After the computer system is reinstalled, the software cannot be installed and the installed softwar

Lenovo's whole machine will have a system backup file with write protection hidden in the hard disk,It should not be found under the system,It is recommended that you format the entire hard disk,Then partition it from the new partition,Try it in the writing system,Or I remember that Lenovo brand machine has a function to restore the system,I don't know if you don't bring it too machine,The system of rain and wood forest wind should not have a problem,If it is not a system problem, it is recommended that you check all your hardware,Tencent PC Manager has a function is computer experience, It can help you test out your hardware information, and the hardware problem is in **, you can try it.

Reinstall a better system, the system disks on the market are made by some people themselves, and the level is high and low.

Reinstall the system and find someone who is more familiar with computers to help.

You can use one-click recovery yourself.,,See if there's a red key on the host.,If there is,Some move down.,You can start recovery.,Follow the prompts step by step.。。 This is the software that the machine configures itself.

Find an original ISO image of XP3 directly on the Internet, and then burn it. Let's reload. There's a serial number or something. Brand machine with the original system. You also need to have the drive ready. Especially for network cards.

Scan the hard drive to see if there are any bad sectors.

After reinstalling the system, all software needs to be reinstalled. Many software needs to write relevant information to the system disk and registry in order to start the software. Before, the desktop was just a shortcut or icon of the software.

What should I do if the computer shows that there is no place to install the system when I reinstall the system, in a hurry.

If the computer shows that there is no place to install the system when reinstalling the system, it may be caused by the following situations: the hard disk is not connected to the hard disk, or the hard disk is damaged and cannot be recognized; The system installation file is corrupted and not booted correctly or the image file is corrupted; The hard disk partition table is corrupted or partitioned incorrectly. In this case, you can try the following:

Check whether the connection of the computer's hard disk is stable and ensure that the computer can recognize the hard disk normally; Check whether the installation file used is correct, or try to use a different installation file to install it; You can use some third-party disk utilities, such as Easeus Partition Master, to repair or partition. If the above methods still do not solve the problem, it is recommended to contact a professional maintenance personnel for inspection and repair.