What is the difference between the national cost clerk and the cost clerk of the China Construction

The national cost officer, to be precise, should be the national cost officer qualification certificate, which is a kind of examination for national registration and provincial unified examination, and only this certificate is authoritative for budgeting.

China Construction Education Association, this certificate is not as good as the provincial self-run employment certificate, to put it bluntly, it is to generate income for this association, and it has no role in the cost industry. It is usually linked to a training institution, and generally students who go to training ask, do they have any certificates after studying? Especially for those who have just graduated, then the training institution will take out this certificate.

I can't complain about the training institution, it's just that the students attach too much importance to the certificate and ignore the essential learning, and it is not enough to study in the university for 4 years, and the certificate is returned.

Advice: The cost industry is different from before, young people must first be able to do work, and then go to the certification. Of course, it would be better to do it at the same time. I think you can understand what I mean.

That's what I trained. Don't be afraid to tell the truth and affect your business, as long as it helps you.

The landlord does not have the certificate of the national cost officer, only the certificate of the national registered cost engineer. The cost staff are organized by the local construction committee, and the certificate issued by the local construction committee is generally only recognized locally, and the registered cost engineer is the unified organization of the Ministry of Construction for the examination, which is common throughout the country. You said that the cost of the China Construction Education Association should be an association, it is recommended that the landlord do not participate in this kind of examination, if the cost of the examination is the kind of examination organized by the local construction committee, if the qualification is enough, take the national registered cost engineer examination.

The national cost clerk is registered by the state, and the cost clerk of the China Construction Education Association is in the construction industry.

Cost qualification certificate is to participate in the training of the field and engaged in engineering cost management (including construction, installation, municipal professional) work qualification certificate and legal certificate, only through the cost of the qualification of Wang Ge examination, to obtain the "national construction project cost qualification certificate", and through the registration to obtain the seal of practice, can become engaged in engineering cost activities of professionals.

1) Construction project quantity analysis, planning, organization and cost management, construction drawing budget, design budget preparation;

B) the construction project quantity list, the highest bid limit, the preparation of bidding;

C) the construction project contract price, settlement price and the preparation of the final account price.

The difference between a cost engineer and a cost engineer:

1.Level differences. The cost engineer represents a higher level of qualification;

2.Work permission differences. The cost engineer can only prepare but not audit, which means that there is no right to audit, while the cost engineer can;

3.Differences in the scope of use of qualifications. The qualification of the cost engineer is used nationwide, while the cost engineer is limited by the region, and the registration needs to be changed to work in another province or city.

4. The cost engineer is a professional qualification, and the cost engineer is a professional qualification;

Similarities between cost engineer and estimator:

1.Qualifications in the same industry;

2.The work content includes the preparation and review of pre-settlement.

3. The certificate is common throughout the country.

The cost engineer refers to the employment certificate, and the cost engineer is a professional qualification certificate, but it is a symbol of the engineer.

Yes, the lowest level of practice qualification certificate of cost staff and cost industry practitioners of the China Price Association, since it is a practice qualification certificate, it must be successfully registered before it can take effect.

Be. China Construction Cost Management Association, referred to as China Price Association, English translation name: China Engineering Cost Association, abbreviated as CECA.

Founded in July 1990, it is a national social organization with the consent of the Ministry of Construction of the People's Republic of China and the approval and registration of the Ministry of Civil Affairs, with the registration certificate number of 3369.

The association is engaged in engineering cost consulting services and engineering cost management units and registered cost engineers and senior experts, scholars voluntarily composed of national engineering cost industry association.

The Ministry of Construction's No. 150 ministerial order "Measures for the Management of Registered Cost Engineers" clearly stipulates that the continuing education of registered cost engineers is organized by the China Construction Cost Management Association. At the same time, according to the "Interim Measures for the Implementation of Continuing Education of Registered Cost Engineers", the training certificate issued by the education and training organized by our association and the provincial and departmental registered cost engineer management institutions can be used as a certificate of continuing education and learning of registered cost engineers.

The examination of the cost officer is not a national examination, the examination is organized by the provinces, but the certificate of the cost officer is common throughout the country and is issued by the National Construction Cost Management Association.

The cost staff is divided into construction engineering and installation engineering, and the construction engineering includes: civil engineering, gardening, municipal, decoration, etc.; The installation project includes: electricity, water, heating and cooling installation, etc. You can choose one of the majors according to your situation.

Examination subjects of construction engineering: basic knowledge and measurement and valuation of construction engineering;

Installation engineering examination subjects: basic knowledge and installation engineering measurement and valuation, these two professional basic knowledge parts are common, and the examination is the same set of test papers.

It is not the same, the national is issued by the Ministry of Information Industry in Beijing, and the national general province is issued by the provincial cost station, which is used in the province.

The national cost staff to participate in the training organized by Beijing, and through the examination obtained, generally every year in several large provinces will be held, I am from Fuzhou, at that time was to participate in the 5-day training, in the examination, through the national cost officer certificate, the training was in the local.

The provincial one is relatively simple, and through the training in the province, the exam is fine. You can take the test several times a year.

First participate in the cost engineer qualification examination, the examination passed, by the provincial, autonomous region and municipality directly under the Central Government personnel department issued by the Ministry of Personnel unified printing, the Ministry of Personnel and the Ministry of Construction unified printing of the cost engineer qualification certificate, the certificate is valid nationwide, and as a certificate of cost engineer registration.

Registration: As the registration authority of cost engineers, the construction department is responsible for the registration and practice activities of registered cost engineers nationwide. The competent departments of construction of the people's departments of the provinces, autonomous regions and municipalities directly under the Central Government shall supervise and manage the registration and practice activities of registered cost engineers in their respective administrative areas as the provincial registration and practice activities of registered cost engineers.

Cost engineers generally have to join the provincial, autonomous region, municipality directly under the central government construction cost management association. Carry out industry management for cost engineers.

Hello, the cost officer examination is divided into provincial and national examinations, in Beijing or Shanghai twice a year the examination is a national general, unified is the construction committee of the test center, is issued by the China Engineering Cost Association, this is a national recognition certificate. Hope it helps

Only the certificate issued by the annual national unified cost officer examination is used nationwide.

First of all, you are required to have the highest education (junior college, bachelor's degree), college graduation requires more than 6 years of work experience, bachelor's degree graduation needs to work for more than 4 years, cost engineer has four courses, and the difficulty is divided into people. If you have a lot of work experience, it is less difficult. If you are just joining the workforce, I recommend that you study more and accumulate experience before taking the exam.

However, it doesn't matter if there are unqualified subjects in the first exam, you can get the cost engineer certificate if you pass it within two years.

The cost engineer is a professional ability examination higher than the cost officer, and the professional scope of work is roughly similar to that of the cost officer, but the comprehensive ability and industry qualifications required are stronger, and the annual examination pass rate is not high. It is divided into A certificate and B certificate, A certificate is registered in a cost consulting company that can issue independent price appraisal report qualifications, and B certificate is registered in construction-related units, but does not have the qualification to issue appraisal reports. It is worth noting that the cost engineer professional examination is valid for life if you pass it once, but you need to register once every 4 years and re-educate it once every 2 years.

The landlord can take the certificate is nothing more than the cost of the cost and the cost of the engineer, the cost of the examination is required to have a certain amount of experience to take the test, compared with a few years after graduation from the bachelor's degree, a few years after the graduation of the major, the specific provisions of the Ministry of Construction "cost engineer management measures".

The cost engineer can manage the cost officer.

1. Cost personnel refer to professionals who have passed the cost qualification examination, obtained the "National Construction Project Cost Personnel Qualification Certificate", and obtained the professional seal through registration and engaged in engineering cost activities. Originally referred to budget estimators.

2. Constructor refers to the practicing registered personnel engaged in the key positions of general contracting and construction management of construction projects. The meaning of constructor refers to the comprehensive personnel who understand management, technology, economy, and laws and regulations, and have high comprehensive quality, who must not only have a theoretical level, but also have rich practical experience and strong organizational ability.

Data: First, the most important thing for the cost staff is to pass the professional level, be familiar with the drawings, the current price list, comprehensive and various quotas, building materials must be familiar, in addition to the calculation formula of the engineering quantity, the structural practice of the project, the concealed engineering, change and other professional to be familiar with the use, analysis of materials and calculation of engineering materials; Familiar with the sub-items and sets of items in the quota, and be able to communicate with Party A, supervision, audit and other departments; When bidding, you can comprehensively grasp the budget estimate of the project and the rules of bidding; The final accounts are not missing, and how to control the project quantity, fees, sub-items and other aspects is the most critical. and master related professional knowledge such as auditing, accounting, materials, design, etc.; That is, the ability is required to be more comprehensive.

Second, the professional division of constructors.

Different types and different nature of engineering projects, have their own professional and technical, the implementation of sub-professional management of the construction engineer, not only to adapt to the different types and nature of the engineering project to the professional and technical requirements of the construction engineer, but also conducive to the current construction project management system to connect, give full play to the role of the relevant professional departments.

There are 10 specialties for first-class constructors:

Construction engineering, highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering.

Water conservancy and hydropower engineering, municipal public works, communication and radio and television engineering, mining engineering, mechanical and electrical engineering.

There are 6 specialties for the second-level constructor:

Construction engineering, highway engineering, water conservancy and hydropower engineering, mining engineering, municipal public works, mechanical and electrical engineering.

Note: The original "housing construction, decoration and decoration" was merged into "construction engineering", "mining and smelting (civil engineering part)" was merged into "mining engineering", and "electric power, petrochemical, mechanical and electrical installation and smelting (mechanical and electrical part)" was merged into "mechanical and electrical engineering".

The difference is big. Clause.

First, the level is different, the level of the cost officer is relatively low, and the constructor is the project manager.

Second, the scope of practice is different, one is to do cost, the other is to do project management.

1. The difference between the cost engineer and the constructor lies in the different work directions: the cost engineer is responsible for the project cost, the constructor is responsible for the construction management, and the two need to cooperate with each other in the process of engineering construction.

2. The difference between cost engineer and constructor: different competent departments and different specific job responsibilities.

The cost engineer is a certificate issued by different departments of the Ministry of Communications, the Ministry of Water Resources and the Ministry of Construction, and is mainly responsible for and assists in the valuation, pricing and management of the project cost.

Constructors are mainly responsible for construction management. For example, arrange the construction plan, be responsible for the procurement of materials, arrange manpower, material and financial resources, and rationally allocate resources, so that the building meets the requirements of the specifications and drawings, ensure the smooth progress of the construction, and propose modifications to the unreasonable design.

The cost clerk is equivalent to a work permit for engaging in project budgets and final accounts, and you have this cost clerk to compile and review the certificate, and you can engage in cost; Constructors can be engaged in project management, or require a constructor certificate when bidding for projects; Two are not one nature.

The concept is different. 1.Cost officer refers to the person who has passed the examination and obtained the qualification certificate of construction project cost and is engaged in project cost business

A construction engineer is a practicing registered person who relies on professional technology and focuses on engineering project management, and recently focuses on construction management. The constructor is a compound person who understands management, technology, economy, laws and regulations, and has a high comprehensive quality.

Cost engineer To put it simply, it is to calculate the quantity of work, and the builder is the project manager.

It belongs to the junior (staff level).

The national construction project cost officer refers to the personnel who have passed the examination and obtained the "National Construction Project Cost Qualification Certificate" and are engaged in the project cost business. The most important thing is to be professional, to be familiar with the drawings, to the current price list, comprehensive and various quotas, building materials must be familiar, in addition to the calculation formula of the engineering quantity, the structural practice of the project, concealed engineering, change and other professional to be familiar with the use, analysis of materials and calculation of engineering materials; For the sub-items in the quota, especially the corresponding high ones that should be applied, the ability to convince Party A, the supervision party, the audit department and other departments; When bidding, the budget estimate of the project and the rules of the bidding can be mastered comprehensively; The final accounts are not missing, and how to control the project quantity, fees, sub-items and other aspects is the most critical. and master related professional knowledge such as auditing, accounting, materials, design, etc.; The others are dedication, commuting time, work positivity, etc.