-
The capacity of the hard disk only determines the ** of part of the hard disk, in fact, the difference between the production cost of a 500M hard disk and the production of a 500g hard disk is not more than 50 yuan, and in fact, the market ** of the two in a certain period of time is definitely not only 50 yuan.
There are naturally many reasons why people ** old hard drives:
Dismantled into parts for maintenance; Replacement of old models; Assembling portable hard drives; Dismantling research, teaching, etc.
-
Because of technical reasons, the capacity of the early hard disk is generally not high, but the shape is the same as the current hard disk, for example, the volume of your 80G hard disk and 500G hard disk are the same size, in order to reduce the use of costs, manufacturers will ** small capacity hard disk into the reproduction process, the production of larger capacity hard disk. Done, thanks!
-
Oh, it's because some people use the old machine, the parts have long been discontinued, the hard disk is broken and can't be made, the new one is not suitable, so you have to buy a second-hand one, and the general ** is still very high, my friend used IBM's, the old notebook, the hard disk is broken, 40g, it cost 200 to buy a second-hand one, hehe.
-
Hehe, I'm just doing repairs.
In fact, many 80G hard disks are required by Internet cafes or maintenance personnel.
Of course, different places are different, at least here we are.
Maintenance personnel often have to use hard disk copies to install, and there are various uses.
It is not recommended to use the old one for ordinary families.
-
Some of these old-fashioned machines can't use large-capacity hard drives, but some can't buy old-fashioned ones, so they can only buy second-hand ones, but there are few of them, so they're expensive.
-
Agree with the answer on the first, second and third floors, and on the fourth floor, quite speechless!
-
, 1t of the new disk you 200 to 300 **, according to today's **, how many do you want and how much I want, now.
8T disks are basically arrays of several disk groups, single disk 8T, it seems that Seagate has one, it is a mobile hard disk, **you can refer to**, a single disk 6T Western Digital Yellow Disk.
I've seen the largest capacity disk, but I want to tell you that a single disk with more than 2T hard disk is generally not divided into areas by people who don't know how to partition, that is to say, disks larger than 2T, and the computer only recognizes 2T.
-
No, even second-hand, it's hard to find.
Most of the hard disks of this capacity are IDE interfaces. There is also a SATA interface. It was six or seven years ago.
Today's hard disks start with a capacity of 500G, and 1000G and 2000G are very popular hard disks. 3000g and 4000g have also been sold for two years.
At present, only SSD (solid state drive) hard disks are available in 80G products.
As far as the computer is concerned, the 137G capacity limit of the hard disk is easy to solve, if your computer hard disk is a SATA interface, you can directly buy a 500G hard disk, set the jumper to reduce the speed to use.
It is also possible to purchase SSD hard drives.
-
There are four basic single acacia hoods in the computer, B, KB, MB, and GB.
This problem arises because of the conversion problem of each unit, because the manufacturer of the computer, the production of hard disk is 1000b = 1kb, 1000kb = 1mb, 1000mb = 1gb, his carry is 1000 a round, and the carry in the computer is 1024 a round, that is, 1024b = 1kb, 1024kb = 1mb, 1024mb = 1gb. In this way, the larger the hard drive, the greater the difference between the capacity of the hard disk and the hard disk said by the manufacturer.
If you are a 120G hard disk, according to the manufacturer's conversion, 120GB = 120 * 1000MB = 120 * 1000 * 1000 KB = 120 * 1000 * 1000 * 1000B, if you install it on the computer to convert it back, the capacity on the computer is 120 * 1000 * 1000 * 1000 * 1000 = 120 * 1000 * 1000 * 1000 1024 KB = 120 * 1000 * 1000 * 1000 1024 1024mb=120*1000*1000*1000 1024 1024 1024gb=。
In this way, it is almost the same as the one on your computer, and the production process of different manufacturers is different, which produces these subtle differences.
It's not like this, it may be that your computer has done a one-click restore, you need to grid a hidden partition, this partition is usually invisible to you, he is used to install the system program in your C drive, that is to say, when you use one-click restore, the system uses the backup system in the hidden partition to overwrite your C drive.
Adding a good one can not only speed up the access speed, but also make the spare parts data safer.
If you don't have much left, copy it out and reformat it. If you already have a lot of things, you can also copy the things on the second disk to the first disk, and then use partition magic partition software to adjust, but the space causes data loss, and it is generally recommended to back up first, which is similar to the first method. In fact, I think it's better to divide it into two areas, if there is a problem with one of the data, it can be backed up separately, and it is easy to organize.
Big brother, after the hard disk partition will "waste" some vendors' tricks, using different conversion methods: >>>More
The graphics card can't keep up.
If it's not a problem with the graphics card. >>>More