processor mainly consists of combinators (Arithmetic Logic Unit, ALU), controllers and caches, as well as the data, control and state buses that enable the connection between them.

The Pentium 4 processor, which represented the high-end when it was first released, was the best configuration at that time.

1ghz=1000mhz

Pronounced as 1G Hertz is equal to 1000 megahertz is the frequency, the higher the frequency, the faster the processing, but with the progress of the times, the progress of the process architecture, the low-frequency processors that are still popular in the market are better than Ben Si.

It means that the main frequency of the CPU, the higher the frequency, the better the CPU performance (it is relative to the same level of CPU, such as Pentium 4 and Pentium 4, they are naturally better than the former, but if they are not of the same level, they cannot be compared, such as: Pentium 4 and Core E6600, they are not the same level, Pentium 4 belongs to the last generation of single-core products, Core is a dual-core product, the performance is better than Pentium 4) Note: GHz means gigahertz.

512KB refers to the L2 cache of the CPU, the larger the L2 cache, the more powerful the CPU performance, which we generally refer to as L2 for short

533MHz means that the CPU front-side bus is also as large as possible, but it is generally selected according to the motherboard. The unit is MHz, which means megahertz It means the main frequency of the CPU, the higher the frequency, the better the CPU performance (it is relative to the same level of CPU, such as Pentium 4 and Pentium 4, they are naturally better than the former, but if they are not of the same level, they cannot be compared, such as: Pentium 4 and Core E6600, they themselves are not the same level, Pentium 4 belongs to the last generation of single-core products, Core is a dual-core product, the performance is better than Pentium 4) Note:

GHz means gigahertz.

512KB refers to the L2 cache of the CPU, the larger the L2 cache, the more powerful the CPU performance, which we generally refer to as L2 for short

533MHz means that the CPU front-side bus is also as large as possible, but it is generally selected according to the motherboard. The unit is mhz, which means megahertz.

CPU refers to the computer ** processing, Hz is the unit of frequency, 1GHz = 1000MHz, so the main frequency of the computer is, which can indicate the speed of the computer processing commands.

P4 pseudo-dual-core. Hey.. 512 RAM The speed is okay. Use it for a long time 100% then sure your system is poisoned!

Referring to the clock speed of this CPU, the last generation of the Pentium 4 is 03 years old, how fast do you say it runs?

The former is single-core and the latter is dual-core. Of course, it's the E5200, but the difference between the two is not the same. Pentium D is a product that has been eliminated six or seven years ago, and this kind of CPU-based brand computer can only be sold for three or four hundred yuan now.

The e5200 was a mainstream product three or four years ago, and there are still some low-end brand computers in use.

Both of the above CPUs are obsolete products, and if you want to use them, it is recommended to use a better one.

E5200 is better, E5200 is dual-core and dual-threaded, Pentium D belongs to the architecture of the older U, does not support hyper-threading technology, and the performance is average. Fever is greater,

E5200, Core architecture, Pentium D, is 2 Pentium single-core glued together, high energy consumption, high heating, but low efficiency.

The Pentium D is single-core dual-threaded.

The e5200 is dual-core dual-threaded.

Pentium D is great! But it's all out of production!

Of course, it's the E5200, and the Pentium D is earlier than the Pentium E series, and the power consumption is higher than that of the E series.

This is a kind of CPU, the brand is Intel, and the Chinese name is Intel. Pentium4 represents the model of the CPU, the Pentium 4 processor of the Pentium series. This means that the main frequency of this CPU is 3GHz.