What is the reason why the mileage is not displayed, the mileage is not displayed on the dashboard?

Updated on Car 2024-02-25
16 answers
  1. Anonymous users2024-02-06

    If the mileage is not displayed, it is possible that the instrument cluster itself is damaged and the instrument needs to be replaced.

    There are two ways to display the kilometers of the vehicle dashboard, the first is a mechanical display, and the second is a liquid crystal display.

    1. If the instrument panel displayed in a mechanical way is not displayed in kilometers, it is basically that the instrument panel itself is damaged and the instrument needs to be replaced.

    Second, the LCD dashboard does not display the number of kilometers, first of all, you need to confirm whether the vehicle key door is open, the key door is not opened, and the kilometers are not displayed. After opening the key door, check whether the mileage is displayed normally, if not, restart the dashboard to reset the instrument, and check whether the kilometers can be displayed normally after resetting. If it still does not appear, you need to power off the vehicle, but if it still doesn't work after the power is off, try to program the dashboard.

    After programming, it still doesn't work, that is, there is a problem with the meter and the meter needs to be replaced.

    If the dashboard itself is fine, it could be one of the following:

    1.Wheel speed sensor Failure of vehicle speed sensor (at present, models with ABS ESP, speedometer and odometer are based on the signal of the wheel speed sensor, and the model without it is in the transmission.)

    There is a vehicle speed sensor on the output shaft), and the fault can be used with a decoder.

    Read the data stream and lift the vehicle up.

    2.Problems with signal transmission, open or short circuits in the line (can be used with a multimeter.

    the condition of the measurement line);

    3.Failure of the control unit.

    Extended information: mileage is also called kilometers, refers to the mileage of the vehicle, the vehicle's odometer is divided into two, the first is the total odometer, the second is the subtotal odometer, the total odometer is not adjustable, the small odometer will be automatically eliminated after 1000 kilometers, and the number of kilometers will be calculated again. The mileage of the car can be seen on the odometer, usually expressed by odo, and the value is followed by the unit km, which indicates the current total mileage of the car, which can let the driver know the distance traveled, and can be converted into fuel money, and the side shows whether the car is fuel-efficient.

    Vehicle mileage can not be modified, vehicle mileage is related to the specific number of kilometers traveled by the vehicle, is a reference data for vehicle maintenance, and is also a reference data for second-hand cars. Modifications are not permitted. The vehicle mileage is displayed on the dashboard in a fixed mode, and the subtotal mileage can be displayed by adjustment, and the kilometers of the small odometer can also be cleaned at any time.

  2. Anonymous users2024-02-05

    The meter does not show the mileage, possible causes of failure:

    1. Wheel speed sensor The fault of the vehicle speed sensor (at present, the model with ABS ESP, the speedometer and odometer are all taken from the signal of the wheel speed sensor as the reference signal, and the model without it is a vehicle speed sensor on the output shaft of the transmission), the fault can be read by the decoder to read the data stream, lift the vehicle up, and turn the wheels. See if there is a wheel signal;

    2. Problems with signal transmission, open or short circuit of the line (the situation of the line can be measured with a multimeter);

  3. Anonymous users2024-02-04

    There are many reasons why the car does not display the mileage, usually the reason is that the sensor or line of the car odometer is faulty, it is recommended to go to the auto repair shop or 4S shop to check the maintenance.

  4. Anonymous users2024-02-03

    The number of kilometers is not displayed on the dashboard, generally speaking, the car odometer sensor or line problems may be caused, it is recommended to go to the car after-sales service or regular auto repair shop to overhaul to see if the car has this problem.

  5. Anonymous users2024-02-02

    Unplug the ABS computer plug, the car's odometer data ** to the vehicle's wheel speed sensor, the wheel speed sensor will input the signal into the ABS computer, and then pass to the vehicle odometer through the data cable, the car manufacturer will unplug the ABS computer plug when transporting the vehicle, to avoid the vehicle in the transportation to increase the course, the specific operation steps are as follows:

    1. Open the door on this side of the cab.

    2. Pull the hood switch on the left side of the driver's leg.

    3. Lift the hood of the engine upwards.

    Fourth, use the support rod to support the hood to ensure that the support is firm and avoid danger.

    5. Unplug the ABS computer.

  6. Anonymous users2024-02-01

    Teach you how to adjust the car odometer, and you won't come in to learn it, and increase your knowledge.

  7. Anonymous users2024-01-31

    The speedometer itself is stuck, or it may be a problem with the speed probe, which has fallen or is broken.

  8. Anonymous users2024-01-30

    First of all, look at the principle of the kilometer meter, if it is a sensor type, check the pulse sensor, if it is a flexible shaft type, check the odometer gears, all on the gearbox.

    One reason is the problem of the sensor, the second is the problem of the line, and the third is the problem of the instrument.

  9. Anonymous users2024-01-29

    If this situation occurs when the car is warmed, and the temperature is also displayed randomly, and the car can start, it may generally be that the instrument needs to check the fault.

  10. Anonymous users2024-01-28

    If you change the sensor, it's not good, that's the problem of the odometer.

  11. Anonymous users2024-01-27

    Please check the line and check the odometer at check.

  12. Anonymous users2024-01-26

    Hello, in this case, focus on checking the connection of the line and whether the fuel sensor can be used normally; If you should be able to display the mileage of the cruising system, you can press and hold the dashboard button to switch and display the information;

    You can open it for a while to take a look, it may be that his number or something has not been completely refreshed;

    It is also possible that there is a problem with the sensor or the contact is not good, you can turn off the engine and restart it.

    It should be caused by the setting problem or the interface has not been adjusted, go to the 4S store and ask the master to set it up, or look at the instruction manual to set it up again; You can also adjust the knob on the dashboard, or look at the manual, as the settings will be different for each model. Hope it helps.

  13. Anonymous users2024-01-25

    In this case, focus on checking the connection of the line and whether the fuel level sensor can be used normally; If you should be able to display the mileage of the cruising system, you can press and hold the dashboard button to switch and display the information;

    You can open it for a while to take a look, it may be his number or something, it has not been completely refreshed, and it may be that there is a problem with the sensor or the contact is not good, you can turn off the engine and restart it to try; It should be caused by a setting problem or not adjusting the interface.

    Go to the 4S shop and ask the master to set it up, or look at the instruction manual to set it up again. You can also adjust the knob on the dashboard, or look at the manual, as the settings will be different for each model.

    The above content reference: Odometer - Encyclopedia.

  14. Anonymous users2024-01-24

    To turn cruise control to off, you can press the hand-like button on the cruise control control.

  15. Anonymous users2024-01-23

    1. The car odometer is not accurate to estimate that it is a problem with the odometer sensor, an internal fault of the sensor, or the sensor is away from the gearbox.

    The inner induction coil (gear ring) is too far away, which may also lead to inaccurate odometers, or the driving computer needs to be adjusted, each car is different, it is recommended to contact the 4S shop to take the difference.

    Examine. 2. The mileage performance is different in the car, it overcomes"Remember the drum car"The shortcomings can not only tell you how many kilometers you have traveled this time, but also remember how many kilometers you have traveled since leaving the factory, so whether the vehicle needs to be overhauled, whether the engine proportion relationship should be scrapped, all have records to follow.

    3. The principle of knowing the situation is very simple, because the Zhiqing Min Diameter of the car wheel is known, and the circumference of the wheel is known.

    It's constant. This makes it possible to calculate how many turns the wheel will take for each mile traveled, and this number is also constant. Therefore, as long as the number of revolutions of the wheels can be automatically accumulated, and then divided by the corresponding number of revolutions for each mile, the mileage can be obtained.

    When the indication reading of the vehicle speed odometer is inaccurate, and there is an obvious error in the mileage, it may also be due to the loosening of the flange lock nut, which makes the original compressed odometer flexible shaft driving gear loose and slip. Dynamic 1090E car odometer flexible shaft driving gear by hand brake drum flange lock nut fixed, with the transmission.

    The second shaft is connected as one, and the nut locks itself by the deformation of the four butterfly washers pressed against it.

    4. The wear of instrument parts is too limited, and the magnetic force of the magnet is degraded, which will cause inaccurate data indication.

    5. When the odometer transmission driving gear is loose, and the driving gear is not compressed and slipped, so that the mileage reading is obviously less than the actual value, the transmission shaft should be checked.

    Flange lock nut is screwed to the specified torque i% to 245N"m。During each maintenance, the fastening of the flange lock nut should be checked, and the connector of the flexible shaft of the odometer should be removed, the shaft should be removed from the car, or the square head of the mandrel should be clamped to extract the soft mandrel, cleaned with oil and then greased and then reassembled.

  16. Anonymous users2024-01-22

    Summary. Hello, the vehicle meter mileage is not displayed related to the reasons and how to deal with it as follows.

    First, the phenomenon caused by the plug behind the vehicle instrument is falsely connected, and the relevant plug line needs to be checked first.

    Second, this phenomenon caused by the problem of the vehicle's odometer position sensor needs to be checked for the odometer position sensor.

    Third, the phenomenon caused by the problem of the instrument program can be temporarily treated, you can remove the negative pole of the battery wire, wait for 5 to 10 minutes and then install it to try.

    Fourth, if the power outage cannot solve the problem, this situation needs to overhaul the instrument or replace it with a new one.

    The mileage on the car is not obvious, what's going on.

    Hello, don't click to end, I'm textual to give you the full answer, 2-3 minutes.

    Hello, the vehicle meter mileage is not displayed related to the reasons and how to deal with it as follows. First, the phenomenon caused by the plug behind the vehicle instrument is falsely connected, and the relevant plug line needs to be checked first. Second, this phenomenon caused by the problem of the vehicle's odometer position sensor needs to be checked for the odometer position sensor.

    Third, the phenomenon caused by the problem of the instrument program can be temporarily treated, you can remove the negative pole of the battery wire, wait for 5 to 10 minutes and then install it to try. Fourth, if the power outage cannot solve the problem, this situation needs to overhaul the instrument or replace it with a new one.

    Disconnect the battery wire, try the negative electrode, if not, the probability of problems with the instrument is relatively large.

    A few minutes. What do you mean?

    Power. How many minutes will it take to recover after a power outage? In this case, there is a problem with the relevant circuit board in a table.

    Is it okay to break the positive electrode.

    The negative electrode cannot be removed.

    Hello, it is also possible to disassemble the positive electrode, no problem.

    Most of them are due to the above reasons, and it is enough to do a targeted exclusion.

    Hello, happy family, I hope mine can help you Happy driving, happy Year of the Tiger, please give a thumbs up after the conversation! Your likes are very important to me, thank you very much! 

    If I can help you, please give me a thumbs up Thank you!

Related questions
15 answers2024-02-25

There are too many phone data caches.

Occupies memory, causing a message to be low in memory. >>>More

12 answers2024-02-25

There are many causes of low back pain in the first place. >>>More

7 answers2024-02-25

The reasons why the LCD (Liquid Crystal Display) screen flickers and shakes are: >>>More

4 answers2024-02-25

Cramping is a sudden, involuntary tonic contraction of muscles, which causes muscle stiffness and pain. Leg cramps are the most common experience for the average person. Seven percent of adolescents have had foot cramps in the past year, with the 16 to 18 age group being the most likely to occur. >>>More

3 answers2024-02-25

Bleeding gums is a local disease, but also the manifestation of the first disease of the whole body, pay attention to check to see if there is oral inflammation, plaque, gingivitis, but also to be alert to systemic diseases such as leukemia, after exposure to radiation, autoimmune diseases, etc., opinions and suggestions: **need to actively look for the primary disease to carry out**, in addition to eating more fruits and vegetables, if it is a lack of vitamin C, in addition to taking vitamin C tablets under the guidance of a doctor, the diet should also pay more attention to supplementing vitamin C-rich foods, If you find that your gums are bleeding when brushing your teeth, you should first check whether the bristles of your toothbrush are too hard, and replace the health care toothbrush with soft bristles.