Network marketing in the car film industry, car film technology

Deciphering the Essence of Internet Marketing When it comes to online marketing, it is estimated that 90% of people are intimidated by its professionalism and think it is unfathomable. Many business owners spend a lot of money to raise so-called network marketing experts, do not do personnel every day, do some things to fool the boss, there is a kind of posture that does not fool the boss and does not stop! When I say this, I guess many people will scold me because I pierced this layer of paper and cut off other people's financial routes!

But I still want to say that today I want to unveil those things about network marketing for you: first of all, network marketing is inseparable from the platform, and without the platform, it is like a tree leaving the soil and a fish leaving the water; There are two kinds of platforms, the first is to build their own platform (if the company's own **, blog, forum, etc.), small enterprises are mainly to build their own company's small **; Second, use third-party platforms (such as Google, Sina, Tencent, Alibaba, 58.com, etc., which are all very good third-party platforms). To do a good job in network marketing, these two things must not be missing; If you still use a platform for marketing, it is difficult to have a better effect, and this situation needs to be reviewed; Secondly, the first step for enterprises to carry out network marketing is to establish their own marketing platform (their own company's **) enterprise ** is the last kilometer of network marketing, so our business boss can not ignore the last kilometer of the journey, otherwise the previous efforts will be wasted, half the effort!

The purpose of our network marketing is to bring the target customers of the enterprise to this last kilometer, and to convert the target customers in this kilometer journey; Third, the analysis and research of target customers Before the car film industry carries out network marketing, it is necessary to conduct a detailed analysis of the behavior and habits of the target customers on the Internet Fourth, choose a third-party platform Fifth, seize the high-quality resources of major platforms Sixth, the essence of network marketing is to use high-quality network resources for my use, and make good use of it! Understand that the Internet is a vast ocean of information. In this boundless ocean, it is really more difficult to find an embroidery needle than to climb to the sky!

In fact, network marketing is the same as ordinary marketing in reality, that is, to occupy the market. The essence of network marketing is to seize high-quality network platform resources. The more high-quality online platform resources are grabbed, the higher your market share.

Car film industry.

Hangzhou similarities and differences SEO for you to answer, do a good job in product positioning, product quality and technical expertise are the basic requirements. Then there is the user group positioning, and there are car people who have a demand or potential demand for car film. Then it's a matter of marketing promotion, trapping old users, mining new users, WeChat, Weibo marketing, and optimizing promotion.

Expanding awareness, no matter how complex marketing is, the core is very simple, providing valuable information and services, meeting user needs and experience, and building trust and brand.

Small gray spots are inevitable Usually tear the film and rinse it with film water and gently rub the gray spots with your fingers, pay attention not to pick with your fingernails so as not to scratch the glue layer, mainly for the area of larger gray spots are more concentrated, I do not advocate the use of this method, the risk is relatively large, the fingers or glass are not clean, the more you wash the worse it is, but also depends on the hardness of the film glue layer, the soft film is not recommended to rinse. It is not recommended to rinse the film scraped with a hard scraper, as the gray spots have been firmly adhered to the adhesive line. If it is an individual gray spot, you can use a baking gun to heat it outside the film or glass with a fingernail, the gray spot will become smaller, but it can't be removed, but it doesn't look very obvious, this has higher requirements for the film, and the dragon film can, like the solar spectrum, the black can not be green, Ray-Ban can also, quantum can't, Weigu, Yuma, Emma haven't tried.

The main thing about the film is the problem of the technique The faster the technique, the less the gray spots, the new car basically does not have too many gray spots, there is not too much ash in the edge strip, and the old car can be cleaned with goosebumps before pasting, and the old car can be used to seal the edge with tape and then paste.

The precautions before the film is to choose a good store, select the film through a small sample, and it is recommended to choose a mature old store for construction;

The precautions in the film are to be optimistic about the film, carefully check, it is not excluded that some stores will do their hands and feet on the film, steal beams and change columns, and be optimistic when cutting the film, and be careful when accepting;

There are many precautions after the film: generally do not lift the glass for 3-4 days in the north, and do not lift the glass in the summer in the south; Try not to expose to the sun within two days after applying the film; One week after the film, the air outlet of the air conditioner should not be blowing directly on the film; In winter, do not open the defogging line within half a month after the film; After the film is applied, the annual inspection label should not be directly pasted on the film, and it needs to be plasticized before pasting; Do not use suction cups on the film after applying the film; When wiping the surface of the film, use a clean wet towel or wet suede.

The film is first of all baking, knife work and pasting work, small gray spots can not be disposed of, but with a baking gun to warm up with fingernails gently will be light, small gray spots are almost invisible. There are a lot of things to pay attention to when applying the film! 1 When the film is just put on, the blade should not scratch the glass2 The baking bun scraper should not be scraped against the glass when baking the film, it will also scratch 3 When cutting the film, a new blade should be used, and plastic sheets should be placed under the blade, and the oblique angle of the knife should be about 25 degrees3 The film door panel seat instrument should be pasted with a protective film4 Spray it on the film before tearing the film to remove the dust in the air In short, there are still some things that can only be understood and cannot be spoken!

You must find a master who is good at handwork, the quality of the Zhongda Oukai film I bought on Jingdong last time is really good, but it was damaged by the master, there are a lot of small bubbles, and I am angry.

There is a jargon saying "three points of film, seven points of process", and a good film needs a good process!

1. The ** stores of each brand can be found on the official website of the film brand you choose in Henglun;

2. Major 4S car dealers usually have in-store personnel for car film sales;

3. Large-scale car beauty and maintenance institutions can usually help you contact formal film sales channels;

4. Professional window film housekeepers, such as Glova in Chengdu, are different from other first-class businessmen, and Glova provides an overall solution for window film.

Generally, it is still in a special maintenance place for the car, and some car washes will also do car films.

Ask the sales channel, do you want to buy the film or sell the film?

The first generation of automotive solar film is commonly known as "dyed film". Usually the dye is impregnated on a layer of polyester film to achieve the effect of absorbing visible light, this kind of solar film is easy to apply, good shading, but the heat insulation effect is poor, easy to fade and degum, and the service life is low.

The second generation is a metal reflective film, which is also called a function, and the heat insulation function has also been improved, but when the light transmittance is high, the heat is low, and the heat is low. However, there is a possibility of oxidation of the metal plating, which leads to appearance problems and reduced thermal insulation performance, and the metal plating shields electromagnetic signals and affects the use of navigation and other equipment in the car.

The third generation is the "Intelligent Spectral Selection Film". It is the representative of the world's highest film making technology to increase the thermal insulation performance of the film by magnetron sputtering metal, or to realize the function of spectral selection through multi-layer optical film technology. It has a very high thermal insulation effect, effectively reducing the temperature in the car and improving the efficiency of air conditioning; It can also prevent the splashing of debris when the car glass is broken, and avoid the injury to the occupants in accidents.

It can block up to 99% of ultraviolet rays, which can ensure that passengers are protected from ultraviolet rays. The multi-layer optical film does not use metal plating, which avoids oxidation problems and does not shield electromagnetic signals.

Car films are divided into glass films and body films. Because people's requirements are getting higher and higher, 1. The number of car owners who replace high-end glass film is increasing every year (mainly because the film given by 4S stores is too poor and too poor. Blisters fade. ）

2. The rise of body film. In the U.S., one in six cars uses a body protector to protect the vehicle's paint intact and new. So there's still a huge market in China.

3. The film needs to be cut on the body with a utility knife, and the construction time is long. It takes a lot of patience and a lot of ingenuity. Character determines destiny. I've been in contact with a lot of good technicians, but I've also seen them cause body injuries due to their frizziness and carelessness.

4. Manual cutting film will gradually be replaced by machine cutting film. It will become easier and simpler in the future. Causing a depreciation of technology.

Car film technology is now very good, car owners are paying more attention to the maintenance of the vehicle, you can go to the auto repair school to strengthen learning.

Car film is one of the car beauty projects, which is currently a hot technology.

The car film technology is also very good.

This technique is very good, and you can go to a professional school to learn it.

This is mainly based on proficiency, and the details are also crucial.

This requires you to practice more operations, correct them in time, and practice makes perfect. I'm sure you'll be able to do it.