How about Hansen doors and windows? Has anyone used it?

I have heard of this brand, the quality is very good, in fact, the doors and windows are bad, you can look at these aspects to judge:

1.Look at the materials.

The aluminum profiles used in high-quality aluminum alloy doors and windows, such as Fuxuan doors and windows, are in line with the relevant national standards. If it does not meet the standards stipulated by the state, it is inferior aluminum alloy doors and windows, which cannot be used.

2.Look at processing.

High-quality aluminum alloy doors and windows, fine processing, exquisite installation, good sealing performance, free switching. Inferior aluminum alloy doors and windows, blind selection of aluminum profile series and specifications, rough processing, sawing instead of milling, not according to the requirements of installation, poor sealing performance, switch is not free, not only leakage and rain leakage and glass bursting, but also encounter strong wind and external force, easy to push and pull part or glass scrape or bump down, destroy and hurt people.

3.See**.

Under normal circumstances, high-quality aluminum alloy doors and windows are about 30% higher than low-quality aluminum alloy doors and windows due to high production costs. Some aluminum alloy doors and windows made of aluminum profiles with a wall thickness of only millimeters have tensile strength and yield strength that are much lower than those stipulated in the relevant national standards, and are very unsafe to use.

At present, Hansen doors and windows are OK, I have installed Hansen doors and windows for three years, and the quality is really good.

Hansen doors and windows are still good, when this is still not enough to transmit the tension between the steel bar and the concrete, the end of the steel bar is usually bent up 180 degrees hook.

It's not bad, good doors and windows need good staff to do it to make a good product.

I think it's very good, I use this for home decoration, and the quality is very good.

I haven't used the doors and windows of this brand yet, but I've heard that some friends are using them, and I heard that they are pretty good, so if you want to use them, you can go to the store and actually take a look.

Hansen doors and windows are well-known brands in China and belong to the top ten brands of doors and windows in China.

Hansen Doors & Windows is a modern production and service door and window brand integrating R&D, design, production and sales, and service. Hansen doors and windows have German door and window technology, strictly control product quality, and strictly control every link.

Advantages of Hansen doors and windows:

With a simple modern style, the fixed glass is installed on the outdoor side, and the profile has a large indoor viewing surface, which maximizes the field of view as much as possible in the design concept, so that the field of view of doors and windows is more open.

Ultra-narrow edge design, wider field of vision, boundless beauty, equipped with 5+12A+5 insulating tempered glass or single-layer glass, with strong anti-collision and anti-impact performance.

Since its establishment, the company has always adhered to the pursuit of excellence in product quality, inherited the manufacturing spirit of German precision and rigorous, introduced German technology and equipment, strictly controlled product quality, from raw materials into the factory to the product factory, and then to the production workshop, equipment maintenance, logistics, warehousing, etc., every link is strictly managed, and every link is fully guaranteed quality and safety.

Precautions for purchasing doors and windows:

1. Doors and windows are easy to be contaminated with dust in daily use, once they accumulate too much, it will lead to the reduction of the aesthetics of the doors and windows, and there will be a situation of stuck, so they should be cleaned up in time to ensure their use.

2. If the doors and windows are stained with oily substances, it is more difficult to clean, so you need to use a special detergent to clean them. Note that strong acid and alkali cleaners should not be used, which can easily cause the hardware on the doors and windows to be corroded.

3. In the cracks of doors and windows, it is necessary to do a good job of cleaning, if it is found that there are particles left in the cracks, it is necessary to clean them up in time, otherwise the switch will not be smooth, and it will be easy to damage after a long time.

Hansen doors and windows are not the top ten brands of doors and windows, Foshan Hansen doors and windows were established in 2008, the establishment time is not long, in the industry belongs to the second-tier brand. Hansen doors and windows professional to provide aluminum alloy doors and windows customized production and service, product quality and service are very good, by the majority of consumers support and trust, at the same time, consumers on this brand is particularly high, is worth buying a brand.

Hansen doors and windows set research and development, design, production, sales, service in one of the modern production and service. Hansen doors and windows produce all kinds of high-grade aluminum alloy casement doors, folding doors, sliding doors, casement windows, and sliding windows.

Brand concept. Hansen doors and windows adhere to the product design concept of "paying tribute to the extraordinary", following the simple elegance of German product modeling, highlighting the texture. In terms of design, designers with international vision and local Chinese designers are combined.

Adhering to the scientific and rigorous process attitude, adhere to the development and design of products, comprehensively improve the safety and practicability of doors and windows, pursue the perfect combination of product function and design, and launch more products in line with the Chinese market, with consistent quality.

Is it possible to learn about it on the Internet, in fact, doors and windows can choose brands with more information on the Internet, such as Fuxuan. Of course, the following points should be paid attention to when choosing doors and windows:

First: the wall thickness of the profile can not be lower, the middle insulation strip should be guaranteed to be PA66 nylon instead of PVC, because the thermal expansion coefficient of PVC and aluminum is too different, there will be separation after a long time, the width of the insulation strip should not be less than 2cm, the heat preservation effect is not hot, the profile should have a drainage system, second: the glass should be energy-saving glass, the third: the hardware must be a brand, the fourth: the installation must be standardized, otherwise no matter how good the window, the effect will be poor, Staring at the installation and construction personnel, the foaming agent is full and the sealant is tightly sealed.

Now many doors and windows are written top ten brands, I want to go down ** There are so many top ten brands? The selection of products depends on the quality and service.

I've been using Hansen windows and doors for almost four years and I haven't had any problems so far. Now there are too many brands of doors and windows, no matter what brand, it still depends on the process, after-sales, and installation technology.

Hansen doors and windows are first-line brands, making high-end doors and windows, top ten brands.

Summary. Hansen doors and windows are made of German Haobo, imported SIEGENIA multi-point locking hardware and Technophonol heat insulation adhesive strips, and Hansen doors and windows have anti-oxidation, anti-fading, anti-frost and other properties. Thermal Insulation Coefficient:

K value sound insulation coefficient: RW+CU 386 wind pressure coefficient: P3 level, water tightness:

P 7008 air tightness: positive pressure: 10 grades-q:

018 Negative pressure: 10 levels. Whether it is a cold place or a hot and humid place, Hansen doors and windows can be well integrated into its environment and bring quality to your life.

Hansen doors and windows are made of German Haobo, imported Sagenia multi-point locking five destruction good gold and Tylenol heat insulation adhesive strips, Hansen doors and windows have anti-oxidation, anti-fading, anti-frost and other properties. Thermal insulation coefficient: slender k value sound insulation coefficient:

RW+CU 386 wind pressure coefficient: P3, water tightness: P 7008 air tightness:

Positive pressure: 10 levels-Q: 018 negative pressure:

Level 10. Whether it is a cold place, or a hot and humid place, Hansen doors and windows can be well integrated into its environment and bring quality to your life.

I hope the answer can help the pro, please give a thumbs up, thank you.

Both are very good, they are more famous brands, and the quality is almost the same, of course, if you have to compare, you can look at these points: 1. Look at the thickness The greater the thickness of the aluminum profile, the higher its firmness does not need to be said, correspondingly, the mute effect of its doors and windows will be better. When you buy it, you can test the thickness through the aluminum profile.

2. Hardware accessories doors and windows need to be opened frequently, so the light and smooth opening will make people comfortable and noiseless. Fuxuan door and window products make the direction and slide smoothly through the anti-swing positioning wheel, which effectively prevents the door from swinging when pushing and pulling, has stronger wind pressure resistance, and has almost no noise. 3. The sealing and well-made aluminum alloy doors and windows are smooth in addition to the splicing of aluminum profiles, and the glass glue must also be smooth.

Fuxuan door and window sealing strip uses ternary B stove mold propylene, anti-aging, to ensure a long time 4, double-glazed glass as an important group of silent doors and windows to complete the part, the impact on doors and windows is very large. Choose tempered insulating glass with 3C certification, in addition to superior sound and heat insulation performance; In terms of safety, the explosion will not be scratched after shattering.

1. Sliding door. Advantages: in line with the aesthetics of young people, simple and beautiful appearance, good decorative effect.

Compared with swing doors, the overall sealing performance is poor. The sliding wheel hardware is easily damaged and the service life is limited.

2. Swing door. Advantages: good sealing performance: excellent sound insulation, heat insulation, waterproof, windproof and sandproof performance. Safety and anti-theft: the hardware has good load-bearing effect and good anti-pry performance. Disadvantages: When opened, it occupies indoor or outdoor space.

3. Folding door. Advantages: beautiful appearance and atmosphere. The opening area is large, and the ventilation and lighting effect are good. Disadvantages: There are too many folding door leaves and the operation is complicated. Poor sealing performance. Limited service life.

4. a sliding window. Pros: Does not take up indoor space. Easy to operate. Disadvantages: The maximum opening area can only reach 50%, which affects the ventilation effect. Compared with casement windows, the sealing performance is poor, and the heat preservation, heat insulation, and waterproof performance are poor.

5. Inner casement window. Advantages: good sealing performance. Easy to clean and care. Disadvantages: When opened, it takes up indoor space. It is inconvenient to use screens, curtains, etc. when opening windows. There are safety hazards.

6. Inward opening and inverting window. Advantages: inward-opening and inverted windows, good safety factor. In the inverted state, it has good dustproof and rainproof performance. Excellent ventilation performance. Easy to clean.

7. Outer casement windows. Merit. Good sealing performance. Does not take up indoor space. Disadvantages: Inconvenient window cleaning. There is a potential safety hazard of falling window sashes.