This iPhone has been activated and you can now disconnect your iPhone

It's been activated, it's ready to use, and it's OK to see if other software can be used normally, such as itools or something, and if you can, it's a problem with iTunes.

This is because the phone has entered the wrong password many times, resulting in "iPhone has been disabled".

Solution: Re-flash the machine, the operation steps are as follows:

1. Shut down. 2. Press and hold the power button and the home button at the same time.

3. When you see the white Apple logo, release the power button and continue to hold the home button.

4. Open iTunes, wait for it to prompt recovery mode, then press and hold the shift key on the keyboard, click "Restore", and select the corresponding firmware to recover.

The phone has entered the wrong password many times, resulting in "iPhone is disabled". To get your iPhone back to use, we mainly erase iPhone data by flashing iTunes and logging in iCloud.

iPhone is disabled solution method 1:

1. First of all, we open iTunes and connect the iPhone to the computer with a data cable, and we need to operate with the computer.

2. Connect to the computer, and the computer will automatically recognize your iPhone (provided that you have installed the iTunes software) and enter.

iTunes will see the interface as shown above, at this time, click "Backup" to start backing up your phone data.

4. Wait for the iPhone to be flashed completely, and after the flashing is successful, start to restore the original phone data, at this time we "restore backup" in iTunes.

5. Since then, we have reborn the iPhone.

iPhone is deactivated, solution two: Log in to your iCloud and use iCloud to unlock it.

1. We turn on the computer and log in to iCloud on the computer. (。

2. Click "Find My iPhone".

3. In this way, iCloud will locate your device through the network. Then select "Erase iPhone" in the positioning options, naturally your iPhone is disabled Yoga status is also cleared, and then follow the system instructions to do it.

Note: The premise of this method is that you have logged in to your iCloud and turned on the "Find My iPhone" option in iCloud, and the Internet is required during the process, and the clear data cannot be recovered.

iPhone is disabled solution method three:Use this method when iPhone shows that iTunes must be connected to unlock.

If the iPhone iPad has shown "Need to connect to iTunes to unlock", you must go through iTunes, and this process cannot back up the data.

1. Turn off your phone and turn off your iPhone normally.

2. Connect your iPhone to the computer with a data cable and connect it with iTunes.

3. Press and hold the "Home button" of your iPhone until the device displays the prompt "Connect iTunes", and then release it (after iOS 8 system, the iTunes logo will turn red, before iOS system was blue).

4. The following can be operated according to the introduced method, which is basically the same.

Note: After flashing and unlocking, the activation process needs to insert a SIM card, and the full name needs to be connected to the wifi network, if you have an iCloud account before, you also need to log in your Apple ID and password to complete the activation process.

iPhone activation can only be completed when the phone has a SIM card, please disconnect and insert the SLM card in the iPhone, which means inserting the SIM card in the phone and then reconnecting iTunes on the computer to activate the phone.

The specific activation method is to insert the SIM card, press and hold the power button on the top of the machine, and after about 20 seconds of powering on, the iPhone will enter the activation interface.

Finally, in the name column, you can change the name of your iPhone. After the modification is completed, click Done to activate the phone.

Is your phone locked by someone else? Send a picture to see.

iPhone is not easy to use after update, and "There is no SIM card in the iPhone you are trying to activate" appears. Please disconnect and insert the card in your iPhone. Generally, the phone needs to be reactivated due to the incompatibility problem of the update system, you can try to reactivate the phone in the following ways:

1. Turn on the machine without inserting the card, and wait for the machine to enter the state to be activated.

2. Press the home button to bring up the emergency call interface, enter 112, and click to call.

3. Put the thumbs of both hands at the end of the screen at the end of the end of the call button on standby, and when the mobile phone is connected to 112 and there is a voice prompt, the right thumb clicks on the right side of the end call button, and then the left thumb quickly follows the left side of the end call button, and then the right hand continues to click, the left hand continues to click, and the two hands click alternately, the screen will appear: a, call - end - call - end - call failed - wait for more than 3 seconds, click cancel --- enter the desktop.

b, call-end-call-end--black screen but the call is through--wait for more than 3 seconds, click the home button--exit black screen--call hold-enter the desktop.

c, call-end-call-end--black screen but the call is on--wait for more than 3 seconds, click the home button is invalid--press and hold the power button--pop up the shutdown button--click cancel-exit the black screen--call hold-enter the desktop.

You plug in the SIM card to activate it...Plug in the card and connect it to the computer. Then open iTunes... iTunes is automatically activated online.

I dizzy to take to the United States to activate.

Upgraded to 7, turn on anti-theft, you have to crack it to activate, 318161552

Either it was stolen, or it was picked up, or the second-hand on the side of the road was pitted by someone else, anyway, there is no way, unless you have the original password.

Dude,This is to open the Find My iPhone,If you can find the trace of the connection ant ID and password, then you can use it,If you can't find Xunna, it's a brick,Good luck ......

You'd better return it to the owner, and beware of the police coming to your door.

This is a necessary step for the activation of a new phone.

For this step to appear on your activated phone, you must first erase the phone. Do this and everything in your phone will disappear, be careful.

Open Find My iPhone and then erase this device and it becomes like this, anti-theft, ios6 just flash off the phone.

My phone is like this, can you help?

Hello: I want to ask you, my mobile phone warranty box, and then that warranty certificate was thrown away by my mom and mom, and now it can't be used.

You don't need to set it up.,This requires you to have an ID and password to activate.,If not,,It's only cracked.。。。

In this case, there is a prompt for the characters at the beginning of the mailbox, make sure it is your own mailbox, you can reset the password, retrieve your ID and password, and then fill in it to activate.

If it is not your email address, and there is an original invoice, you can take the original invoice and ask Apple after-sales to cancel.

It's not your mailbox, and there is no invoice, you can go to a treasure to solve it, hundreds of dollars, and the probability of unlocking it is six or seven percent.