-
Playing and playing on their own blue screen,Sometimes it automatically turns off,Sometimes it can't turn on,Take out the CPU and use the eraser,Wipe it a few times and Nima can be used,I'm wondering if there's a problem with the needle groove of the motherboard.,What's more incomprehensible is that the configuration is very high.,But it's always not going to go up.,Play games and cards.,You can only look at the web page.,This Nima is sick!
-
If the heat dissipation is not good, it will burn out, and when installing, you should be careful not to break the pins.
-
The faults I have seen are: can't install the system, crashes from time to time and restarts the blue screen, can't enter the sleep state, plays games and crashes, can't shut down normally, and it is a CPU The fault that burns down is an alarm sound like an ambulance. I think these should be all the failures that the CPU can have Khan
-
When the problem is mild, the system monitor will pop up an alert box on the screen to remind the user to deal with the problem. If the problem is more serious, it cannot be turned on directly (that is, the black screen is not displayed).
-
After the CPU breaks, there are 3 possible scenarios.
1. It can't be turned on, that is to say, even the power can't be started, and the computer doesn't have any response;
2. The power is turned on, the CPU fan is also turned, but the monitor screen is black;
3. The computer can boot, but there is an error when running some programs, or the system is out of order.
-
Generally, it cannot be turned on, and the heat may be abnormal.
-
CPU problems are rarely the case, and they are usually eliminated at the end.
There are many situations that arise, such as constant freezes, etc
You can use the super pie to test, if there is no crash after the complete run, then you can rule out the CPU problem first!
-
Once there is a problem with the CPU, it will not turn on seriously, and the heat dissipation will be bad or there will be some problems
-
You can scramble an egg with the heat sink of the CPU to eat, I'm hungry, I haven't eaten yet, have you eaten it?
-
Something is wrong with the CPU.
If it's serious, it won't turn on, or it won't crash if you can't enter the system.
Frequent crashes or automatic restarts.
-
1. It can't be turned on, that is to say, even the power can't be started, and the computer doesn't have any response; It can be turned on, but the screen is black, and the boot is normal, but running some programs will be stuck.
-
The symptoms of CPU damage are first and foremost ensured.
The line connection is normal.
The power supply is normal.
The motherboard has a normal power supply.
The symptoms of CPU corruption are as follows.
1.There is no hardware prompt sound when the power is turned on.
2.Black screen. Causes of CPU corruption.
Left in a humid environment for a long time without using it, running for a long time when in use, not using it for a long time, and not cleaning the material between the CPU and the fan.
The BIOS is not set to automatically reboot or shut down when the CPU temperature is too high.
Protects the CPU from damage.
For long-term non-use, it is better to plug in and standby for a period of time, the longer the better.
If you place it in a humid environment for a long time, it is best to clean the glue between the fan and the CPU before use, and leave it for a period of time, or plug it in standby, the longer the standby, the better, preferably for a day or two.
The BIOS sets the temperature alarm to restart.
If it is found that every time the machine is turned on or frequently runs at high speed, it is recommended to reinstall the system frequently (as the situation requires).
-
Fault performance: the host does not start, the work is unstable, and it is easy to crash. Fixed a certain software can not be used, etc. Troubleshooting:
The only way to fail a CPU is to use the replacement method, which uses a normal CPU to replace the system and observe whether the same failure will occur. The CPU is broken, and the computer can't be turned on. It's just that the CPU fan doesn't turn, and the CPU can't be turned on if it's broken, but the fan will still turn Generally, the CPU can't be repaired after it's broken, and it can only be replaced with a crash, the motherboard alarms, and a black screen, I think it may be that your computer is too old, and the CPU performance is not good, so it is recommended to upgrade the computer or replace it with a new one!
-
Playing and playing directly stuck (the system is unresponsive, and even the mouse pointer can't move) blue screen, there is a string of errors**.
The blue screen flashes once, then restarts automatically, and keeps looping.
It is normal when it is turned on, and then it gets stuck more and more until it crashes (common in summer, usually the CPU fan is broken, or the cooling system is not good).
If you can't enter the system and hear a sharp alarm sound (the system self-test failed, the CPU temperature is too high, or there is a problem with the BIOS settings), then you can enter the BIOS settings, press the F8 key and press the Y key to confirm, and finally press it"esc"Save to exit. If it doesn't work, the CPU temperature is too high and hardware cooling is needed.
100% CPU usage will reduce the efficiency of the CPU, so it is recommended not to open too many programs that occupy the CPU at the same time.
-
Virus. If the CPU is broken, it will either be a blue screen or a crash, or more seriously, it won't turn on. Let's redo the system.
-
CPUs generally don't break easily. Unless the heat dissipation is not good and the CPU burns out. You may be poisoned, it is recommended to clean up the garbage and disinfect the virus.
-
Try reinstalling the system. It's a problem with the system.
-
1. If there is a problem with the heat dissipation of your CPU, that is, the fan can be broken, or the fan blades of the fan are broken, which affects the heat dissipation, it is recommended to change the fan (check first).
2. For system problems, it is recommended that you use XP, not Vista, because compatibility issues are involved here.
3. Poisoning, the virus affects the CPU to make it highly operational.
Solution. 1. Full antivirus, see if there is a virus, I know you don't have antivirus, I recommend taking the network cable in safe mode.
2. Reinstall the system and install XP.
3. Check the fan, and if it's broken, replace it.
-
Consider a few points:
1.Poisoning, I've seen viruses like this, specifically occupy the CPU to make it highly operational, causing blue screens and so onIf the fan is not in good contact or is broken, it is considered a thermal problem.
3.Memory problems, poor on-board contact such as quartz.
4.Wiring is caused by moisture or dust.
Recommendation 1Clean it up first.
2.From doing the system.
If you can't send it to the repair station, it depends on your configuration, which should be within Sony's warranty.
-
Oh brother, it's okay, it's normal, there's no problem with your CPU, those guys will actually say that your CPU has something to do with the system, and there is still one"Vista was originally a transitional system"It's funny, it's funny!
E8400, it has energy-saving, automatic downscaling and other functions, that is, Intel's CE1 and EIST technologies!
When your CPU is in low power consumption, the CPU will automatically buck the voltage and frequency, so that the temperature is also low, and it is also more economical, when your system is in a game or high power consumption, the CPU will automatically be woken up to the highest frequency, and the voltage will be up, you can semi-close the CE1 and EIST functions through the BIOS, but I don't know what motherboard you are using, but you can choose --- on the desktop, right-click --- properties--- screen protector--- power supply"It's always on"--OK, you can keep the CPU in a stable state!
If you're using a GIGABYTE P43-P45 motherboard, please turn off the Dynamic Energy Saving software!
-
It is recommended to change to the XP system.
Vista was originally a transitional system
There is also a check for the heat dissipation of the CPU.
Clean and clean the motherboard, wipe the gold finger, and wipe the fan to wipe the dust.
It should be solved.
-
How can you be sure that the CPU problem will be like this, and it will be like this when there is a problem with the hard disk, which occupies a high CPU, and it is easy to crash when it comes to reading and writing bad sectors of the hard disk.
Comprehensively detect the hardware once, such as the efficiency source, HDD, and other hard disk software, CPU-Z, etc., Master Lu looks at the temperature, occupancy, etc., and judges that there is a problem with the computer.
-
Without the blue screen of death, you can be sure that there is nothing wrong with your hardware. But it's just a blue screen once.,Initial suspicion is the system.,You can redo the system to try.,You can also use the 360 system first aid kit to try.。 If it's still OK, it means that there is a problem with the hardware, the first suspicion is the memory, wipe the gold finger part well, and change the nest, if it doesn't work, it's the motherboard.
CPUs and graphics cards don't have such problems. Remove all the motherboards and carefully observe whether the motherboard has capacitors leaking and bulging. In your case, if you rule out a system problem, it is a problem with the motherboard Your CPU temperature is normal, don't doubt it.
Most of the memory is poorly contacted.
-
There is a high chance of poisoning, and there may also be conflicts after software updates (I have encountered one in this view), so restore them first to have a backup of the system or reinstall the system to see.
-
It could really be a heat dissipation issue.
The CPU is used at a low frequency when the temperature is high to ensure safety.
Check if the CPU fan is installed!
-
If the temperature is normal to rule out the CPU fan problem, the blue screen indicates that there is a hardware problem or a software conflict, depending on your situation, it suddenly appears during use, and it is normal to use it before, and then rule out the hardware problem.
If you look at it this way, it's poisoned.,The symptoms also match the symptoms of poisoning.,Don't believe in anti-virus software.,I'm from the computer city.,It's normal that poisoning can't be killed.,It is recommended that you quickly format all hard disks.,Reinstall the system.。
-
The temperature is very normal,Even a little low,8400It's a dual-core four-wire,There's a problem with your host,Causing the frequency of your processor to become the same frequency conversion as the notebook,Hahahahaha,If you're the previous 8400, it is recommended that you go to the specific test,Not only hosting,Because there may also be a problem with the power supply,If it's the current 8400,That's too simple,Warranty go,Hey, hey, hey.
-
Go to the power management of Win 7, take a look at the power supply plan, choose the highest performance option to try, and plug in the power adapter to see if the speed is faster. Intel has a special power management method for mobile platforms, which automatically adjusts the CPU frequency according to the power supply, and when the power supply is the most sufficient, that is, when the external power supply is connected, the CPU will run at the highest frequency, otherwise vice versa.
-
Reinstall your operating system! If that's still the case, consider whether your CPU has a problem cooling the heat!
-
Persisting at about 50 percent, the CPU temperature rises quickly, sometimes to 70... I was afraid that I would burn and there was a way to skip the client, but I didn't interview under Vista, you open IE first, and then click on the tool.
-
Check it, is there more dust on the CPU fan, if you clean it up more, it will be fine, there is more dust, the number of fan revolutions is reduced, and the heat dissipation speed is slow.
-
Either your heat dissipation is a problem or a system problem, reinstall it once and take a look.
-
Open the window and turn it off and blow it for a while
-
The CPU temperature is too high. It is recommended to change the fan.
-
Hehe! If the CPU fan is still running, you can do the system.
-
Personally, I think it's a software problem, and reinstalling the system can definitely solve it.
-
If your board is 865, it can be started. But if it's 845, it's not necessarily, and this involves the problem of external frequency.
845 is the highest 333 external frequency, but many 845 motherboards only have 266, your previous CPU is under the 266 platform, less than 333 can not work, 865 board is supported 400 external frequency, can be compatible with the previous CPUs, of course, Celeron can not be pointed.
There are about two types of alarm sounds, one is memory contact and the other is graphics card contact. Your first time you can't start because of contact issues.
Unless your 865 is misread, or there is a lock on it, it should be able to light up.
Can't light up and can't see English.,You can see either your BIOS doesn't support the current CPU.。
-
Reset the motherboard settings, remove the coin cell battery and let it short circuit to discharge.
-
SCOM Clear! Nothing is broken, don't listen to them scare you.
-
p4 is bad.
Now your small module of mothballed blos is also broken.
You change the motherboard or re-solder a blos program to integrate the mothballing module.
-
CPU issues or your motherboard doesn't support P4
-
The long sound is a memory issue. Short sound is the graphics card. Learn a little, brother.
All 865s support P4 for sure.
If you change U, many motherboards will be re-recognized, and the BIOS may also be restored.
Discharge the BIOS first, and then try.
-
- Everything is fine on your computer.
The RAM CPU is all good.
There are two reasons for this.
1.Your motherboard battery is dead.
Just change the battery...
2.Check whether the hard drive cable is wiped properly
-
It's a memory problem, so loud.
-
There's a good chance that the CPU front-side bus is 800MHz, so your 845 master doesn't support it, and maybe you're a bad one.
Solution: If it's not bad.
There is a jumper on the main version, just plug the jumper into it, you can see how to plug in the jumper in the main version manual, and you can also brush boos to solve the problem.
There are only two ways that you may not be able to figure out on your own.
It doesn't cost much to find a computer fixer.
Note: Don't let the computer fixers fool you
Hello: I'll come to your questions. How to turn off the auto-wake feature. >>>More
1.Check whether the charger socket and connector part are empty, if it is empty, then it can lead to poor charging, and the situation you described will appear. >>>More
Follow the steps below to improve your computer's running speed and Internet speed: First: Close redundant programs Second: >>>More
Select "Open With" to select the CAD program from the list, if it is not in the list, you need to manually specify the location of the main CAD programIt can also be modified directly through the folder option, click"File type"After finding the DWG, you can open the program and modify it to CAD.
The meaning of this letter is "initialization failure", and two methods should be able to solve it: 1: You reset the next road, the normal icon is indeed empty, this is normal, pay attention to the platform settings must choose the empty icon. >>>More