Radiator installation, how to install radiators

The installation of kitchen radiators, in terms of material, the kitchen is suitable for choosing steel or copper-aluminum composite radiators, the choice of these two types is for heating considerations, they have a large amount of heat dissipation, rapid heating, open 15 minutes before entering, and when they enter, it is already warm like spring, which will not make people wait too long and avoid the pain of freezing; Second, because the kitchen is full of smoke and dust, the items placed in it are easy to accumulate dust, and it will be difficult to clean up if it is too late to clean for a long time, which requires the radiator installed in it to have a smooth surface and easy to clean and take care of. Among the many product types, steel and copper-aluminum composite meet the above requirements and are deeply loved by users.

The selection of radiators does have a learning text, and the choice is not good, not only does it cost more, but it is not used. It is recommended that you choose the top ten radiator brands in China: 1) Vera; 2) Sender; 3) Trifolium; 4) Qianfeng; 5) Pyget; 6) Nuoshin; 7) Sunflower; 8) Capgemini; 9) Chase; 10) Panpan.

In addition, there are many versions of the brand ranking of radiators, you can check it on the Internet yourself.

How to install a radiator when decorating.

Heating radiators are an important part of home improvement. Although the technical content of heating decoration is not high, it has a certain risk. If the heating is not selected or constructed properly, it can cause losses to the home, which is a problem that cannot be ignored.

To this end, we asked the experts to explain what you should pay attention to when installing heating:

First of all, the selection of the shape of the radiator and the installation position should be determined according to the structure of the room

If the room is designed with floor-to-ceiling windows, it is advisable to choose a low radiator placed under the window, but for the purpose of reducing the usable area of the room, that is, starting from the decorative effect, you can also choose a high and narrow radiator placed on the side wall; If the user needs to install the guardrail in front of the window, he can choose a single-column or two-column radiator, which is not only a guardrail, but also can be heated, killing two birds with one stone; For rooms with window sills, you can choose a radiator that is approximately the same width below the window sill; Users can also choose to place taller radiators on the side or side walls of the windows. If the room adopts special-shaped (folded or curved) window sills, it can be customized according to the specific size to the professional radiator manufacturer.

There are many factors that affect the temperature of the room (such as: the temperature of the hot water in the district, the orientation of the house, the age of the building, etc.), but in general, users can calculate as follows (for reference). Take Sender's multi-column steel tube radiator MS3060 as an example, and illustrate it:

Living room, study and bedroom: 20°C 1 square meter.

Bathroom, toilet: 24° square meters.

Kitchen: 16° slices sqm.

Storage room: 12° slices square meters.

It should be noted that these design parameters are determined according to the actual use function of the room, which is inconsistent with the current domestic design standard (18°C). The user can also refer to the number of existing heating sheets when replacing them. If it is necessary to increase the amount of radiators and increase the temperature of the room, the consent of the property or development company should be obtained to avoid the imbalance of district heating, especially for single-pipe (series) heating systems that will affect the normal heating of users on the ground floor.

The installation should be standardized:

The radiator heating system has the characteristics of high technical content, long service time, and easy to cause collateral losses in case of problems, so the installation quality and after-sales service have become the second life of heating. Therefore, when buying heating and accessories, it is best for consumers not to be greedy for cheap small businesses, small brands, or street shops that do not have a reputation guarantee. Consumers are also not encouraged to install themselves, it is best to choose strong large enterprises, brand-name products, the place of purchase should be selected in large building materials supermarkets or stores, by the radiator manufacturer or sales store professionals to install, in order to ensure that the long-term interests of users are not harmed.

Depending on what city you are in, generally buying radiators is installed in a package, I am in Changsha, Wanda's ** is not bad.

Since you are considering this brand, you can go to the physical store to see the physical object, **, quality, etc., whether it is installed or not, you can also know.

You can ask customer service for this kind of advice.

Everything you buy there has a package installed.

1. Pipe cutting: Before ordering radiators, we must first understand the installation location of the radiators we ordered and the basic spacing between the radiator inlet pipe and the return pipe. After knowing the bottom spacing of the radiator, we first cut out some unwanted ones according to the height of the order, and set aside the direction of entering and returning to the water outlet.

2. Perforation: After the radiator arrives at home, we first need to know the approximate location of the radiator and the location of the accessories hanging on the solid wall. This requires us to first indicate where the radiator will be installed and place the symbol where it needs to be fixed.

After the symbol is completed, we can drill the hole directly to determine the installation position of the fitting.

3. Hang the radiator: To make a hole and fix the pendant, first place the radiator on the wall, adjust and cut off the distance between the inlet pipe and the return pipe, and whether the direction of the radiator on the wall is correct.

4. A set of buckles: fix the direction of the radiator, and we can buckle the tube. The main purpose of the sleeve fastener is to install the connecting parts between the main pipe and the radiator. Usually, the diameter is varied and the threads are aligned.

5. Connection: We can start connecting the radiator by matching the thread with the diameter of the radiator. Determine the direction of the radiator installation, add elbows or straight-throughs, add gates, and receive the inlet and return outlets of the radiator.

6. Debugging of boiling water: After all the installation procedures are completed, we can open the inlet valve and return valve to see if the water flow circulates smoothly.

7. The radiator has been installed: the detailed description of the installation method of the radiator has been written. You can try to install radiators in your home yourself. If you're busy with your homework, you can also ask a professional for help with installation.

8. Acceptance inspection: The owner accepted the entire radiator system. Usually during replacement construction, workers will reserve valves on the pipeline. After installation, a stamping test should be carried out to prove that acceptance can only be completed if there is no operation, dripping or leakage.

Dear, I'm glad to answer your <>

Answer: How to install the radiator is as follows: 1. The bottom is in and the bottom is out.

This installation method is more suitable for central heating, and the internal circulation is relatively fast, allowing the water to circulate inside the radiator. However, if it is a stand-alone installation, it is better not to use this method, because it will affect the water circulation and the heating effect is not particularly good. 2. The way of going down and going out.

This installation method can ensure that the overall shape of the radiator will not be damaged, and can effectively save materials, because its water inlet and outlet are installed below, and the connection and laying are also particularly convenient, so it is a more popular method on the market at present, which can effectively promote water circulation, and can also achieve the effect of saving money, which is a more ideal installation method. 3. The water outlet mode of the same side is up and down. The biggest advantage of this installation method is that it has a good water circulation and can increase the speed of water flow, but there is a disadvantage that it will increase the length of the pipe, and the installation cost will be relatively high.

4. The method of going up and down on the opposite side, this method is also conducive to water circulation, and it is more popular in Europe, which can make the heating effect achieve the best, and a balance angle valve can be installed at the outlet of the radiator, which can make the internal circulation more prominent.

In winter, many areas in the north will use radiators for heating, do you know how to install radiators? Next, PCHOUSE will take you to take a look.

1. Confirm the integrity of the radiator packaging before installation, adopt corresponding shockproof and anti-collision measures when placed, and the radiator cannot be dragged in any way, and the radiator should be stored in a dry and rainproof safe place.

2. The site should be cleaned up, and the valves, main pipes, branch pipes and pipe supports and hangers of the heating system have been installed and the pipeline flushing and pressure test has been completed according to the design requirements.

3. The thread of the outer interface of the radiator should meet the requirements of JG T6-1999, and the thread of the branch pipe connecting the radiator should be complete, if there is a broken wire or missing wire, it shall not be greater than 10% of the full thread buckle, and at least the complete thread above the annual palace buckle.

4. The interior wall at the place where the radiator is installed has been treated.

5. If the test pressure of steel radiators, aluminum radiators, copper-aluminum composite radiators, cast iron radiators and other bodies is not required by the design, it should be carried out according to the times of the working pressure selected by the design, but the maximum test pressure of the steel plate radiator body should not exceed and not less than the pressure test for 2 to 3 minutes without leakage to be qualified.

6. Radiator installation steps: install the water inlet valve and return valve first, fix the pendant and measure the position of the radiator with a level, place the radiator steadily, connect the valve connector with the inlet and outlet valves, and use the level to measure whether the radiator is straight and whether the pipeline installation meets the requirements. Use a pipe wrench to reinforce and tighten the connection.

Pressure test: close the main connection valve, close the inlet and return valve of the radiator, and the test pressure should be times of the working pressure for 2 to 3 minutes without leakage to be qualified.

Radiator correct installation method.

1. Lay pipelines.

After determining the installation position of the radiator, it is necessary to design the wiring line, which is generally in the ceiling, baseboard and other hidden places, and the laying of the open pipe should not affect the indoor decoration or occupy too much space.

2. Install radiators.

Put the radiator steadily, and measure it with a level to see if the installation is stable, then connect the valve connection to the inlet and outlet valves, and after checking that it is correct, strengthen it with a pipe wrench.

3. Install the wall-hung boiler.

The installation of the wall-hung boiler should be separated from the open wire and electrical equipment, that is, the distance between the wall-hung boiler and the gas meter and the gas stove should be more than 300mm.

4. Stress test and customer acceptance.

Don't forget the final test and acceptance, the construction personnel did not run, run, leak, drip and other phenomena when the pipeline was stamped and tested, and the acceptance can be carried out after inspection and confirmation by the customer. Look!