How to lay the tile baseboard, what are the steps and precautions?

The decoration alone is already very complicated, if you want to get it yourself, you have to choose a variety of materials, so you have to consider the overall matching problem, but also consider the space problem, how to be more suitable for yourself, how to have a larger space, more coordinated. When decorating at home, the baseboard is also a very important one, how to choose the baseboard to match the furniture and flooring you choose in the future? Let's take a look at the question of how to choose a baseboard.

1. Choose from the material.

As far as the material is concerned, there are many kinds of baseboards, such as wooden baseboards: visually softer, very comfortable, easy to install, but more costly, wooden baseboards have poor wear resistance, are prone to dents, and have a short service life.

PVC baseboards: similar in appearance to wooden baseboards, but not wear-resistant and easy to fall off.

Ceramic and stone baseboards: Relatively cold and hard from a visual point of view, the material is hard, wear-resistant, and the overall surface is smooth, making it ideal for rooms with ceramic or stone walls.

Aluminum skirting board: durable, fireproof and moisture-proof, which solves the problems of deformation, aging, decay, and surface sticker peeling of traditional baseboards due to moisture. At the same time, the aluminum alloy baseboard has a light specific gravity and good decorative effect.

2. Choose from the color.

Under normal circumstances, the baseboard line and the door sleeve are connected, and the color of the door sleeve and the door is usually the same, so if the baseboard line and the door are in one color or a similar color, they will form a whole and thus present a harmonious and beautiful appearance in the room.

Secondly, the baseboard line can refer to the color of the floor. We all know that the baseboard is usually attached to the floor, so we can decide the color of the baseboard based on the color of the floor, so that he can show the whole space. This knowledge can be used as a reference.

The baseboard lines and the color of the floor have always been thought to weaken the extension of the floor.

Hello netizens, the tile baseboard material is hard, wear-resistant, easy to paste, and easy to install. However, the installation of tile baseboards also has its own set of more specific workflows, which need to be carried out carefully, meticulously and step-by-step. Groundwork:

Like the paving of other materials, the installation of tile baseboards should also deal with the base layer first, including drilling holes and cleaning of the base layer. Among them, the interval of the drilling hole should be reasonably arranged, for example, if the length of the baseboard is 2m, the drilling interval is generally 40cm. At this time, care should be taken to avoid damaging the water and electricity lines.

Installation work: The most important thing to install the baseboard is to fix, place the material correctly, see the position of the drilled hole, fix the baseboard with nails, make the baseboard close to the wall, and the nails should also completely enter the inside of the baseboard, leaving no extra gaps as a whole, and not allowing the nails to show the surface. During the installation process, you also need to deal with the corners and corners.

The corners are the corners of the wall, and the baseboards used here are cut, usually at a 45-degree angle, and then spliced and installed.

The quickest way to paste the tile baseboard, the operation is very simple, and the paste is durable and does not fall off.

Tile baseboard construction process.

1. Construction preparation.

1) Before construction, the wall should be carefully cleaned and watered one day in advance.

2) According to the required quantity, one end of the skirting board at the yang corner is cut into 45 degrees with a toothless saw, and the skirting board is washed with water, and dried in the shade for later use.

3) When the inlay is installed, try to paste it from the sunny corner to both sides, check whether it is straight, whether the gap is tight, whether there are defects such as missing edges and corners, and can be pasted only after passing the test.

4) no matter what method is taken, first at both ends of the wall first inlaid a baseboard, its upper edge height should be on the same horizontal line, out of the wall thickness to be consistent, and then on the two baseboards along the pull through line, block by block in order to install.

2. Construction methods.

1) Paste method. According to the wall reinforcement and the standard horizontal line, with 1:2 cement mortar plaster, and scrape the scratch, after the bottom mortar is dry and hard, the tile skirting board that has been moistened and dried is smeared with 2 3mm plain cement slurry for pasting, and the rubber hammer is smoothed, and pay attention to the level, the ruler board is leveled and straightened at any time.

The next day, the joints are rubbed with cement paste of the same color as the floor panel.

2) Grouting method. It is to temporarily fix the baseboard in the installation position, use plaster to stabilize the two adjacent baseboards and the baseboard with the ground and wall, and then grout with 1:2 cement mortar (volume ratio) with a consistency of 10 15cm.

And wipe the spilled mortar clean at any time. After the cement mortar to be poured into the final setting, then the gypsum is shoveled off and wiped clean, and the joints are wiped with the cement slurry of the same color as the board surface.

1. The maximum gap between the tile baseboard and the floor should be less than 3mm, and the coin of 1 yuan should be plugged into it, if more than 2 are stuffed in, the gap may be too large.

2. Before laying the footline, the wall with white cement should be shoveled clean, and then the footline should be laid, and the footline should be protected after paving, so as to avoid a large amount of paint sticking to the surface of the footline when painting or spraying paint. It is recommended that after shoveling the cement, the paving position should be brushed with a mixture of 107 glue and cement, and then the bricks, which can make the bricks firmer.

Similar color matching method. The color of the baseboard is the same or close to the color of the floor tiles, and the light-colored baseboard is selected for the light-colored floor tiles. The effect of matching with the similar method is more unique, concise, of course, it does not obtrusion the color of the baseboard, and it will not show its own floor tile color too much, which is suitable for the vast majority of customers.

Color matching gap method. The gap method is to choose the color that is completely opposite to the color of the wood floor, use the contrast in the middle of the tone to produce the gap effect, and match the gap color, if the color is selected properly, it can generally produce unexpected effects, but this method must have a very good understanding of the color and its residential decoration style, in order to match the appropriate gap color, otherwise it will cause violations.

Some home renovation colors are planned to be planned. There can be no more than three colors in the interior space, and the best color matching for home furniture is: shallow walls, destinations, and deep furniture.

Golden yellow and silvery white can be combined with all kinds of colors, golden yellow does not contain pale yellow, and silver white does not contain gray white. Fourth, if the area is not enclosed, the same color must be matched; Different types of confined spaces can be matched with different types of colors. If you want to create a light and modern home furniture atmosphere, you must not choose these printed items, and try to choose a solid color design scheme.

Dark green wood flooring should be used carefully. Restaurant kitchens should not be made of warm colors, other than warm colors.

How to stick the baseline? Paste method: according to the wall reinforcement and standard straight line, use 1:

2. Mix the mortar to plaster the bottom plaster, and smooth the scratches, after the lower cement mortar is dry, the baseboard of the floor tiles that has been damp and dried is coated with 2 3mm plastering mortar to carry out pasting, and use a rubber hammer to level and straighten the ground anytime and anywhere. The next day, the concrete paint slurry of the same color as the ground control panel was replaced.

Grouting method: It is to temporarily fix the baseboard in the installation method, use plaster to stabilize the adjacent two baseboards and their baseboards with the ground and walls, and use a 1:2 mixed mortar (volume ratio) with a mortar consistency of 10 15cm to grout.

And clean the outflow of cement mortar in time. After the mixed mortar to be poured into the final setting, then the plaster is shoveled off and wiped clean, and the joints are wiped with cement mortar of the same color as the surface.

When the tile baseboard is pasted, the wall is treated first, and then the cement mortar is used for plastering, and then the plain cement can be pasted after the mortar is dry; I think that when matching the color of the tile base, try to choose one color or choose other colors of the same color.

If you want to put tile baseboards in your home, you must make some preparations a day in advance, such as moistening the walls with water. Then we need to rinse the baseboard in water and then dry it in a cool place. Then the second step is to start drilling, which must be found in advance, for example, we need to determine the location of the hole according to the location of the water and electricity pipes.

Then we need to make a horizontal line on the wall, and we need to work according to this horizontal line when applying the tile baseboard.

Tile baseboard color matching method:

1. Choose the color of the baseboard according to the color of the door sleeve line. The main feature of this method is that it allows the whole room to have a consistent color tone. The color of the door cover line is the same or close to the color of the door, and the color of the door is the main color of a room.

I highly recommend this method. You can also consult with the designer, but generally they think about the overall style. It is worth mentioning that the width of the baseboard is also particular, and the baseboard should be selected according to the height of the entire room.

2. According to the color of the floor or floor tile, the color of the baseboard should be close to the color of the floor and slightly darker than the color of the floor. In this way, the effect displayed is more beautiful and generous. This method is suitable for most users.

There are also a selection of colors that are completely different from the flooring, and sometimes there are unexpected effects.

The tile baseboard should be installed according to the tile alignment, the color of the tile baseboard should be consistent with the overall floor, and attention should be paid to a reasonable match.

In the face of decoration in today's life, many friends don't understand, and they don't know what to do and what not to do. As far as wall decoration is concerned, some homes have special requirements and will pave wall tiles, so do you need to make baseboards for wall tiles? What are the precautions for the construction of wall baseboards?

Let's search for the answer. In the face of decoration in today's life, many friends don't understand, and they don't know what to do and what not to do. As far as wall decoration is concerned, some homes have special requirements and will pave wall tiles, so do you need to make baseboards for wall tiles?

What are the precautions for the construction of wall baseboards? Let's search for the answer.

Do I need to make baseboards for wall tiles?

In fact, after the bedroom and living room walls are tiled, it is generally necessary to make baseboards, of course, it is okay not to do it, but the aesthetics are not as good as those that have been made.

There are two main reasons for making baseboards after tiling the wall, one is for the aesthetics of the room, and the other is to make the hierarchy of the room more distinct, and also to provide standards for placing furniture.

In addition to preventing the wall from being soiled, the baseboard in the house can also make the combination between the wall and the ground more firm, and prevent the wall from being deformed and damaged because of the collision of external forces; At the same time, the baseboard should be tiled and stone, etc., which is very easy to scrub, such as the owner often mopping the floor, it is easy to splash dirty water on the bottom of the wall, so it is easier to wipe it clean.

Skirting board is a special word used when decorating. In the design of the living room, the yin corner line, waist line, and baseboard play a role in visual balance, and the use of their linear feeling, material, color, etc. echo each other in the interior, which can play a better beautifying and decorating effect.

Precautions for the construction of wall baseboards

1. Whether it is polymer, MDF, or wood baseboard, it will have the characteristics of thermal expansion and cold contraction, so the baseboard against the corner of the wall should also be the same as the floor, leaving an expansion joint of about 1cm. Before fixing the baseboard, the wall should be leveled and cleaned, otherwise after the baseboard is installed, it will not be completely attached to the wall, and it will leave unsightly gaps.

2. Because in home decoration, the pipeline of the hydropower project is buried in the wall, and the position of the pipe is directly below the wall switch socket, so the position should be calculated when punching holes to avoid damage. Before drilling, it is necessary to observe the wiring direction of hydropower to prevent errors. The interval between the drilled holes should not be too large, otherwise it will be difficult for the baseboard to stick to the wall.

3. The baseboard is originally an expansion joint to cover the floor and make the ground more beautiful. Therefore, the edges where the baseboards intersect should be scraped with a planer, so that the baseboards are completely close to the wall, leaving no gaps, and the flatness of the corners of the wall should be paid attention to here.

Do I need to make baseboards for wall tiles? The above is the answer to the related questions, in fact, it is necessary to make the baseboard for the wall tiles, which can make the living room more coordinated, and it is also convenient for people to clean.

In the general home, the floor tiles are tiled, and the walls will be decorated with putty powder and other decoration methods. You will find that the part of the wall that touches the floor will become dirty, because the usual walking and cleaning of the occupants will be contaminated with dirt, which will inadvertently affect the aesthetics of the wall. Therefore, products such as tile baseboards have always been loved by everyone.

If the dirty substance is on top of the baseboard, it will be easier to clean the surface, and it will also make for a better match between the wall and floor decorations. So what is a baseboard for tiling?

Ordinary cement. Usually, tile baseboards are made of all-porcelain, so the water absorption is relatively low. When laying and using baseboards, the insulation of the outer wall can be used.

The material is made of straight cement, quartz stone, etc. Their proportions and formulations are very scientific, so it has a very good adhesion, so the adhesion of the tile skirt is guaranteed. Target.

tile adhesive. Tile adhesive This product is specially used for the bonding of ceramic tiles, so tile adhesive has good adhesion. This is a very good option for laying and using tile baseboards.

The use of tile adhesives is non-toxic and environmentally friendly. The construction is also convenient, and the use of baseboards does not drop. The performance was very strong.

Bonding mortar. When laying baseboards, it can be used to glue mortar. The adhesive mortar is made of cement, quartz stone and polymer.

It is handled by a unique process. As a result, the adhesive mortar has very high strength adhesive properties and is used for tile baseboards with very good performance and effect.

Nail glue. What is Nail Glue? By the name, you can know that it is a super glue.

The adhesive strength of this nailless adhesive is very strong. If it is used to lay baseboards, it has very good adhesion and guarantees tile kicking. The use of threads does not fall.

Tile baseboards are placed on the walls, not only to ensure aesthetics, but also to ensure that the use of tile baseboards does not fall off, otherwise no matter how beautiful the tile baseboards are, they are not practical enough. Therefore, when laying tile baseboards, it is essential to use the materials described in the small series in order to bring good adhesion to the tile skirts, which can be better guaranteed. Use tile baseboards.

You can get it for free