When the temperature is too high, the car air conditioner does not refrigerate ,,,

Updated on home 2024-02-22
4 answers
  1. Anonymous users2024-02-06

    It's not refrigerated, it's still not cold enough, it's freon, and the compressor doesn't work.

  2. Anonymous users2024-02-05

    There are many reasons why an air conditioner is not cooling, it could be:

    1. The compressor belt or electromagnetic clutch is slipped, and 2. The piston of the air conditioner compressor is not tightly sealed.

    3. The condenser is dirty and blocked.

    4. The condenser cooling fan does not work or reverses.

    5. The expansion valve is faulty.

    6. Air conditioners lack refrigerant (commonly known as fluorine).

    7. The evaporation tank is too dirty.

    8. The air distribution system of the car air conditioner is faulty.

    9. The air conditioner filter is too dirty.

    10. The blower is faulty.

    It has come to summer, and the lack of air conditioning has a great impact on the driving and riding comfort of the people in the car, and there will even be cases of accidents caused by overheating in the car due to the lack of air conditioning. If there is a problem with the vehicle, you can complain to the vehicle quality network.

  3. Anonymous users2024-02-04

    1.The air conditioner is broken;

    2.The air conditioner does not refrigerate due to a power outage;

    3.The air conditioner is automatically identified and stopped by the thermostat.

    The specific inspection methods are:

    1.Check the compressor belt: if the belt is too loose, it should be adjusted, otherwise it is easy to make the air conditioning system poor refrigeration. Inspect the air conditioning system hose fittings for oil stains. If a leak is found, go to the maintenance office in time to solve it.

    2.Clean the condenser: Because the surface of the car condenser is cleaned, it is easy to dissipate heat energy to the outside world. Regular cleaning of the condenser surface can greatly improve the cooling effect of the air conditioning system.

    3.Check the refrigerant level height: Check the refrigerant level height.

    The glass peephole is usually installed on the lid of the dryer to operate the motor and air conditioning system to observe the flow of refrigerant through the glass peephole. If the air conditioner is working properly, you can see through the peephole that the clear refrigerant is constantly flowing, and there are occasional small bubbles at high temperatures

  4. Anonymous users2024-02-03

    The reason why the air conditioner does not cool or heat.

    First, fluoride deficiency. The most common reason why the air conditioner does not refrigerate or heat is the lack of fluorine, which is a normal situation, generally appearing in the old air conditioner that has been used for three to four years, and the refrigerant will be volatilized after a long period of use.

    Second, the voltage of the power supply is not enough.

    The power supply voltage is unstable, and often the normal voltage cannot be reached, which will also cause the air conditioner to be unable to cool and heat normally, especially during the peak of electricity consumption. Of course, this kind of problem is obviously not something that a skilled air conditioner maintenance master can solve, and we must start from the aspect of providing a stable voltage to solve the problem.

Related questions
20 answers2024-02-22

It's no problem if it's not over 100, it's high temperature now, it's normal.

16 answers2024-02-22

It's hot now. I have two computers. A fan is also cleaned. It also takes more than 50 degrees to wait for the plane. But I can. The air conditioner was turned on and waited for more than 30 degrees. The graphics card will not play games more than forty-five degrees.

7 answers2024-02-22

First of all, we should do the hygiene, especially the heat dissipation part. Then check to see if the fan is broken.

20 answers2024-02-22

Hello, do you have a guard plate installed under the chassis of your car? If a guard plate is installed, it may be that the guard plate is close to the engine. >>>More

7 answers2024-02-22

The flame formed by the mixed combustion of acetylene and oxygen is called an oxygen-acetylene flame. The oxygen-acetylene flame has a very high temperature (about 3200 °C) and is heated intensively, so it is the main flame used in gas welding. The combustion process of acetylene (C2H2) in oxygen (O2) can be divided into two stages, firstly, acetylene is decomposed into carbon (C) and hydrogen (H2) under the action of heating, and then carbon reacts with oxygen in the mixture to form carbon monoxide (CO) to form the first stage of combustion; The subsequent combustion in the second stage is an oak grinding based on oxygen in the air, in which the oxygen beam reacts with oxygen to form carbon dioxide (CO2) and water (H2O), respectively >>>More