Everybody help me load up the chassis, Master 1 is coming

1000 yuan? It's a little tight, but I'll give it a try:

CPU: AMD Sempron dual-core 2100+ AM2 (65nm box), about 200 yuan, low-cost and value-for-money CPU, the performance is not weak, game learning is a piece of cake!

Motherboard: Spartak PA78GM5, around 399, chipset makes 780G integrated 3200 graphics core, onboard 64M video memory, supports dynamic sharing and hybrid crossfire, game killer! Absolute value!

Memory: Kingston 1GB DDR2 667,65 yuan or so, this makes a must-have.

Hard disk: Hitachi 80g 7200 rpm 8m (serial port 3 year box), about 240 yuan, although you want 80g, but I remind you that now 160g is only about 20 yuan more expensive than 80!

With the rest of the money, you can choose a host and power supply (fan) of your favorite style, probably a little more than a thousand is enough!

1000 pieces can't be equipped with a separate display, if you don't have a separate display and an optical drive, it's almost the same.

Your question is very vague, I don't know how, do you want to use 1000 to get a host?

One word is hard. I'm afraid I can only go to the second-hand to see a mix of the old and the new.

Buy iron sheets, paints, rivets and other items first.

Then according to the actual size, the iron sheet is made and fixed with rivets.

Note: Minimize bending, referring to the design of the chassis to be assembled from bent sheet metal.

Then, according to the fixed position of the motherboard, make the corresponding holes and fix the screw posts.

Then fix the motherboard, power supply, etc., and you can:

1.Measure the bezel size of the fan.

There are two main sizes of computer fans in use: 80 mm and 120 mm long. Your computer may support other fan sizes, such as 60mm or 140mm. If you're unsure, you can remove your existing fan and take it directly to your local computer retail store.

Most cases now use 120mm fans.

2.Measure the bezel size of the fan.

Check your computer case. Find space inside the case where you can install a fan. Typically, there will be a place to install a fan on the back, sides, top, or front of the case. Each chassis has its own fan configuration and maximum number of installation requirements.

3.Try to choose a fan that is larger in size.

If your case supports multiple fan sizes, then in general a larger fan will work better than a smaller one. The 120 mm fan is noticeably quieter and produces more airflow and efficiency with a single rotation.

If you want to install the case, it's very simple, just open it as a button to install the case, so you can install it.

The first thing to choose is to choose a good hard disk for the buck chassis, and then choose a larger memory module, so that basically your configuration is OK.

It's easy to install the chassis, just put each case out and put it out.

How to install the chassis is to open his top cover and install the memory module and CPU into it.。。

The steps of packing can be to put the fragile items on top at noon and then grab them with foam.

For computer cases, we're doing the assembly. Be sure to secure the screws of the motherboard and chassis. And one is to install a variety of accessories.

The chassis puts the fan radiator in, and the parts are arranged according to the parts, and its internal facilities.

This is still relatively easy, just buy a chassis, and then buy a bunch of equipment, just contact.

That case must be installed in that case, otherwise there is no way to operate it.

How to load the chassis? You should go to the computer store to check the contents of the case.