Is there a tutorial for car wraps? I want to post it myself

Wrapping film is a technical job, and a car beauty shop asks a professional filmmaker to pay thousands of yuan a month. You can't learn just by watching tutorials without practice.

It is recommended to go to a professional car beauty shop to paste it, or buy a good film for the labor fee.

I haven't posted it impossible, I've been pasting it for 6 years, this is simple, you have to experience, it's better to find a store and spend 100-200 yuan to post it, if you don't touch the film, you can contact me.

It's best not to stick it yourself, the film is very demanding.

Let's practice mobile phone film first, car film is also a technical job, and it is quite difficult to paste it alone.

I believe that many car owners will make car film for their cars, after all, car film can still play a big role, but some car owners in order to save labor and cost, plan to do it themselves, so can the car film be pasted by themselves? It can be for sure, but it should be reminded that if the tools are not complete, or not completely sure, it is better to leave it to a professional master to deal with, otherwise it will be time-consuming and labor-intensive. Let's take a look at the car film tutorial:

1. The car film should choose a suitable working environment, and it is best to achieve dry, less dust or even no dust. This principle is the same as when we apply the film to the mobile phone, once the film is applied in a dusty environment, the entry of debris will affect the effect of the film.

2. Clean the vehicle in advance, and then do a good job of protecting the vehicle. Since we need to spray the glass with liquid during the lamination process, there is a high risk of causing unnecessary damage to the surrounding area. Therefore, it is necessary to protect the inside and outside of the vehicle, which can be covered with a protective cover, and if there is none, it can also be replaced with a towel and plastic wrap.

3. Clean each piece of window glass again, especially the top and edge of the glass, which are usually not easy to clean, and then wipe the water.

4. The purchased car film is a large roll, so it must be cut before it can be used. Spray a little water on the glass surface, then adsorb a certain thickness of plastic film on the car window, and draw a sample according to the edge, which is 3-5mm more than the glass.

5. The front and rear windshields have a certain curvature, and there is no way to use them if the car film is not baked and shaped. This step should be the most difficult in the whole film process, cover the cut car film on the outside of the glass, it is recommended to adjust the temperature of the heat gun to the maximum, the wind speed is also, and then quickly heat the arc part that needs to be shaped, and at the same time use a scraper to stick the car film tightly to the glass, pay attention to the heat gun can not stay in one position for a long time, otherwise it may blacken the car film, or even cause the glass to break due to high temperature.

6. After the car film is finalized, it will officially enter the film process. It is worth mentioning that many friends do not know whether the car film is attached to the outside or the inside of the glass, but it is actually attached to the inside of the glass. Spray the inside of the glass with clean water or window film installation fluid, then tear off the innermost layer of plastic film, attach the car film to the inner glass, and move it to the most suitable position.

7. Finally, the water rush link, spray some water or window film installation liquid on the surface of the car film, and then use the Yangtze River Delta plastic scraper to catch the water.

8. The film steps are basically completed at this point, but we still need to conduct a detailed inspection, including whether there are bubbles between the film and the glass, whether it is firmly pasted, whether there are wrinkles, whether there are scratches, etc. If there is no problem, use a towel to absorb the water from the edge of the glass.

It is worth noting that within a week after the film (7 days at the earliest, the longest is 15 days), the windows cannot be lifted, otherwise it is likely to cause the car film to shift, then the previous efforts will be wasted.

1.Car film can make the car look as shiny as new, which is one of the basic contents of car maintenance. So how do you stick your own car film? Let's take a look at the tutorial for car film. 2.Self-adhesive film tutorial.

3.Step 1: Preparation before car filming: clean and install interior protection.

4.In order to prevent the formation of microscopic impurities during the lamination, the entire body is generally cleaned during the lamination. Look at the window before applying the film:

6.Secondly, the film is cut according to the size of the window.

7.Film cushioning is an important process of car film; According to the evaluation of CAR2100, the cutting size of the car film is generally determined according to the specific size of the car window, and the size is slightly larger than the car window to cut.

8.Self-adhesive film tutorial.

9.Step 3: Clean the front and rear windows.

10.In addition to vehicle washing, it is also important to remind everyone that the window glass needs to be carefully cleaned again. When washing, the car is usually scraped repeatedly using two types of scrapers (hard scraper and soft scraper).

Now the car film will be operated in the dust-free workshop to prevent impurities from being generated in the car film and affecting the effect of the film

11.Step 4: Wrap, bake, wet film.

12.When the film is cut, the staff will spray soapy water on the window glass. In this way, in order to better paste the car film, after the adhesive layer of the car film is removed, it should be carefully pasted on the inside of the car window.

Under the lubrication of soapy water, the distance between the edge of the car film and the car window can be adjusted to ensure the overall appearance.

13.The movie has officially begun.

14.The intermediate baking film is mainly used to fix the automobile film and shape the automobile film by heating;

15.After the film is filmed, the staff will also check the effect of the movie, on the one hand, cutting corners; On the other hand, the staff will use the scraper mentioned above to scrape off the remaining blisters in the film and let the film completely adhere to the window glass. After that, wipe the removed water stains with a highly absorbent towel, and the finished car film and car film can create a perfect mirror effect.

17, 1.Explosion-proof. The base layer of the membrane is polyester film, which is very tear-resistant and anti-breakdown, which can prevent accidental glass breakage from causing secondary injury to drivers and passengers.

18, 2.Thermal and sun protection. The film can solve the large amount of heat generated by infrared rays, and the body temperature is greatly reduced, as well as the temperature in the car.

Reduce the energy consumption of air conditioners. The cooling loss of the heat shield air conditioner can be compensated, which can prevent the temperature in the car from being too high to a certain extent, and achieve the effect of saving fuel consumption and reducing the energy consumption of the air conditioner to a certain extent.

20, 4.UV protection. Medium and long wavelengths of UV light can penetrate thick glass, and a layer of heat insulation film can block 99% of UV rays.

Prevent damage and reduce the aging of car interiors. For example, the front screen of 3M Jingrui 70 can block ultraviolet rays, which is 56 times that of SPF40.

21, 5.Anti-glare. Keep your eyes comfortable. Reduce accidents caused by the glare factor.

22, 6.Create a private space. After the film, you can't see the inside of the car clearly, but it does not affect the scenery in the car (Reference|.)**)。This way, you can effectively protect your privacy and security.

23, 7.Improve aesthetics. According to personal preference, the car can be personalized by wrapping it.

Clean each piece of glass well, spray a small amount of window film installation liquid on the outer surface of the glass, cover the window film on it, and cut the window film along the border.

After the thermal shaping is completed, the inner surface of the glass is cleaned with a strong liquid cleaning agent, and the oil is scrubbed with a nylon soft wipe sheet.

Remove the protective film and spray the installation solution on the adhesive surface of the window film and the inner surface of the glass, and apply the window film to the glass.

Please click Enter a description.

After the sliding positioning, the installation fluid should be sprayed again, and the installation fluid can be discharged with a special water squeezing tool.

Car film tutorial, this can be collected, click on the Internet to search for car film tutorial, he has** uh, the tutorial effect is still quite good, you can take a look at some specific operations and well, practice how to apply the film.

Learning auto repair? Lanxiang Automobile Repair College. After all, it was Mr. Tang Guoqiang's endorsement, and he was too impressed. Learning auto repair? Lanxiang Automobile Repair College. After all, it was Mr. Tang Guoqiang's endorsement, and he was too impressed.

It is best to go to a regular 4S store for professional pasting, or you can apply it manually, but you need a better technique to do it. Here are a few steps and **:

1. Clean each piece of glass completely and thoroughly, mainly taking care of the top of the glass.

2. Spray a small amount of window film installation liquid on the outer surface of the window glass, cover the soft mold on it, and then cut it after careful sliding positioning. During the shearing operation, the car film is firmly attached to the glass. After that, the window film is cut according to the mold.

3. Apply the window film installation liquid to the glass, and then apply the film.

4. Since almost all the window glass is not flat, the window film can be accurately shrunk and shaped by using a baking gun. Eliminates wrinkles on surfaces.

5. The next step is the internal film, and now the window film installation liquid is sprayed evenly. After that, the film is applied.

6. After each piece of window film is settled in its final position, the installation liquid should be sprayed again on the surface of the window film to lubricate the surface of the squeezed water. After that, use the Yangtze River Delta plastic scraper to catch the water.

7. Finally, use a cotton cloth to suck out the water squeezed out of the edge of the window, and it is done.

Clean the body and keep it dry. 2. Determine the location that needs to be pasted. Under normal circumstances, slowly apply while scraping flat with a tool and removing the bottom paper.

3. If the graphics are really not big, you can also tear off all the transparent transfer film and stickers before pasting. But care must be taken not to accidentally adhesion.

4. After pasting, scrape and press several times. Remove the transparent transfer membrane.

5. Draw a knife with a utility knife on the door and sewing the car, and wrap it inward. Rowing Sparrows.

Main advantages: The automotive film is a vacuum thermal evaporation film, which adopts a vacuum thermal evaporation process, which evaporates the aluminum layer on the substrate to achieve the thermal insulation effect. This is also commonly referred to as the field of mammoto metal film, which has a relatively long-lasting thermal insulation, but the weakness is that the clarity is not high, which affects the comfort of the field of vision, and another prominent weakness is the high reflection.