What should I do if the Lenovo computer system installation fails?

You can choose the easy-boot USB flash drive to start the production tool to reinstall the system. The installation steps are as follows:

1. First of all, make the zhiu disk into an easy-to-start USB flash drive, restart the computer, wait for the DAO to appear on the boot screen, and press the start shortcut key.

Select the USB flash drive to boot to enter the easy-boot main menu, select the "Enter Win8PE environment to install the system" option, and press the enter key.

Confirm. 2. Enter the win8pe system, the installation tool will pop up by itself, click "browse" to select and save it to the system image in the U disk.

File. 3. Wait for the easy-start PE installation tool to automatically load the system image package installation file, just select the installation disk location, and then click the "OK" button. At this time, click the "OK" button directly in the pop-up prompt window.

Then the installation tool starts working, please wait a few minutes.

4. After completion, a prompt will pop up to restart the computer, click the "Yes (Y)" button.

5. At this time, you can unplug the U disk, restart the system to start the installation, we don't need to operate, wait for the installation to be completed, and finally restart it once before entering the system desktop.

Reasons and solutions for Lenovo original desktops that can't be installed in the system:

1) This is due to the fact that most of the hard disks of the computer are serial port hard disks, and the ordinary XP installation disk and the GHOST version of the installation CD, they do not integrate SATA control driver (or some are also integrated, but do not match the actual SATA control driver), resulting in incompatibility, and the hard disk cannot be recognized, resulting in the inability to install the operating system or blue screen normally, so it is necessary to change the mode of the hard disk, change the AHCI to IDE mode, and you can install it normally.

2) Here's how to change the hard drive mode:

Press del, go to the BIOS, and find advances---sataconfigaration--stata

modeselection--Change ahci to IDE F10 to save it

Or select Devices ATA

drives

setup→configure

SATAAS IDE" and finally press the F10 key to save and exit the BIOS.

What configuration of the computer, what system is installed, and the system fails to use a USB disk? Using a USB disk as a system is simple and convenient to operate.

This is an update from Microsoft. Automatic update failures are common. You try the update of Security Guard.

Hello, there can be many reasons why Lenovo notebook won't install software, here are some common reasons and solutions:1Insufficient permissions:

If your account doesn't have administrator privileges, some software may not be installed. You can try to install the software using an administrator account. 2.

Antivirus Blocking: Some anti-counterfeit software may falsely report certain software as viruses or malware and prevent it from being installed. You can try turning off your antivirus software before installing it.

If the installation is successful, reopen the antivirus software. 3.The system is missing dependent components or drivers

Software that has been installed or incompletely uninstalled: If the software has been installed before but has not been completely uninstalled, it may result in an alternate reinstallation not being called. You can try to uninstall the software thoroughly before reinstalling it.

5.Other software or services are running: If there is other software or services running, it may affect the installation of new software.

You can try closing other software and services before installing the software. If none of the above solutions resolve the issue, it is recommended to check whether the operating system and software version are compatible, try using a different installer, or contact the software vendor's technical support for assistance.

The reason why Lenovo computers have no way to reinstall the system is actually Lenovo's special protection technology, behind the case, pay attention to observation, you will find a toggle switch, this is the BIOS anti-write switch, as long as the switch is turned to the OFF position, it's OK, after the system is all installed, it can be used normally.

1. Close some startup programs. Start-Run-Enter msconfig-OK-Click "Start" in the "System Configuration Utility" window-Start, except for the input method (ctfmon) and anti-virus software, the general program can be turned off. You can also use 360 and other software to intelligently optimize boot acceleration.

2. Set the IP to a static IP, which can reduce the startup time of the computer and the reflection time after entering the desktop.

3. If there is a wireless network card that is not attacked with a chain, it is also disabled, which also has an impact.

3. Don't put too many files and icons on the computer desktop, which will slow down the computer's response, and don't install the software on the C drive.