How to tune guitar strings, how to tune guitar strings

Method. 1. Use the guitar tuning flute to calibrate the six open strings, blow the tuning flute E tone, tune the first string to the empty tone, blow the B tone, tune the second string, and so on.

Method. 2. Use the A note (6) of the tuning fork or harmonica or piano to align the open string of the fifth string of the guitar or the fifth A note of the first string. Then use this string as the standard tone to align the other strings.

Method 3: Use the first empty string note as the reference tone.

Adjust the 2nd string pitch so that the 5th fret of the 2nd string is the same as the 1st empty string pitch.

Adjust the pitch of the 3rd string so that the 3rd string 4th fret is the same as the 2nd open string pitch.

Adjust the 4th string pitch so that the 5th fret of the 4th string and the 3rd empty string are the same pitch.

Adjust the 5th string pitch so that the 5th fret pitch and the 4th open string pitch are the same.

Adjust the 6th string pitch so that the 6th string 5th fret is the same as the 5th empty string pitch.

One way to do this is to use "visual tuning", which means playing one note of the same degree and then tuning the other string until the tuned string resonates. Tune to the following state, play a note, and the other string vibrates naturally, vibrates with the previous note, and then weakens together without any fluctuations in between.

Here are the six open strings of standard pitch.

Method. Fourth, the overtone tuning method (overtone is to use the left hand to gently press on the 6th string or 12th fret of the guitar, the right hand plucks the strings at the same time, and the left hand is immediately raised, so as to stop the fundamental frequency sound in the piano sound and only retain the higher harmonics).

The first open string note is used as the reference tone.

Make the 5th overtone of the 2nd string the same as the 7th overtone of the 1st string.

Make the 3rd string 9th fret overpitch the same as the 2nd string 5th fret overtone.

Make the 4th string 5th fret overpitch and the 3rd string 7th fret overpitch the same.

Make the 5th fret overtone of the 5th string the same as the 7th fret of the 4th string.

Make the 6th string 5th overtone the same as the 5th string 7th overtone.

Buy a tuner.

From 6-1 strings are respectively.

eadgbe

Or you can use a computer to tune it.

There's a tuning software.

The symbol for each string is the same as above.

On the first floor, you will learn about octave strings.

The landlord will definitely not.

You can go to the piano shop and buy a timpani for a few dollars, and the sound from the six sound holes corresponds to the standard tone of the guitar.

You can also use other instruments to reference tuning, as long as you know the standard tone of the guitar and the pitch of the corresponding instrument.

From the thickest root, it is 3, 6, 2, 5, 7, 3

Bass, alto, treble.

The thickest one is the six-string, the thinnest is the one-string, and novices are better to find a teacher to tune or buy a tuning table, which is made in China for dozens of dollars

Buy a tuner.

Without professional training, it is generally difficult to tune the strings accurately.

It is recommended that the landlord do not check the method on the Internet, come to my space to see that my diary should be useful to you!

How to tune the guitar strings is as follows:

2. Open the operation page after Guitar Tuna.

The software has many functions, and the "tuner" button at the bottom is the tuning function.

3. Introduction to page functions.

I've marked the main features with numbers 1-10 in red.

1.Corresponds to the strings of the guitar.

2.Corresponds to the strings of the guitar.

3.Corresponds to the strings of the guitar.

4.Corresponds to the strings of the guitar.

5.Corresponds to the strings of the guitar.

6.Corresponds to the strings of the guitar.

7.Drifting to the red line is the standard pitch.

8.The drift area on the left side of the red line is pitched low.

9.The drift area on the right side of the red line is pitch.

10 .Software tuning function buttons.

1. String open string tone name e solfège mi

2-string open string note name b roll-call xi

3. String open string sound name g solfège so

4. Empty strings, tone name d, roll call re

5-string open string sound name a solfège la

6-string open string tone name e solfège roll call mi

How to tune the strings.

After playing the 1st string of the guitar, the corresponding "e" knob of the software will light up, and you will see that the drift circle is in the drift area on the left, **displaying "-30", which means that the tone is 30 digit units below the standard tone, and you need to tighten the knob.

How to tune the strings.

How to tune the strings.

After playing the 3rd string of the guitar, the "G" button corresponding to the display software will light up, the drift circle is green, the number is displayed "+4", and then fine-tuned to "0".

How to tune the strings.

After playing the 4 strings of the guitar, the "D" button corresponding to the display software will light up, the drift circle is green, the number is displayed "-4", and then fine-tuned to "0".

How to tune the strings.

After playing the 5 strings of the guitar, the "A" button corresponding to the display software will light up, the drift circle will be green, and the number will display "-4", and then fine-tune to "0".

How to tune the strings.

After playing the 5 strings of the guitar, the "A" button corresponding to the display software will light up, the drift circle will be green, and the number will display "-4", and then fine-tune to "0".