Optical drive does not read disk XP system, winxp system after installing virtual optical drive does

Are you sure it's an optical drive?

As you say: there are only a few reasons.

1. There is a problem with the data cable connected to the optical drive or the interface.

2. The motherboard menu BIOS turns off the interface of the data cable, if you don't know how to restore it, you can restore the motherboard menu.

The easiest way to do this is to remove the motherboard battery and put it back in.

3. Your power supply is not enough Power supply is insufficient.

You change a disc with an icon (such as a branded driver CD), see if the icon of the G drive (disc drive letter) has changed, if it does, it means that the disc drive is good! If not, prove that the cable of the optical drive is not properly connected or that the optical drive is broken.

You can change the *** mode to the cd mode, the main thing is the system problem.

Or a data cable issue.

According to you, I can only guess that there is something wrong with the data bus...

It is recommended to change the IDE or SATA cable and take a look.

Recently there wereWinXP systemUsers to this site to reflect that encountered such a problem, that is, after installing the virtual drive software in the computer, found that the real optical drive can not read the disc data, the optical drive icon has also become CDROM, what to do, for the winxp system after installing the virtual optical drive optical drive does not read the disk of this problem, which brings you a specific solution. Troubleshooting Method:

1. Find the virtual optical drive software you installed in the control panel, and then uninstall it completely;

2. If you still can't read the disc after uninstalling the virtual optical drive, then we open the "Device Manager" (right-click on my computer - Properties - click Device Manager);

3. Click "View" in the menu and check "Show hidden devices";

4. "Non-plug and play driver", and then bounce in it to find the driver base core of the virtual optical drive you have installed, and delete it;

5. Restart the XP system after deletion.

After the above methods, you can solve the problem that the optical drive does not read the disk after installing the virtual optical drive in the winxp system, is it very simple, I hope this tutorial can help you.

The virtual CD-ROM software was installed on the WinXP system, but then it was found that the real CD-ROM could not read the data of the CD-ROM, and the CD-ROM icon was also changed to CDROM, and what I knew was that the CD-ROM was not damaged. So how can this be solved? Let's take a look at the specific method of solving the problem.

Recommended:The latest XP system for notebooks

1. Find the virtual drive software you installed in the control panel, and then uninstall it completely;

2. If you still can't read the disc after uninstalling the virtual optical drive, then we open the "Device Manager";

3. Click "View" in the menu and check "Show hidden devices";

4. "Non-plug and play driver", and then find the driver with light in the virtual optical drive you installed, and delete it;

5. Restart the XP system after deletion.

The practicability of the optical drive is not very high, but if it is not used for a long time, it is necessary to do a good job of maintenance and maintenance, otherwise the optical crack rent per mu drive will soon be invalid.

The disc driver is not installed, just reinstall the driver.

The driver of the optical drive is not installed, and the driver can be installed.

Install the optical drive. Turn on DMA again. It won't get stuck there.

It stands to reason that XP is driven, and it is possible that there is a problem with your data cable.

The disc driver is not installed, just reinstall the driver.

First of all, you need to determine whether you have disabled the sound card (go to the device management to check the status of the sound card), if it is not disabled, just see if the driver is normal (also check in the device management), if not, and then see if the sound card is exclusive to other software, if not, it is the sound card failure, you need to replace the sound card, under normal circumstances, the probability of the sound card is not bad, it should be the first 3 cases, carefully check should be able to succeed.

If you have a problem with the sound card driver, or go to the control panel and find the audio settings to see if there are any wrong setup steps.

Check the sound card or sound card driver, or look in Device Manager for abnormal markings (yellow) on the sound card

Is this okay to reboot?