What s going on with two batteries shutting down at the same time

Is the voltage unstable, ** the power is cut off, so the host automatically shuts down. Unstable power causes the computer to shut down automatically. Maybe the computer BIOS is under protection, and it won't turn on for a while, so it will take a while.

It is recommended that you upgrade the firmware.

1. You can go to Taipower's official **(

2. Open the upgrade tutorial, there will be a detailed process, please follow the upgrade tutorial prompts.

3. If you still don't understand, it is recommended to call Taipower technical support**020-38731788.

It is recommended to flash the firmware first.

If not, it is recommended to find Taipower's after-sales service.

After-sales inquiry. Taipower's official website, channel service - national joint warranty column, Annex 2: maintenance service outlets can be checked.

Taipower has its own service center and after-sales service across the country, and the service reputation is still good.

I guess you're wrong, and you want to shut down and press to restart, right?

Hardware fault, not a firmware problem, can only be repaired.

Is the leakage great, there is generally a natural loss, because discharge is a chemical process, this process will definitely happen, but the reaction is more violent when you use it, and it is milder when you don't use it. So if it doesn't leak very badly, it's normal, and if it leaks very badly, then the quality is not up to par. You can look for after-sales service.

I don't know what model yours is, mine is also this problem, depressed to death! I used the TL-C430+ for three or four hours after charging, but if I put it overnight, it leaked all ......

After searching the Internet, many people have this problem, speechless, it is said that they can only return to the factory.

Normally, even the schedule has to consume electricity.

1 All this is the tablet memory excess, too much junk performance, uninstall unwanted software, clean up the traces of the Internet.

That's the problem of the firmware itself, the most good upgrade to the latest version, there will be no problem, after upgrading the new firmware, you can set bookmarks in the three articles of change, never lose and the new firmware supports FLV format**. There are Microsoft sound effects. You can go to the nuclear cover and brush it, and the official network has it.

If you have any questions, you can ask me, I brushed. Much easier to use than before.

It's very suspenseful, the router settings are restored to the factory settings first, and then reconfigured The dhcp function should be turned on If it's still like this, first look at the network card configuration of the desktop, and the laptop network card settings are also set like that, and then see if the laptop can access the Internet after the desktop is turned off, mainly check the settings of the computer, and I personally feel that the configuration of the router is not a big problem.

After desktop shutdown. Is the power socket also turned off?

Generally, if you dial up independently through the router, the desktop is turned off, and the laptop will definitely be able to access the Internet.

Unless the power to your router, or the power to the mode, is also turned off.

Check for yourself to see if there is a problem with the power supply.

Are you connected to the router and still can't get online? Is the laptop wireless or wired? Enter the router to change the on-demand connection to always connect.

You're a broadband cat, right, and the router only needs to be set up in the route** and doesn't need to dial up.