How to load a bicycle with a car, what are the car bike rack installation methods

1. If the general riders use the 4+2 way to ride for long distances;

2. Most of the front wheels, pedals, and chains of the bicycle will be removed in advance, and the front wheels, pedals, and chains will be firmly fixed on the bicycle body with cardboard isolation in the packing box;

3. In this way, the volume of the whole vehicle is greatly reduced, which can be loaded into the trunk of the car, and it does not take up much space. Once you arrive at your destination, reassembling it is also very simple. If it is a large team to travel by bus, the same treatment is also done, try to pack the bicycle into a flat cardboard box, so that multiple bicycles can be erected side by side into the trunk of the bus, and firmly fixed on the support rod with tape, saving a lot of space.

When placing a bicycle on the roof of a car, the roof rack is generally attached to the roof rack, while models without a luggage rack can also be secured by hooking it to the roof frame. When using such a roof rack, the two wheels of the bicycle are fixed to the front and rear of the roof rack, and the frame is fixed by a support rod, and the bicycle can be placed vertically or horizontally on the roof.

There is also a design of quick release of the front and rear wheels, which allows the front and rear wheels of the bicycle to be disassembled and assembled without any tools, making the transportation of the bicycle more convenient and the maintenance easier to learn. Removing the front and rear wheels of the bicycle and putting them in the trunk has become the preferred way for many car owners to carry bicycles.

Generally, you can hang the rear and roof of the car, you need to buy a bicycle hanger, install it on the car, and then hang the bike on the self-phase car hanger Chongzhi ride. It looks simple, but it's still quite complicated to put it into practice, because it's safe, safe, safe! Therefore, it puts forward relatively high requirements for materials, structure, installation, etc.

I myself have obsessive-compulsive disorder in the security area, and I have tried many different shelves, but after using a few models with limited funds, I decided to buy a domestic shelf with a good infrastructure for modification.

Bicycle: A bicycle, also known as a bicycle or bicycle, is usually a small two-wheeled land vehicle. After people ride on the car, they are powered by pedals, which is a green and environmentally friendly means of transportation.

English bicycle. where bi means two, and cycle means wheel, i.e., two-wheeled vehicle. In Chinese mainland, Taiwan, and Singapore, it is usually called "bicycle" or "bicycle" in bulk; In Hong Kong and Macau, it is often referred to as "bicycle" (actually Cantonese.

That's what it's usually called); And in Japan the fierce key is called "self-(phrasefix)��**) car".

1. First open the package, check the accessories and the like, and then cut the cable tie packaging.

2. We assemble the handlebar faucet first, and first put the faucet base facing forward, which requires loosening three screws. Then repent of the lead on the straight body.

3. Then we remove the card seat of the faucet, and then install the faucet with the water of the handlebar.

4. Then there is the front wheel, the front wheel installation we need to align the brake wheel, to see if the left and right of the brake wheel is the same as the rear wheel. Then remove the set screws and attach the front wheels.

5. After the front wheel is installed, it needs to be tightened with buckles and nuts.

6. Before tightening, you need to straighten the front wheel and the handlebar, and line straight with the body. Then tighten and fix.

7. We install two more foot pedals, the foot pedals are divided into left and right, and the pedals will be marked.

8. It should be noted that the left pedal is screwed in the counterclockwise direction, and the right pedal is normal clockwise.

Then use a wrench.

Tighten it. <>

9. For the installation of the seat, you need to insert the thin end of the steel pipe into the hole at the bottom of the seat, and then tighten the screws.

10. If there are mudguards, you also need to install mudguards and the like.

11. Then after the base is installed, there is a small buckle that needs to be tightened and then fixed, which cannot be forgotten.

There are three ways to install a car bike rack, which are:

1. Overhead bicycle rack is to fix the bicycle on the roof, also called the roof bicycle rack; Second, the trunk bicycle rack, this is a bicycle rack fixed in the rear tailgate, connected with the sheet metal gap of the rear tailgate by a metal hook, which generally does not affect the opening of the rear tailgate; 3. The trailer ball bike rack is directly set on the rear tow hook of the car.

A car bike rack is a device that attaches a bicycle or bicycle to a vehicle and carries.

Bicycle racks are currently divided into three categories: overhead, back-up, and trailer ball.

The first type is the top bike rack: also called the roof bike rack, the advantage is that it can carry the bicycle at the same time and travel quickly, professional, safe, stable, and deeply loved by bicycle clubs and professional athletes. The disadvantage is that after the roof of the car is fixed on the bicycle stove, the height increases significantly, and the passability will be affected to a certain extent;

The second type is the back bicycle rack: connected by the metal hook and the sheet metal gap of the rear tailgate, which generally does not affect the opening of the rear tailgate, the advantage is that compared with the overhead bicycle rack, it is more convenient to pick up and place the bicycle, and the disadvantage is that the metal hook that plays a fixed role will have a more or less certain impact on the body sheet metal, and sometimes the bicycle is suspended and may block the license plate.

The third type of trailer ball bike rack: also Shenchun called ball type rear tow hook bicycle rack, many vehicles can be installed at the tail of the 50mm diameter of the trailer ball, which is the European general trailer ball standard, the role of the trailer ball can not only tow RVs, motorboats or other equipment, but also carry bicycle racks, generally installed in high-end SUVs, MPVs or high-end commercial vehicles.

Photo by Li Yuanli) @2019

Cars are subject to fines for attaching bicycle racks to the rear.

Regulations for the Implementation of the Traffic Safety Law of the People's Republic of China

Article 54 The load of a motor vehicle shall not exceed the load weight approved on the motor vehicle driving license, and the loading length and width shall not exceed the carriage, and the following provisions shall be observed:

1) Heavy-duty and medium-sized trucks and semi-trailers shall not exceed 4 meters from the ground in height, and vehicles carrying containers shall not exceed 4 meters;

2) The height of other motor vehicles carrying goods shall not exceed meters from the ground;

3) The height of the motorcycle shall not exceed the meter from the ground, and the length shall not exceed the meter of the body. The width of the two-wheeled motorcycle shall not exceed the handlebar meter on the left and right; The width of the three-wheeled motorcycle must not exceed the body of the vehicle.

Passenger vehicles are not allowed to carry cargo except for luggage racks on the outside of the body and built-in luggage compartments. The height of the luggage rack of a passenger car shall not exceed 4 meters from the roof of the vehicle and 4 meters from the ground.

Hope this helps you, hope, thank you!!

There are two common types of bicycle platforms:

The first type is a clamp rear axle type platform.

<> the second type: roller-type cycling platform (you can directly call Seeqing to put the bicycle on riding.) ）。Zheng Grip.