What is the use of custom wardrobe closures, and how to install custom wardrobes

Custom wardrobes also need to have a closing strip, which is mainly used for the following purposes:

1. Moisture-proof, whether the substrate is MDF, solid wood particle board, or other boards are more afraid of moisture, if not protected, over time, the wardrobe will be broken;

2. Insect prevention, the opening is easy to moth insects;

3. Reduce formaldehyde emissions and seal them, and the emissions of formaldehyde will be relatively less each time, and the harm to the human body will not be so great;

4. The overall beauty, if there is no sealing note, the overall look is weird, and there is no beauty at all;

5. Reduce damage, if there is no sealing strip, children or adults accidentally touch the top and it is easy to scratch the hand, so that the edges and corners of the wardrobe can be smoothed out;

Custom wardrobe closure strips are mainly used for the following purposes:

1. Moisture-proof, whether the substrate is MDF.

Or solid wood particle board.

, or other plates.

are more afraid of moisture, if not protected, over time, the wardrobe will be broken;

2. Insect proof, the opening is easy to moth insects.

Target; 3. Reduce formaldehyde emissions and seal them, and the emissions of formaldehyde will be relatively less each time, and the harm to the human body will not be so great;

4. The overall beauty, if there is no sealing note, the overall look is weird, and there is no beauty at all;

5. Reduce damage, if there is no sealing strip, children or adults accidentally touch the top and it is easy to scratch the hand, so that the edges and corners of the wardrobe can be smoothed out;

Above, I hope it can help you!

Custom wardrobe closure strips are mainly used for the following purposes:

1. Moisture-proof, whether the substrate is MDF.

Or solid wood particle board.

, or other plates.

are more afraid of moisture, if not protected, over time, the wardrobe will be broken;

2. Insect prevention, the opening is easy to moth insects;

3. Reduce formaldehyde emissions and seal them, and the emissions of formaldehyde will be relatively less each time, and the harm to the human body will not be so great;

4. The overall beauty, if there is no sealing note, the overall look is weird, and there is no beauty at all;

5. Reduce damage, if there is no sealing strip, children or adults accidentally touch the top and it is easy to scratch the hand, so that the edges and corners of the wardrobe can be smoothed out;

Above, I hope it can help you!

According to the size of the gap between the wall and the wardrobe, prepare the appropriate size of the wardrobe closing strip, modify the wardrobe closing strip to the appropriate size according to the size of the gap, and stuff the wardrobe closing strip into the gap between the wall and the wardrobe, so that the wall can be closely connected with the wardrobe, keep no gaps, and use glass glue to fill the gap between the wardrobe closing strip and the wall to avoid the movement of the wardrobe closing strip.

Before installing the wardrobe, you should first understand the size of each plate in detail, and you should determine the specific installation location of each plate, and then start the installation after determining it clearly, so as to avoid installation errors in the later stage and the phenomenon of rework.

Custom wardrobe considerations.

The style of furniture should be matched with the style of the living room in order to set off each other, the overall wardrobe customization is the same, the design and style of the bedroom space, are important factors that affect the design of the wardrobe style, try not to mess with it for your own preferences, resulting in the original style contrary to the original, it seems more inconsistent.

The design of the wardrobe should take into account the needs of the members who use it, and then make a clear distinction according to the different users of the person. For example, a couple's wardrobe can be arranged in a left-right structure, with the husband's clothes on the left and the wife's clothes on the right. Then the clothes rail and partition are set according to the different heights of the two people, the left side is set up with a tie grid and trouser rack, and the right side is set up with a jewelry cabinet and a tic-tac-toe rack to facilitate the daily use of the two.

The closing strip is also called the edge strip, and the closing strip plays a role in firmness and seam. Corners and walls can be used to make a closing strip, add a board with the same as the closing strip behind the closure (you can fix the closing strip, the size is arbitrary), fix the board and the closing strip together, and then put the closing strip in the position of the flat door panel, and then fix the board behind the closing strip from the side panel of the cabinet. There is also a situation that the closing strip is in the dark corner cabinet (the corner cabinet, which cannot be seen in the inside), and such a closing strip is directly fixed on the cabinet.

Most of them will be added, one is neat and beautiful, and the other is to prevent friction and fluffing. Especially in the following two cases, it must be added, leaving no gaps to make it more beautiful.

Generally speaking, the wall is more or less uneven, and even some are not visible to the naked eye, but a dozen of the wardrobe only to find that it does not fit, and there is a gap between the installed wardrobe and the wall, and after adding the closing strip, this problem can be perfectly solved, so that it looks more integral and beautiful.

Wardrobe size deviation custom wardrobe is measured first, and then processed and assembled, which will inevitably appear in the middle of the size deviation, although according to the requirements will be controlled within 2mm, but it is also difficult to achieve a perfect fit with the wall. After using the closing strip, you can directly modify it to avoid hurting the cabinet, which effectively reduces the risk of returning to the factory.

In addition, we need to understand that the custom wardrobe is not accurate to the millimeter, as long as your wardrobe is against the wall, there will be more or less errors on the ground, top or wall, then another way to make it a little bigger, and the space can not fit the wardrobe.

Therefore, the more experienced merchants or designers, they will require the addition of edge strips on the wall side of the wardrobe, which is generally 3 5cm wide, in addition to the above reasons, it can also enhance the contour of the wardrobe itself. Of course, it is not excluded that some families add a closing note purely for the sake of beauty.

It is necessary to add a mouth strip, because this will make the quality of the custom wardrobe better, and the outside will be more beautiful.

I think it's necessary to add it because it makes the wardrobe easier to use and doesn't break easily.

It is very necessary to add a slip. The closure strip can prevent the place where the cabinet is in contact with the wall from falling off, and at the same time, the delay cabinet is more beautiful.

Personally, I don't think it's necessary to make a closing note, because it doesn't affect the normal use of it or not, and it doesn't affect the overall aesthetics if you do it, of course, it all depends on your own ideas.

The closing board is attached to the side of the finger wardrobe against the wall, and the joints are patched with latex paint material.

The closure board should be cut according to the angle of the wall and then installed.

After the closure board is installed in the blind tomb, it is directly attached to the wall, and then the latex paint is used to repair the joints.

Leave at least 5 cm of seam before the installation of the closing board, and then cut the trim board according to the wall surface for installation.

You can choose a color transition.

For example, if you are too white or too white, you can also choose a light gray transition. Because these colors are all wild colors to mark friends.

The closing strip, also known as the edge disturbing slag strip, is a metal strip that is pasted with bark to cover the seam after the furniture veneer Kai Li Huai board, mainly playing the role of covering the seam.

Custom wardrobes also need to have a closing strip, which is mainly used for the following purposes:

1. Moisture-proof, whether the substrate is MDF, solid wood particle board, or other boards are more afraid of moisture, if not protected, over time, the wardrobe will be broken;

2. Insect prevention, the opening is easy to moth insects;

3. Reduce formaldehyde emissions and seal them, and the emissions of formaldehyde will be relatively less each time, and the harm to the human body will not be so great;

4. The overall beauty, if there is no sealing note, the overall look is weird, and there is no beauty at all;

5. Reduce damage, if there is no sealing strip, children or adults accidentally touch the top and it is easy to scratch the hand, so that the edges and corners of the wardrobe can be smoothed out;

Of all the custom products, the wardrobe installer is the simplest and easiest for novice installers to use, but it is also the most test-up for an installer's skill.

The installation procedure of the wardrobe is very simple, the basic order is the base, the middle side, the back panel, the top plate, the fixed shelf, the side panel, the top cabinet, the door panel, but because of the different processes of each factory, there are also side panels installed first, and then the top panels.

If you want to install a custom wardrobe, first be familiar with the installation drawings, understand the designer's intentions and the customer's ideas, communicate with the product designer in time if you have any questions, and don't simply operate with your own ideas, because everyone has their own way of understanding aesthetics, and it is only good for you to understand the designer's intentions and the customer's ideas.

There is an old saying: people are not as good as good at home, which means that the tools used to do the work are very important. After a group of wardrobes are installed, whether they are horizontal and vertical, whether the base is evenly stressed, whether the wardrobe face is on a plane from top to bottom, and you will know when you hang the door panel, the door panel is the ruler of the inspection cabinet, and if you fail to meet the design requirements, it will be reflected in the door panel.

So in order to avoid embarrassment, but also to save physical strength and time for yourself, there is an infrared five-line level.

Very important. Adjusting the door panel can best test the proficiency level of an installer, the door panel is the face of the wardrobe, the door panel is not hung well, and the front work is all white. Before hanging the door panel, first find the order of the door panel, don't make the shape upside down, it is best to put the door panel on the wardrobe before installation, and then find a good base point, and it is best to hang the door panel when each hinge.

Only play a self-tapping nail first, which is conducive to subsequent adjustments.

Installing a custom wardrobe is really simple to say, but to achieve perfection, it really takes years of experience from an installer.

The professional installer will process the closing board according to the gap between the wall and the wardrobe, and where the gap is small, the board tip will be thinner. In this way, the closing board becomes a plate with different thicknesses at the top and bottom tangent to the gap. Finally, put it into the gap between the wardrobe and the wall, so that the wall and the cabinet are connected without gaps.

Finally, use glass glue to close the edge between the board and the wall. If you really can't install it, let the customizer complete the installation or direct guidance.