Questions about gamepads, how to use gamepads

The motherboard doesn't support it, and it's possible that there may be a problem with your interface.

Flashing the motherboard BIOS to a new one should be fine

Go online and find the flashing BIOS tool on your motherboard and the new BIOS file (.).bin) Put the BIOS flashing tool and BIOS files on a clean floppy disk, and use the DOS boot disk to boot the computer into DOS.

When writing, the BIOS file may be prompted to make a backup, whether to do a backup or not depends on the individual) There is one point to pay attention to!

Do not lose power when writing BIOS files! Otherwise, if the flashing fails, the computer will be completely paralyzed! A professional burner is required to rewrite the BIOS information! (It's a trivial matter to re-burn and spend some money, and it's annoying that you can't use a computer if you fail to write, right?) )

Hope these help you hehe.

That is, there is an interrupt port of GamePort in the BIOS, set it to "Enable", and the port can be set to one. Because you should have a port on the sound card that is dedicated to connecting to the game settings, your system thinks that you are plugged in the wrong port. If you don't have the option in your BIOS, you can try adding a new piece of hardware to your system and then assigning a port to the controller, which is theoretically possible.

If you take a look at its help file, it will definitely install successfully, and I've had this situation too!

It's hard to explain, you can see the problem!

Take a look at the control panel, the control panel - hardware and sound - devices and printers, if the handle is plugged into the computer, there will be a handle icon in it. Right-click on the game controller settings - properties, if the controller responds, it will be connected successfully.

A gamepad is a common part of a video game console that controls a virtual character in a game by manipulating its buttons, etc.

The standard configuration of the gamepad was established and implemented by Nintendo, and it includes three control buttons: the D-pad (direction), the ABXY key (action - which is also marked by hardware manufacturers in different ways, but the arrangement is more or less the same), and the select and pause button (menu). Foreign countries are mainly console controllers, Microsoft's Xbox series and Sony's PS series.

Most of the controllers compatible with multiple modes in China are implemented by Beitong gamepads, including: mainstream computers (PCs), smart phones, smart TVs, etc.

Introduction:

The standard configuration of the gamepad was established and implemented by Nintendo, and it includes three control buttons: the D-pad (direction), the ABXY function key (action - there are also hardware manufacturers who use different methods to mark, but the arrangement is more or less the same), and the select and pause buttons (menu).

With the upgrading of gaming device hardware, modern gamepads have been added: analog sticks (direction and view), triggers, and home menu buttons.

After plugging it in, try it with an arcade emulator first, and then set it up in the control panel, and then some games, such as some online games, need to be patched before they can be used, and most RPG games can be used directly.

The analysis is as follows:

1. Go to the control panel and take a look, the control panel - hardware and sound - equipment and printer, the handle is plugged into the version of the computer.

There will be a handle icon in it.

2. Right-click on the game controller settings-properties, move the handle to see if the interface is responsive, if it doesn't respond, it's a problem with the controller. If there is a response, it is estimated that the game's support for the controller is not good, and then you need mapping software, such as joytokey.

Analog stick,It can be used as a direction in the King of Fighters simulator,It will feel much better.,Basically, you don't need to set it.,Just set the D-pad keys.。

No. In addition to the simulator game needs to be tuned.

Others can be used directly as long as the handle is supported.

You first see if the controller driver is installed correctly.

Go to Control Panel--- printer and other hardware--- game options --- properties.

Look at the handle button and there is no response.

When playing games, there are generally control settings in the advanced settings, and there is a place to choose a keyboard or controller, and joy1 is generally selected

In the setting button on the euro.

The game has: Dynasty Warriors

Grand Theft Train. Esu.