What is the reason for the chirping noise from the water pipes upstairs?

Upstairs, when the sewage is discharged, the sewer pipe will make noise, the main reason is that the sewer pipe is relatively thin, so the noise is more obvious.

This is because there is a sound when the water pipe is released upstairs and reaches the plastic pipe. Basically, the higher the floor, the louder the sound it makes.

The reason for the dripping noise of the water discharge from the upper and lower sewers is the sound of running water and the friction of water. There must be a sound in the pipe, and that sound is chirp.

Well, if you continue to say that the sewer pipe is not sealed properly, it will make some noise, and it will be a bit troublesome to continue to go.

If there are all kinds of noises coming from the sewer pipes upstairs in your house, it may be because there is a leak somewhere upstairs, so you need to find a renovation worker to check.

The noise emitted when the water is discharged from the upper and lower floors is due to the vortex pressure formed when the pressure of the water goes down.

The noise of water coming out of the upper and lower pipes upstairs is a problem with the pipes, which has no effect, but it is just not good.

On the way, what is the reason for the sewer after school, the reason for this picture is that the sewer pipe does not have the protection of Zhao Yun, so it is caused by the down.

This may be that there is some blockage between the water pipes, and the water is not very smooth, so there will be these sounds, so the best words should be dredged, so that the property should be okay like this.

The small blackboard upstairs makes a noise from the machine when the water is released, probably because the soundproofing facilities are not very good.

The noise caused by this type of water pipe is also caused by the flow of water from the upper and lower discharges.

In fact, it is the sound of water colliding in the water pipe, and some water sounds are very normal. In fact, it is the sound in the air that can travel.

That's the water upstairs, and your walls aren't soundproof, so it's normal to make this sound.

This is the sound of water flowing in the water pipe, and the water pressure is unstable, so there will be this sound, not always.

There is a sound from the upper and lower water pipes upstairs, and it is possible that the exhaust vents are blocked on the top floor.

This may be the sound caused by friction between the water flow and the rough places inside the pipe?

It's the sound of the water washing over the walls of the sewer pipes, and there's nothing you can do about it.

This is caused by the sound of air circulating through the void.

There is no pressure in your class. So we're nailing you straight to it.

What is the reason for the noise caused by the discharge of water from the upper and lower pipes upstairs? The pressure of the water is high or it is caused by a leak in the water pipe.

There will be a chirping noise when the water is discharged from the upper and lower sewer pipes, and it should be that there is residual air in the sewer pipes.

Upstairs, the water pipe makes a chirping noise, and there will be a sound when the water pressure is high, so it's good to put it for a while.

In this case, it is best to find a property to see, and you should not know what the reason is.

Then the upper and lower water pipes are issued. What is the cause of the chirping noise made by the discharge of water? I think the main reason is the pressure of the water.

What is the reason for the sound of water from the upper and lower water pipes upstairs? It could be a problem with the water pipes.

That's not water hammer. Water hammer is a thump. That's, generally, there's a master valve where your house is ringing.

When the water flows through this valve, it generates a rapid vortex with a lot of energy, which causes the resonance of the pipe wall and produces a howling sound. Changing the structure of the water valve to another structure can solve the problem.

This is normal.

This vibration is caused by water hammer, which is a phenomenon of instantaneous high pressure when a waterway suddenly opens or closes.

This phenomenon is most obvious when the waterway is opened for the first time, there is no water in the water pipe, and a rush is generated after the water is suddenly opened, and the energy generated is very huge, and there are often pipe accidents.

This phenomenon in your home is caused by the water hammer phenomenon caused by the inertia of the forward flow of water in the water pipe when the waterway suddenly closes, and the vibration noise of metal pipes will be louder than that of plastic pipes.

It may be the vibration caused by the high water pressure and the poor installation of the pipes.

This is supposed to be a water hammer phenomenon, which is caused by the high pressure of the tap water.

Summary. What should I do if there is a dripping sound in the bathroom and I can't find the reason 1, when dealing with it, we should first see whether the water pipe above the ceiling is not installed, you can remove the top gusset plate of the bathroom and find the leakage point. 2. If the upstairs bathroom leakage measures are not done well, resulting in water leakage in the bathroom, then you must communicate with your neighbors and re-do waterproofing.

3. If there is a dripping sound in the bathroom and no leakage is found, you can use soundproof cotton to wrap the U-shaped pipe of the top toilet. Because the expansion joint under the tee of the sewer pipe is louder when the water is flowing, the sound of running water will disappear if the surface is wrapped with soundproof cotton.

Whenever there is a flow of water in the sewer pipe of the upstairs bathroom, how to solve the dripping sound.

What to do if there is a dripping sound in the bathroom and can't find the reason 1, when dealing with it, you should first see whether the water pipe above the ceiling is not installed, you can remove the top gusset plate of the bathroom, find the leakage point and mess, if the water pipe is broken, repair or replace it in time. 2. If the upstairs bathroom leakage measures are not done well, resulting in water leakage in the bathroom, then it is necessary to communicate with the neighbors, and then re-do the waterproofing. 3. If there is a dripping sound in the bathroom and no leakage is found, you can use soundproof cotton to wrap the U-shaped pipe of the top toilet.

Because the expansion joint under the tee of the sewer pipe is relatively loud when the water is flowing, the sound of running water will disappear if the soundproof cotton is replaced on the surface package.

What should be paid attention to in bathroom decoration 1, the roof selection bathroom often uses the orange stove to the water, so the interior is more humid, so you must choose waterproof materials when decorating. Whether it is the ground or the top, we must pay attention to the waterproof effect, if it is the top decoration, we must choose the appropriate ceiling gusset, not only waterproof, but also pay attention to anti-corrosion. 2. When the ground is treated and decorated on the ground, ceramic tiles are usually selected, and waterproof and non-slip tiles must be selected to ensure the safety of the user.

And the bathroom should also be waterproofed, otherwise the water in the bathroom leaks to the neighbor's house, which will be troublesome. 3. The slope decoration bathroom should not only pay attention to the overall beauty, but also pay attention to many small details, which must not be ignored. For example:

The ground around the floor drain should be designed with a slope to facilitate drainage and prevent water accumulation on the ground. Moreover, long-term water accumulation on the ground will also damage the waterproof layer and cause water leakage on the ground, so the slope design is very important.

If it is not the sound made by the people upstairs, it is the sound of the reinforced concrete of the building itself through the thermal expansion and contraction of the steel bar, which is a normal phenomenon, there is no need to worry, every building has such a phenomenon.

If you make sure that there is no human factor to cause the sound, 1 is generally caused by thermal expansion and cold contraction, probably at night when you feel that the house is cool, at this time the surroundings are quite quiet, it sounds very loud, some like footsteps, some like the sound of stones hitting the floor, etc.

Because the floor is a drum surface, it rises during the day when it is heated and expands, and at night, when it is cool enough, it collapses violently and vibrates and makes a sound. Some houses in remote places produce such situations, and the bench is often suspicious3 and suspicious4.

Water hammer. We know that when the valve is opened, some of the faucets are sprayed with water, which means that the water is flowing very fast, in other words, the water has a lot of momentum.

So, when the valve is closed quickly, the change in momentum will cause a sharp change in pressure within the water pipe, which will cause pressure to impact the pipe wall.

This impact causes the wall of the pipe to vibrate and produce a sound like a hammer hitting the wall of the pipe, a phenomenon known as water hammer.

At the same time, water has a certain degree of compressibility, and when the sound passes through a concrete wall, it sounds like a marble drop.

Because the water will bounce around in the water pipe, and then gradually reduce the impact force, just like a marble that bounces up and falls back into place, gradually decreasing to make a "click" sound.

So, if you've ever heard something like this, it could be because there's a water pipe in your ceiling or through the walls of your house, and then someone in the building quickly turns off the faucet or flushes the water and causes water hammer.

This phenomenon is enough to explain the "marbles falling" sound I encountered, because the water pipes in our townhouses are intricate and supply many households at the same time. But there are also many who do not agree with this explanation.

Tan You's marbles dropped".

In addition to this water hammer phenomenon in pipes, there are other phenomena that can cause sounds, such as the bursting of air bubbles trapped in water pipes.

Fast-flowing water always creates bubbles that burst and reverberate in the pipes. However, this usually produces only a single sound. Instead of the sound of marbles falling.

Pictured: Perforated plate building materials.

In addition to the plumbing, some people also think that the ceiling or the floor you are on is at fault.

Because the ceiling used in the previous building was made of perforated panels (like the picture above), and this perforated board may crack, which can come from thermal expansion and contraction, or from the instability of the structure itself, and then the internal pebbles will jump in the holes, so that there is a sound to bend.

Yes, but not very much.

But this is very difficult to completely insulate sound, so you can only try to wrap soundproof cotton, there is that kind of black soundproof cotton, spiral wrapping to do sound insulation.

How to do soundproofing of the house:

1. A wall. You can buy some soundproof cotton or soundproof panels, and then install them on the wall, which can effectively help the wall improve the sound insulation effect. You can also add a layer of polyester fiber insulation to the wall to improve the sound insulation of the wall, but when installing, be careful not to spread too thick, but not too thin.

2. Ceilings and floors. A carpet can be placed on the floor to improve the sound insulation of the floor. As for the ceiling, we can do the ceiling treatment at the ceiling position, or add a layer of soundproof decoration material directly to the ceiling.

3. Windows. Under normal circumstances, the noise comes in from the window gaps, if you want to improve the indoor sound insulation effect, we can paste a layer of sound insulation film on the window, and you can also paste some sealing strips with better sealing at the window gaps, or directly modify the window frame of the window into a more sealed window frame, such as: plastic steel, glass fiber reinforced plastic, etc., the sound insulation effect of these window frames will generally be better, and the glass in the window can generally be modified into double glazing will be more soundproof.

4. Door. In order to effectively prevent noise from entering the room from the door, we can paste a layer of soft packaging with sound insulation effect on the door, paste some sealing strips with sound insulation effect at the door crack, or directly modify the door into a door with better sound insulation effect.

It is best to insulate the bathroom pipes with soundproofing.

This is because most of the decoration does not do sound insulation treatment for the sewer pipes, only wrap the pipes, so that it causes noise, affects the quality of life, and it is difficult to do rescue treatment in the later stage, or it is very troublesome to deal with. In the decoration process, the pipe is wrapped with soundproof material, and then the cement brick is used to build it, but now the new pipe material is used, the new material is very thin, and the pipe is picked up without affecting the space, and the porcelain is pasted, so that there is no sound of running water.

This problem exists in buildings all over China

Sewer noise is generally caused by the low-frequency noise caused by the water hitting the pipe wall and the high-frequency noise of the large water flow during flushing. The sound is amplified by repeated refraction in the pipe, and the most likely location for household pipe noise is the elbow of the pipe, and the straight pipe wall is the culprit of sound wave reflection and resonance.

How to reduce noise:

At present, ordinary noise prevention and control is mainly done by soundproof cotton, although it can greatly reduce noise, but it is only a simple isolation of noise, and it cannot be fundamentally solved.

If you want to go to the next level in the ordinary sound insulation effect, we have to start from the source of noise, a new generation of sound damping sheet will solve this problem very well, the vibration of the pipe wall is the main reason, the use of damping sheet + sound insulation cotton together, it will greatly reduce the vibration of the pipe wall, so as to reduce the generation of noise, to achieve the maximum sound insulation effect.

There are two main reasons why the sewer pipes in the home need to be wrapped, one is to be soundproof, and the other is to make it look more beautiful. Here are a few ways to wrap the sewer pipe.

First of all, there are two less common ones, the first is to make a frame of a wooden keel next to the water pipe, and then install a gusset of PVC on its surface. The other is to nail a layer of wood on the surface of the keel frame, and then add aluminum-plastic panels. However, in this case, the wooden keel is more likely to deform due to moisture.

I don't know if the horizontal pipe you are talking about is on the roof or on the ground, the vertical water pipe that passes down from the upstairs of my bathroom is close to the ground elbow, as long as the water is put on it, my house is the sound of rushing water, I thought of several ways, and finally it was wrapped with cement at the bend on the ground to completely solve the problem, and now the sound is almost inaudible.