How to install dual memory How to install dual channel memory

Just plug it in.

It's no problem to recognize them all.

If there is a slot that you don't recognize, try it.

Just install 2 sticks.

However, only single channels can be opened.

You can sell the 256 for the 512 one.

Only those with the same capacity can open dual channels.

I'm a computer science major, so I suggest you go for something big!

Just plug that 512 into the first slot, which is near the CPU!

It's good for you!

See more than two memory sockets on the motherboard?

If you see it, plug it in directly.

Note: 1 Turn off the power first, turn off the power.

The computer is a dead thing.,It limits the direction.,Location.。。 In other words, you can only plug in the right direction and position.

Pay attention to compatibility.

First of all, it depends on how many memory slots your motherboard has, if there are any, plug them in directly, and then turn on the computer. However, it also depends on what type of memory your motherboard supports at most, whether it is DDR or DDR2 (I think your motherboard should not be very old), if it exceeds the motherboard's support, the memory will be used at a reduced frequency, for example, the motherboard only supports DDR2

And if you buy a 667 one, it can only work at the 533 frequency. It's also important to consider that the two memories may also be incompatible.

You don't need to set it up, just use it. Luckily, yours are of the same brand and are all DDR400.

But you can't form a dual channel, if you want to form a dual channel, remember to see if your board supports dual-channel technology, otherwise it will be in vain.

You don't need anything, just plug it in, and generally upgrade it without two of the same, but the same product doesn't have any conflict, you're so lucky.

Take a look at whether the motherboard is dual-channel, that is, two pairs of slots of different colors, if not, just find an empty slot and plug it in, if so, choose a different color installation.

Just plug it in, but you can't form a dual channel, it's a pity.

The memory slot is generally next to the CPU, and it is generally black brown or blue and black. Mostly black.

Place the case flat on the ground, and put the golden notched side of the memory on the slot on the protrusion, do not plug it in backwards, otherwise it will burn. Press it down hard, and you can see that the white plastic mounts of the card memory on both sides are stuck in the memory. If it's not too old a motherboard, pressing the memory will hear it"card"A bang.

After installation, try whether it will shake, if it shakes, it is not firmly inserted. Both memories are interpolated in the same way. Just plug it into two adjacent slots.

Once that's done, it's OK. Don't rush to put on the lid just yet. Connect the power supply and monitor cable first, and see if it can be turned on normally.

Once it's installed, it's all right. There is no need to install any more software.

It doesn't need to be set up, but it can't be set up with dual channels

This is not good, the performance will be reduced a lot if the size is different, and the memory of the same model and brand and size should be used.

Dual-channel memoryHere's how to install it:

Tools Raw materials: ASUS A456U, Xingxing Windows10 Home Edition, Spring Belt Digging Motherboard.

1. The motherboard needs to support dual channels, and now the motherboards all support dual channels.

2. The method of building dual-channel memory is also very simple. We only need to insert the memory numbered "1 and 3 memory slots" or "2 and 4 memory slots" to complete the construction of dual-channel memory.

Root memory, inserted into slot 2, single-channel memory. Pick up the core.

4. Another memory is inserted into slot 4 to form a dual-channel memory.

1. Press down the memory a little harder, and insert the memory into the memory slot completely to complete the installation. It is recommended that you look at whether the gold finger part of the memory module of the electric core Li brain is inserted into the memory slot, and if you can't see the gold finger part of the memory, it means that it has been installed successfully. Similarly, plug in a second memory module in another memory slot.

2. Therefore, when installing memory, it is necessary to insert memory symmetrically, for example, the first slot of channel A is matched with the first slot of channel B, or the second slot of channel A is matched with the second slot of channel B, of course, 4 memories can also be inserted at the same time to achieve dual channels.

3. X0D X0A In order to facilitate user installation, most dual-channel motherboards currently mark the symmetrical memory slots with different colors, and users only need to install the memory on the DIMM slots of the same color.

4. The recommended method is to get close to two 4G slots each of the CPU blue slot and black slot, and two 2G slots each away from the CPU blue slot and black slot to form a 6Gx2 dual channel. Bottom: Similarly, two memory sticks inserted into two blue memory slots can form a dual channel, with more than two larger memory sticks inserted into memory stick slots near the CPU.

5. As shown in the figure below: if you want to build a dual-channel, the memory needs to be inserted into the memory slot of the same color, for example, two memories of the same type of memory need to be plugged into DIMM1 and DIMM3 or DIMM2 and DIMM4 respectively to be successfully formed, and they are also distinguished by color on the real motherboard.

6. Prepare 2 pieces of memory and install them into the memory slots of the motherboard, provide 4 memory slots, and install dual-channel memory directly on the small motherboard. In the case of a large motherboard, there are 4 memory slots, and you only need to select two of them to install a dual-channel memory module.

The correct interpolation diagram for a dual-channel memory module is as follows:

Tools: GIGABYTE B450M DS3H V2, HyperX Fury CL16.

1. Find the memory slot of the motherboard and open the clip of the memory slot outward. At present, most of the pure memory slots of the motherboard are unilateral buckles, and the other buckle is fixed, we only need to open one side of the buckle, of course, if the memory slot of the motherboard is buckled on both sides, you need to open the buckles at both ends of the hunger trace.

2. Take out the computer memory module, observe the foolproof notch of the memory gold finger, and insert it corresponding to the "raised horizontal bar" in the memory slot on the motherboard.

3. Press down the memory a little harder, and insert the memory completely into the memory slot to complete the installation.

4. It is recommended that you look at whether the gold finger part of the computer memory is inserted into the memory slot, and if you can't see the gold finger part of the memory, it means that it has been installed successfully. Similarly, plug in a second memory module in another memory slot.

Benefits of dual-channel memory

This can bring twice the memory bandwidth, which can greatly benefit software that must frequently exchange memory data, such as Spec ViewPerf, 3DMAX, IBM Data Explorer, Lightscape, etc.

When the onboard graphics card shares memory, the high memory bandwidth brought by dual-channel technology can help the graphics card get a smoother speed in games, taking 3DMark2001SE as an example, the gap in its score can be widened to 15-40%.

There are a total of 4 memory module sockets, and if you look closely, their colors are different, for example, red, black, red, black. Okay, you plug both RAMs into slots of the same color and you're good to go.

Summary. Dual systems can only be win10 and win11

Hello, it depends on your processor, do you know what processor it is?

Rescuer R9000X, no problem.

Game laptop configuration,Dual system can only be win10 and win11win1win10 and ubuntu OK。

Yes, you can.

Windows system can only be 10 and 11ok thank you.

You're welcome,