New iphone8 new SIM card how to activate

Hello, 1. When the iPhone card collapses, enter the operator activation page, which is the normal activation step for the number of mobile phone card inserts, click [Accept]. 2. Click [Accept] to return to the desktop, and find [Settings] in the application to open it. 3. After entering the [Settings] option list of the Yanyuan mobile phone system, find the [Cellular] setting for the next step.

4. Go to the [Cellular] management authorization page, find [Settings] and enable the permission operation. 5. After successfully enabling the set cellular network permission, press the [Home button] to return to the desktop of the phone, and the network status at the top can enter normal activation.

iphone8 new phone, inserted SIM card fiber.

The problem has been caused by the SIM card not being installed, and the solution is as follows:

1. First of all, place the iPhone 8

Shutdown. <>

2. Then in the box of the iPhone, find the card pin.

3. Insert the pin into the small hole on the right side of the iPhone 8, and gently push it up, and the card slot of the iPhone 8 will pop out.

4. Then remove the card slot of your iPhone 8.

5. Then install the SIM card on the card quarrel Brother Jane's slot, pay attention to the direction of the SIM card, the wrong direction will not be installed.

6. Finally, insert the SIM card slot into the iphone8, and then turn on the phone to use it normally.

Taking iphone8 as an example, the operation method of iphon8 mobile phone activation is as follows:

1. First install the nano-SIM card for the iphone8, press the power button to turn on after installation, you will see a carrier network welcome interface after booting, click accept to enter the voice selection interface, select "Chinese Simplified", as shown in the figure below:

2. Then you need to select the country and region, and then enter the keyboard settings page, after activation, we can also modify it in the "settings", as shown in the figure below:

<>4. After the network connection is successful, the system will prompt that it will take a few minutes to activate the iPhone. After the end, you will be taken to a new initialization settings screen. Then proceed to Location Services, select here"Disable Location Services", as shown in the following figure:

5. Then set up the iPhone interface, select "Set as New iPhone", as shown in the figure below

6. After entering the login, you can see Apple's "Terms of Service" and click on it below"Agreed"The wheel of repentance, as shown in the figure below:

<>8. The next settings can be selected as negative or a little cautious, such as in the settings of SARI and iCloud key string, you can directly select "do not use SARI", as shown in the following figure:

9. In the diagnostic and application analysis settings, I can directly select "Do Not Send" and "Do Not Share", as shown in the figure below

10. Finally, in the magnified display settings, select "Standard", as shown in the following figure

Change the SIM card, or don't put it in place.

This shouldn't be the iPhone of the National Bank.

My phone appeared, this kind of situation of yours.

You check to see if your phone is from the Bank of China.

First, put the mobile phone card into the card chip purchased from the Internet, and insert the card into the mobile phone.

2. Open the settings in your phone and click "Cellular".

3. Click "SIM Card App", and then click "TMI Manual Mode".

4. Select "US ATT", click "TMI Manual Mode", and select "Accept".

5. Click "Deactivate" and wait for the signal to connect.

The activation of the card machine includes SIM card insertion, boot activation, home button dialing and other operations, the specific steps are as follows:

1. First of all, put the SIM card on the card sticker and insert it into the mobile phone together.

2. Then turn on the phone, when you turn it on, skip the settings to enter the activation interface, and the mismatched SIM card cannot be activated.

3. Then we press the home button, click on the emergency call, and enter *5005*7672*0

4. Then click the dial button to dial, and an interface will pop up at this time, click ICCID to unlock.

5. Finally, enter the ICCID code to unlock it.

Note: 1. Insert the card and telecom card into the mobile phone, select CDMA3G (if your telecom card is a 3G card), or select CDMA4G (currently only the US version of Sprint, the Japanese version of AU and Softbank support telecommunications), and then click "Accept" to complete the card settings.

2. Take out the card, insert the telecom card into the mobile phone separately, after the mobile phone recognizes the SIM card, it automatically enters the "need to activate mode", at this time the mobile phone signal is out of the center of reality and 3G, if it is a 4G card, it is out of the solid 4G, click Next, use activation, prompt the SIM card is invalid, and then turn off, (wait for 10 seconds after the screen turns black to turn off completely).

There are many types of cards, and the activation methods are different for the standard frequency band design of different foreign operators, so you need to refer to the activation instructions of the card. If you can't activate the machine, you can go to a treasure to find a store to buy a card, and the other party will recommend an adapted card according to your specific model, and tell you how to activate it.

Hopefully my answer will help you.

Summary. Hello dear, happy to answer your <>

The steps to activate the SIM card for iPhone are as follows:1Insert SIM card:

Insert the SIM card into your phone's SIM card slot, usually on the side or top of your phone. Using a bending tool or piece of paper, insert a small hole in the SIM card slot to eject the card slot. 2.

Power on: Press and hold the power button on your iPhone until the Apple logo appears on the screen and the phone boots on. 3.

Connect to Wi-Fi: In the phone settings interface, find the Wi-Fi option, select and connect to an available Wi-Fi network. 4.

Activate your phone: Follow the prompts on your phone's screen, select your language, home, and region, and accept the terms of service. <>

How did you activate the card on your iPhone.

Hello dear, happy to answer your <>

Poke Sen Deficit Noisy Face]: The steps to activate the SIM card for the iPhone are as follows:1

Insert the SIM card: Insert the SIM card into the SIM card slot of your phone, usually on the side or top of your phone. Using a bending tool or piece of paper, insert a small hole in the SIM card slot and eject the card slot.

2.Power on: Press and hold the power button on your iPhone until the Apple logo appears on the screen and the phone boots on.

3.Connect to Wi-Fi: In the phone's settings interface, find the Wi-Fi option Empty Destroyer, select and connect to an available Wi-Fi network.

4.Activate your phone: Follow the prompts on your phone's screen, select your language, home, and region, and accept the terms of service.

The following is a <>< related to Tuo's omission, I hope it will be helpful to you

5.Configure your phone: Select the wifi network and enter the password, or use the mobile network to configure it6

Activate the SIM card: Follow the on-screen instructions on your phone, select "Activate a new number" or "Activate an existing number", and then enter the relevant information on the SIM card, such as the SIM card number, mobile phone number, and PIN code. 7.

Complete Activation: Follow the on-screen instructions on your phone to complete the SIM card activation process. Please note that the activation process may vary depending on the carrier and the circumstances.

If you encounter problems, you can consult your carrier or visit Apple's official ** for a more detailed how-to guide. <>

I sold an Apple phone, but I didn't have a network card, and I used to use the phone bill, so what's the matter?

It's just that there is no signal on the phone.

Kiss, have you inserted the ** card?

Plugged in the above shows no signal.

Restart the phone, pull out the ** card and wipe it and reinsert it, try it at boot<> it still doesn't work. Are you in airplane mode<>

No. The phone can't read the ** card, the problem of the phone. Repairs are needed!