How to overclock the Sempron 3000, how to overclock the AMD Sempron 3000

The maximum straightness that can exceed 2g is 25%.

There are a few BIOS that can't be overclocked.,MSI's I checked the BIOS should be there.,If not, you can overclock it in other ways.。 However, they are all very dangerous, if you are really an enthusiast, add voltage and overclock. But it's complicated.

Besides, overclocking is risky, but it's okay to be a little super, mine is Athlon 3000+, the main frequency is overclocked, hehe, but for stability and security, it's set to it.

If you have any questions, just ask me directly

Yes, to increase the voltage and overclock can be re-inside the BIOS, method:

How to adjust the CPU voltage of the GIGABYTE GA880G UD3H:

Go to BIOS, select MB Intelligent Tweaker (, then select System Voltage Control, and set it to Manual, then select CPU Voltage Control, and press the up and down arrows to increase or decrease the CPU voltage.

At the same time, you can also increase the frequency on the BIOS page, be careful not to change too much, otherwise it will be extremely unstable, such as crashing, blurred screen, unable to turn on, etc., and may burn out the CPU. Attention.

Another way is to use the Easy Tune that comes with the disc that comes with the motherboard, install this, press Easy Boost, and you can easily overclock it after running.

The question you ask is too general, you don't know what motherboard you are, overclocking is closely related to the motherboard, and the BIOS of each motherboard is different. In addition, if you want to improve the performance of the machine, you still forget that the Sempempsaurus 3000 has been outdated for many years, and you can't match the 300 fast Celeron dual-core E3200, or AMD's Athlon 240. Changing platforms is king.

If you want to learn overclocking knowledge, it's best to go to a larger forum to learn from scratch, overclocking is not very simple, to solve the heat dissipation, to limit overclocking and add CPU voltage. If you don't understand it, it's easy to get hurt.

No need to overclock, no matter how much overclocking will not change ......qualitatively

The main thing is to adjust the external frequency 200, which can be appropriately added, and can be slowly overtaken upwards to see how much it can be exceeded, and the voltage can be increased appropriately.

Adjust the fan speed to the maximum Reduce the memory frequency, because CPU overclocking will drive memory overclocking, sometimes unstable, it may also be caused by memory, generally the external frequency, you can slowly increase it from 200 to 260, if you can't turn it on, jump the wire to restore CMOS

1. Press after turning on or restarting".del"(Enter the keypad area to the left, or the arrow keys are on the key.)"delete", which is to press, not hold);

2. Enter the full name of the blue screen and white characters, hehe, you should understand);

3. Find the one on the right side (usually the column on the right)."frequency/voltage control", click"enter"Enter;

4. General overclocking, small overclocking, only need to change"cpu frequency"In the case of 200MHz (depending on the actual situation, there are also 133MHz, etc.) and the default frequency doubling is set. If you want a clock speed of 3200MHz and the frequency of the octaper is 15, then use the frequency of the main frequency octave = 213 and change it to 213MHz (manual input). If you don't feel at ease, you can 215 220....

Try them one by one. If it is a small super, go directly to Article 7;

5. If you need to overclock significantly, such as the default frequency of 3000MHz, the frequency of doubling 15, and you want to exceed 3800MHz, so calculated, the external frequency should be 253MHz, but when you modify it, you find that you can't boot it or the default value in the BIOS after booting, at this time, you need to add CPU voltage (CPU voltage), which is to give it more energy to make it run farther (start from a small one, and the heat production will start to increase relatively greatly if you add voltage, try to come);

6. If you add the CPU voltage and find that it still doesn't work, you need to reduce the frequency of the memory (the reason is below, Annex 3), in BIOS, select the Advanced Chipset Features on the left - MemClock Value, and there will be three options for the memory clockAuto Limit Manual, we choose"manual", and then reduce the frequency according to the actual situation, and then increase the frequency of the CPU, if it still doesn't work, you may need to pressurize the memory, that is, the DIMM chip voltage option. (When overclocking, if it is an AMD CPU, it is recommended to temporarily turn off AMD K8 Q&C);

7. After you are ready, don't forget to increase the fan speed, in BIOS-PC Health Status-Cpufan Mode Setting, select Manual Mode, change to 255 (0-255 level, the larger the speed);

8. Press F10, select Yes OK, auto-restart, auto-adjust and enter the system after stabilization, otherwise enter the BIOS, and the boot may fail in severe cases.

HIT bus first changed to x4 memory first downclocking you just watch the jump on the external frequency, the default is 200, try to add it a little bit. I guess you're a newbie, take a look at this first.

The Sempron 3000+ has a default frequency only, and it is indeed a very good overclocking processor.

However, your motherboard is an integrated graphics card and 1G single memory, which has a great impact on overclocking, it is recommended to lock the PCI bus to directly add the voltage, and then set the external frequency between 233-266, and the frequency doubling does not need to change.

The specific steps also depend on your motherboard's U can be over 2G

Enter the motherboard and directly adjust the external frequency to 250

Press F10 to save and exit.

I'm overclocking in the motherboard BIOS Change the external frequency I remember that your CPU external frequency is 200MHz You increase the external frequency of 10MHz The CPU frequency increases the main frequency My CPU external frequency has increased from 200 to 270 The main frequency has changed from Hehe It's already the limit But the performance improvement effect is not obvious I take into account the stability of the computer or have changed it back You can try to exceed it little by little Don't exceed too much at once But I still recommend that you don't overclock The first overclocking has high requirements for the motherboard Onda's motherboard, I estimate that it is difficult to exceed so much, and it is unstable to run, prone to automatic restart, blue screen phenomenon, even if it is super successful, the effect is not obvious, and it reduces the life of the CPU.

To put it mildly, this CPU is still garbage even if it is overclocked. It is recommended to buy an Athlon CPU in the 2-hand market, which is much easier than overclocking. It is estimated that it is about 100-200 yuan.

Overclock with software.

AMD Overdrive, the AMD overclocking software.

I've used amd3000+ and it doesn't seem to be able to overclock.

Tune in the outer frequency and take a look.

It is said that overclocking will burn the CPU, which depends on luck, but as long as you don't mess with the CPU voltage, you won't burn U.

AM2's technology is still not very stable,It is recommended not to overshoot,A little more is enough,Generally speaking, the speed of Semp Dragon3000+ has basically reached the speed of mainstream games now,As long as the video memory is adapted,Super is still in the normal range。 If the ambition is big enough, it is recommended to change to a more powerful fan, paste some heat sinks, and integrate the power supply.