The laptop can t connect to the Internet, but the network display is normal

Updated on number 2024-02-09
9 answers
  1. Anonymous users2024-02-06

    There are many reasons for this!

    1.It could be poisoned!

    2.It may be in arrears,!

    3.Either that's a setup issue!

    4.Check whether there is any problem with the hardware and software of the network card.

    No, is the IP setting correct?

    If you can't get on MSN, you should exclude DNS settings, you can see what IP address your wireless network card gets, you don't know the gateway address of the average router, so you don't specify the IP address, you can get it automatically. If that doesn't work, look to see if the wireless network name (SSID) you receive has a lock on the front and, if so, a network with a security key. Because you are using someone else's network, you don't know the gateway IP or the key, then you definitely can't access the Internet.

    Addendum: If the person is just a wireless router and is not connected to the Internet, then you must not be able to connect to the Internet, and when he is connected to the network, you will naturally be fine.

  2. Anonymous users2024-02-05

    See if you can ping the gateway. Other people's network, if he unplugs the WAN network cable, you can't do it.

  3. Anonymous users2024-02-04

    Reinstall the network card driver. Reset the cat.

  4. Anonymous users2024-02-03

    It may be blocked, some wireless routers can see the number of connections, if you don't want you to connect, it will be blocked, our dormitory is next to Siemens, and you can access the Internet in the past, but then it won't work!

  5. Anonymous users2024-02-02

    If the DNS is not set, is the IP set correct?

  6. Anonymous users2024-02-01

    If the laptop is connected to wifi but cannot access the Internet, such a problem occurs, Wutu may be caused by the following reasons.

    1. The IP address of the computer is set to the problem.

    2. The router setup is unsuccessful.

    3. Channel problems in the router.

    4. The number of wireless client connections is too large.

    5. Restrictions in the router.

    In most cases, it is the unsuccessful setting of the wireless router, which causes the computer to connect to the wifi and cannot access the Internet.

    Common home wireless routers actually have a wireless belt capacity, and the general wireless belt capacity is about 15. If there are too many mobile phones, laptops, and tablets connected to the router's Wi-Fi, there may be a problem that the Wi-Fi connection has been connected but the computer cannot access the Internet for a long time.

    So, you can log in to the router's settings screen to see how many wireless devices are connected to the router. Older wireless routers can be viewed under the "Wireless Settings" - Host Status" option. Older routers to see the number of wireless connections.

    Laptop Introduction:

    Laptops, also known as laptops, laptops, handhelds, or laptops, are characterized by their small size. It is more portable than a desktop computer, and it is a small, portable personal computer. Usually weighs 1-3 kg.

    The current trend is to be smaller and lighter, lighter and more functional.

    In order to reduce the size, laptops use liquid crystal displays (liquid crystal LCD screens). In addition to the keyboard, it is also equipped with a touchpad or pointing stick as a pointing device.

    The difference between a laptop and a desktop is portability, which has different requirements for the capacity of the motherboard, CPU, memory, graphics card, hard drive, etc.

  7. Anonymous users2024-01-31

    Summary. Hello, dear, the computer shows that there is a network but can not access the network for the following reasons: 1. Broadband arrears or expiration, need to pay or renew in time.

    2. If the network cable is loose, both ends of the network cable need to be plugged in tightly. 3. If the device is used for a long time, you can turn off the power of the optical modem, router, computer and other Internet access equipment for a few seconds, and then turn on the power supply and restart.

    The computer shows that there is a network but there is no way to access the Internet.

    Hello, dear, the computer shows that there is a network but can not access the network for the following reasons: 1. Broadband arrears or expiration, need to pay or renew in time. 2. If the network cable is loose, both ends of the network cable need to be plugged in tightly.

    3. If the device is used for a long time, you can turn off the power of the optical modem, router, computer and other Internet access equipment for a few seconds, and then turn on the power supply and restart.

    I'm able to open this nail, but the browser or anything is not connected.

    Hello, dear, the computer shows that there is a network but can not access the network for the following reasons: 1. Broadband arrears or expiration, need to pay or renew in time. 2. If the network cable is loose, both ends of the network cable need to be plugged in tightly.

    3. If the device is used for a long time, you can turn off the power of the optical modem, router, computer and other Internet access equipment for a few seconds, and then turn on the power supply and restart.

    Hello, dear, this is a problem with your network, you can follow the above methods, thank you.

    It didn't work. Hello, dear, if the above methods can not be recovered, it may be the internal damage of the computer, it is recommended that you go to a professional repair shop to check it.

  8. Anonymous users2024-01-30

    1. First click on "My Computer" and then select C drive.

    2. Find the "Windows" folder, click in to find the "System32" folder.

    3. Find the "cmd" file, and right-click "Run as administrator".

    4. Then type "netsh winsock reset", then press the enter key, and finally restart the computer.

  9. Anonymous users2024-01-29

    Hello, dear, I'm glad to answer for you: There may be the following reasons why the laptop has a network but can't get on the network:1

    Network connection problems: Check whether the laptop has been connected to the correct wireless network, if it has been connected, please check whether the network has been dropped or whether the friend is stable. You can test it on other devices to see if you have the same issue.

    2.Network settings: Check your laptop's network settings to see if there are any misuses or changes.

    For example, whether the firewall or the ** server is turned on, etc. 3.DNS Issues:

    If the network connection is normal, but you can't connect to the Internet, it may be caused by DNS problems. You can set up a DNS server manually, and generally you can use Google's public IP address to report a conflicting address: if multiple devices are connected to the same Wi-Fi, there may be IP address conflicts, resulting in a lack of access to the Internet.

    You can try to fix the problem by changing your laptop's IP address, or restart your router. If the above methods do not solve the problem, it is recommended to contact the network operator or computer repair technical support.

Related questions
3 answers2024-02-09

The reason for your problem:

1. It may be caused by the failure of the parts of the screen itself, such as fluorescent tubes, liquid crystal materials, thin mode transistors, etc., or the cable is caused by the connection line between the screen and the motherboard, but the cable may not be very large! >>>More

7 answers2024-02-09

Is it a wireless router? The wireless routing settings are incorrect.

8 answers2024-02-09

DHCP is a function of the router, which means that the IP address is assigned to the connected device, and if you keep showing that you get the P address, it may be that the DCHP function is turned off, and he doesn't assign you an IP address, so you keep getting it, and your computer keeps trying again, and the result is still not obtained, and if you know the network segment, you manually specify the IP

9 answers2024-02-09

There are many reasons why the boot screen does not respond, the common reason is that the memory is broken or the memory slot is soldered, and then there is a problem with the power supply chip of the motherboard, and the BGA (north and south bridge, graphics card, network card, etc.) packaging chip is damaged by virtual soldering, which will cause the boot screen to not light up. It is recommended that you send it for repair and testing. >>>More

9 answers2024-02-09

Hello, according to your existing equipment, I suggest the following most cost-effective and labor-saving methods, three steps! >>>More