What should I do if the floor is uneven when laying laminate flooring?

If the ground is uneven, it can be leveled by these 3 methods, self-leveling, cement mortar, gypsum, etc. Self-leveling is to treat the ground, polish off the protruding ground, and apply the surface agent after leveling, which needs to be applied twice. Cement mortar leveling is to dilute the cement slurry to ensure that it can flow, but not too thin, after the dough agent is dry, the cement mortar is pushed away and bulldozed, and it needs to be pressed evenly with a roller.

Gypsum leveling can be partially leveled, suitable for local uneven places.

Do a good job of ground leveling.

A large part of the uneven wooden floor is because the floor of the renovated house is not level, so before laying the floor, you must do a good job of the level of the ground, so that the laid floor will not be uneven.

The ridge should be level.

The wooden floor is laid on the ridge, and the ridge is laid by the construction party before the floor is laid, so before the floor is laid, it is necessary to carefully measure whether the floor is level with the construction personnel.

The floor should be bought ** licensed.

When buying wooden flooring, you must choose a brand and a regular merchant to buy, and you can also find a professional person to accompany you when buying flooring.

A contract is required for the laying or purchase of flooring.

Before purchasing and laying wooden flooring, it is necessary to sign a contract with the construction party or the flooring merchant to ensure that the wood floor can be effectively repaired or compensated when there is an inequality problem.

In any case, you must level the floor when you lay it, if you don't level it, the floor you lay will not be flat, which will affect the aesthetics, and it will also affect the life of the floor.

h hehehe. It should level you out.

Now there is a kind of cement called self-leveling, I believe it can solve your problem very simply, but your cost will increase greatly.

Yes, you can deal with it when you lay it.

Generally, the height difference is more than 2 cm, the ground must be leveled, even if the effect of paving the ground will be very poor, the paving can definitely be paved is a difference of 10 cm can also pave the floor for you. No matter how bad it is, it is recommended that you level it first.

If you are worried about the load-bearing problem, you can use the "Tao Lizhu" material, which is the material used to level the floor cushion of the building, which is very light and has a strong bearing capacity, and this material is used in civil engineering.

1. The use of deebot, the use of cement flat, all kinds of thickness have, the floor will not be flat, if not leveled, the floor must be leveled, but also will affect the life of the floor, the first can be determined according to the indoor height, the second anyway, will affect the appearance.

2. It is recommended not to dismantle. It should be laminate flooring here, and there is a little movement after the laminate flooring is installed. If it's not very serious, it's fine.

It's good to put something, it won't be like this after a long time. But it's a serious word. Just dismantle it, level the ground and then pave it.

It is recommended not to dismantle it, because removing the leveling will make the wall flower, etc.

3. If it is not dry, quickly remove it and redo the floor before paving.

Hello friends. We do wood floor installation. You're talking about laminate flooring.

After the laminate flooring is installed, there is a little movement. If it's not very serious, it's fine. You just put some bed, just put something.

It won't be like this after a long time. But it's a serious word. Just dismantle it, level the ground and then pave it.

It is recommended not to dismantle, because the leveling will make the wall flower, etc.

In any case, you must level the floor when you lay it, if you don't level it, the floor you lay will not be flat, which will affect the aesthetics, and it will also affect the life of the floor First, the use of DEEBOT, there are various thicknesses, which can be determined according to the indoor height.

Second, use cement flat, which does not take more than 12 hours with quick-drying agent.

If it doesn't dry thoroughly, quickly remove it and redo the floor before laying it.

If it's not serious, pay attention to use, but it really doesn't work, remove it and repave it.

No. If it is a laminate floor, it will expand directly, the surface will be deformed and blistered, and even warped.

Laminate flooring is made of cross-lamination of panels of different species of trees, and there is no defect of wet expansion and contraction of solid wood flooring, and the dry shrinkage and wet expansion rate is very small. In addition, laminate flooring has excellent dimensional stability.

The surface layer of laminate flooring has a specially treated wear-resistant layer, so the wear-resistant performance is very good. Secondly, it has a high hardness, and even if you scrape the surface with a sharp object, it will not scratch the floor.

Laminate flooring is a kind of flooring that is often used in home renovation, there are many types, and it is a versatile style. However, sometimes the laminate floor is high and low, and here we will discuss how to deal with the underlay flooring floor.

Floor laying requires the ground to be leveled, so when the ground is uneven, it must be leveled in some way.

First of all, you can use cement. First of all, the place with more serious height should be flattened, paved with the treatment agent, and then the cement should be mixed, not too dry, after the cement and treatment agent are dried, you can wipe the water wax beam mud to the ground, and then spread and smooth the cement.

Secondly, plaster can be used. Gypsum can be used in some areas without affecting the height of the ground, and the plaster dries quickly, is not expensive, and is easy to use. However, gypsum can only be used in places where the unevenness of the ground is not too serious, and it cannot be used on a large scale.

1. The large block is uneven.

As mentioned above, if the ground is uneven, you can use cement to make up for it, but if you want to improve the efficiency of decoration, you have to do this work in advance, otherwise the cement will dry out slowly, and the floor will be more humid if you lay the floor immediately, which is not good for the floor stool roller. In addition, the cost of leveling with cement is not expensive, and this work can be done by yourself.

2. Small pieces are uneven.

If the uneven area is smaller, then it is also mentioned above that plaster can be used. This method is also not expensive, the gypsum itself is relatively cheap, but the master who needs it must be professional, and the work time is not picky. Gypsum is very quick to use, you don't have to do a good job in advance like cement, gypsum can generally be dried on the same day, and it can be done all year round.

The above is the problem of how to deal with the laminate flooring floor, when laying the laminate flooring floor, we must pay attention to whether the ground is flat, if it is not jujube bureau leveling, it must be leveled in time, otherwise the composite floor will be affected, and it will not play its due effect, so you can try more.

You can get it for free

1. First of all, check whether the uneven area of the floor is large, if it is only a small area, you need to re-level the treatment, remove all the problematic floors, and then use gypsum to lay on the ground, to do a good job of leveling. It is also necessary to reinforce the ground and wait until it has dried before proceeding to the next step of construction.

2. Reserve some expansion joints for laying the floor to prevent the deformation of the floor due to the high temperature in the later stage, which will also lead to uneven ground. After paving, you can press it with a heavy object appropriately, and it can also solve the uneven phenomenon of the ground.

3. However, if there is a problem of unevenness in a large area, it needs to be reworked, and the amount of work is still relatively large. It is also necessary to level the ground, add plaster and white latex, mix it evenly and lay it on the ground. If the drop range is larger than 5 mm, it is also necessary to re-level with the cement mortar of the grip shirt, and finally measure it with a ruler, and the error is not large.

Wait until the leveling work is finished and re-lay the wooden floor.

What are the notes and meanings of uneven ground?

1. After laying the wooden floor, we are most worried about unevenness, and we only need to avoid these problems to avoid unevenness.

2. The ground must be leveled, if the foundation is not treated well, there will be unevenness, the level is inconsistent, and the floor tiles will definitely be uneven in the later stage.

3. When laying the floor, it is necessary to clean up the floating slurry or dust on the ground, and then choose cement mortar, and then use it to lay the floor after the accurate deployment. In addition, it is also necessary to leave a certain gap when arranging, otherwise it is easy to expand and shrink in the later stage, and there will be hollowing and arching.

Now many families will choose to lay wooden floors when decorating the ground, but before laying wooden floors, the ground leveling work should be carried out first, if the ground leveling work is not done, the wooden floor is easy to warp after laying, so how to remedy the uneven floor? How to lay wooden floors? Let's take a look!

1. How to remedy the uneven floor.

When there is a small area of unevenness after the floor is laid, the floor within the range can be dismantled, and leveled with gypsum, and the floor can be re-laid after leveling, but if there is a large area of unevenness after the floor is laid, it is recommended to contact the construction personnel and ask the other party to re-level the ground and lay the floor, so as not to affect the service life and aesthetics of the floor.

Second, how to lay wooden floors.

1. When laying the wooden floor, the ground should be cleaned up first, and the dust and garbage on the ground should be cleaned up, especially the position of the wall side, which should also be cleaned up, and then the ground should be leveled, and the ground level error should be controlled within two millimeters, and then the uneven place of the ground should be partially renovated.

2. After cleaning the floor, the plastic film needs to be laid, so that the floor can be avoided from being damp, the plastic film needs to be flattened, and the joints should be close together, and then you can start to lay the wooden floor, in the laying process, a short wooden floor must be laid next to a long wooden floor, so that the laying of the wooden floor is not easy to loosen, and the floor needs to be knocked tightly with tools after the floor.

3. After assembling the floor, it is necessary to use glass glue and edge banding sleeve to fill, and then it is necessary to comprehensively inspect the wooden floor, if there are imperfections that should be adjusted, you can install the stepping line after paying attention, and ensure that the joints of the stepping line are flat and tight during installation.

Summary: How to remedy the uneven floor is introduced here, when the floor is uneven, it is best to ask a professional to check and renovate, do not solve it yourself, so as not to have a bigger problem. If you want to know more about decoration, you can pay attention to the relevant information of Qeeka Home.

Home house floor decoration, pay attention to its flatness. What should I do if the floor is uneven? PChouse will take you to find out.

1. Self-leveling and leveling.

Self-leveling first carries out a general treatment of the ground, which requires the protrusion to be sanded off, and then the surface agent is applied twice on the polished and leveled ground. The ratio of self-leveling cement and water should be adjusted to 1:2 to ensure that the cement can flow, and at the same time not too thin, and after the interface agent is dry, the self-leveling cement is poured on the ground, and finally the cement is pressed evenly with a roller.

2. Gypsum leveling.

What should I do if the floor is uneven? It can also be solved by gypsum leveling, which can be used for local leveling, and the leveling thickness is about 5 20mm. The drying speed of this leveling method is fast, relatively cheap, and the construction is convenient.

3. Cement mortar leveling.

The last method of ground leveling is cement mortar leveling, which is suitable for all kinds of ground leveling before floor laying. However, this method leveling the thick bottom is relatively thick, and the cement mortar ratio is not right, which will cause the surface layer to be pulverized and sanded, ash and cracks.