New laptop hard drive partition, new laptop how to partition hard drive partition

Updated on number 2024-02-08
12 answers
  1. Anonymous users2024-02-05

    Maybe you don't understand a lot, just use a data to say, 1g=1024m know, right? But now the producers are calculated according to 1g=1000m,This is the problem of the base system,All storage products will be like this,The capacity to read on the computer is less than marked,So it's normal for you to have less capacity。。。 As for the black screen you said, Khan.

    You're really a rookie... That's power saving protection! When you don't operate the laptop for a long time, the system will automatically switch to power-saving mode in order to reduce power consumption, so this book is the same, and the desktop can also be used!

    Of course... If you don't want this, you can go to the power management item and set it to your liking.,Okay.,Having said all that, I hope it will help you.。

  2. Anonymous users2024-02-04

    First of all, the calculation of hard disk capacity is another calculation method when selling a computer, and it is usually smaller.

    Secondly, you may already have a backup system in your computer, so it takes up some space (about 10 gigabytes, and it's hidden).

    Regarding the black screen, you only need to adjust the time to turn off the monitor in the power settings, just 10 minutes (xp in the right-click Properties Screensaver Advanced; Vista: Right-click on Personality Power Options).

  3. Anonymous users2024-02-03

    1.Lenovo's machine has a system restore function,The premise is that a part of the drive is hidden,It should be behind the F drive。 How big it is, it depends on how many things you have in the C drive, and it is normal to find that there is a little less.

    320g hard disk, in fact, can't reach 320g, just about 310, plus the hidden drive, normal. There are no 290g hard drives on the market, so rest assured.

    2.The black screen is a screen saver, I think you should install Windows Vista, right-click on the desktop - personalize - screen saver, change the waiting time. If it doesn't work, that's the power setting, and there is a "Power Setting" in the bottom left corner to change the computer sleep time.

  4. Anonymous users2024-02-02

    Brother,It's the same as when you buy a USB flash drive.,It can't be just so much.,That part is occupied by the system and other things.,So you can't see it.,Also,Your machine is called standby.,It's not called a black screen.,It's good if you go to the attribute and change it.。

  5. Anonymous users2024-02-01

    5. Upstairs, that's a pretty good answer!

    It's worth referencing!

  6. Anonymous users2024-01-31

    There should be a hidden partition,The black screen may be a screen protector,Or it may be the power is turned off,In the right-click desktop (I hope the landlord knows what is called the desktop) attribute screen saver is selected to turn off the screen protection,Then click on the power inside and select it to never turn it off。

  7. Anonymous users2024-01-30

    Less is normal, this is due to differences between hardware manufacturers and algorithm standards, and there is also a portion of hard disk space that may be used to hide backups, so don't worry.

    The black screen is a screen saver, you right-click on the blank space of the desktop, click on Properties, select "Screen Saver" on the time and screen saver pattern selection, you will know it by trying.

  8. Anonymous users2024-01-29

    The first thing to explain is that standard 320G hard drives are generally not as large as 320G, and the actual storage space is slightly smaller than the label. Since you are Lenovo's computer, Lenovo will generally allocate a part of the space on the hard disk for system restoration, which is hidden in Windows, but can be seen during the installation process. This also consumes a portion of the hard disk space.

  9. Anonymous users2024-01-28

    The specific steps to partition the hard drive of a new laptop are as follows:

    Operating PC: HP 24-dp030

    Operating system: Windows 10

    1. Right-click the WIN logo on the desktop of your Windows computer, and click Disk Management in the pop-up window.

    2. After opening a new page, select the disk you want to partition and right-click, and click on the compression code from the toolbar.

    3. After opening a new page, modify the amount of compressed space, and then click Compress in the Rock Companion page.

    4. After completing the above steps, right-click on the unassigned page.

    5. Then click New Simple Volume in the pop-up window, and click Next.

    6. Set the size of the simple volume on this page, so click Next directly.

    7. After selecting the drive letter, select the drive letter and click Next.

    8. Enter the new page, you can enter the name of the new volume and click Next.

    9. After checking the information, click Finish, and the new computer will be successfully divided. <>

  10. Anonymous users2024-01-27

    Step 1Right-click on This PC, select Manage, and then select Disk Management in the left list of the Computer Management window. In Windows 10, you can also right-click on the start menu and directly select the "Disk Management" function.

    <> step banquet socks 2In the partition list, right-click on the part you want to repartition, select "Compress Volume", and the system will give you the available compressed capacity after analysis.

    <> step 3Enter the size of the capacity you want to split.

    Note that if it is a system disk, it should have at least 50GB of capacity. After determining the capacity, click "Compress", and when you are done, you will see that an unpartitioned free space has been added to the partition list.

    It should be noted here that because the Windows system is calculated according to 1024MB=1GB, and the hard disk manufacturers are converted according to 1000MB=1GB, if you directly input 10000MB, you will not get a 100GB partition.

    Step 4Create a simple volume.

    Repartitioning into one or more partitions is fine. Just right-click on the space, select "New Simple Volume", and then press the prompt "Next Move". <>

    Step 5Allocate capacity to other partitions.

    For unallocated space, you can also choose to assign it to any of the existing partitions, right-click on the selected partition, select "Extend Volume", and then follow the prompts.

  11. Anonymous users2024-01-26

    In fact, there is no need for the computer to be divided into multiple areas, and it is completely normal to use one of them. Moreover, the current system file management mode has a library mode, which can make the content in each folder well organized into the library (that is, managed by category), so it is not partitioned, and the classified management of data can be implemented. And now the system stability of the computer has been very strong, there are few crashes, etc., so there will be no loss of data due to reinstalling the system (of course, do not use ghost to reinstall or format the hard disk during installation).

    If you really want to partition because of the problem of using habits, then basically you can only divide it into two areas (one system partition and one data storage area).

  12. Anonymous users2024-01-25

    Hello, using any XP disc can be used to partition and format the hard disk during the process of reinstalling the system.

    No special system installation CD is required.

    If you have a random reinstall system disc when buying a machine, it's best to buy an original XP (the original version is a non-integrated version of the XP system disk), especially a notebook, it is recommended not to buy an integrated version of the XP, such as Tomato Garden, Ghost XP and other system disks. When you buy it, ask the store owner to ask for the original XP, and some system discs integrate several versions of the Xunsen system, including the manual installation of the pure version of the XP.

    The partitioning process can be carried out after pressing F8 to agree to the terms. First press the D key, press the Enter key, and then press the L key to delete the C drive, then press the C key to delete the data in the box, fill in the capacity you want to divide the C drive to create the C partition, and then create other partitions. After completing the partition, select the C drive as the installation directory, and then you can go to the format selection interface, and select FAT or NTFS to format (do not choose the fast way after repartitioning).

    After the format is completed, the beam cavity will automatically enter the installation until it is completed. Then right-click on the other disk and select "Format".

Related questions
8 answers2024-02-08

At present, ASUS** cooperates with Youde.com to launch the "old for new service" (brand is not limited), **old machine can be exchanged for ASUS** vouchers and cash, and the vouchers are used for ASUS** to purchase goods. >>>More

15 answers2024-02-08

The landlord said very abstract Oh,You say the notebook is good or bad,10000 yuan is definitely better than 5000 yuan,In fact, it's really good or not, first of all, it depends on whether the book meets your requirements,Then look at how cost-effective it is,If both are suitable, you can pay to take it home。 I don't know what performance machine you want,But here is a model recommended to you,Netbook V200,It's cost-effective is not said,You can refer to it,V200The specific performance is as follows: >>>More

10 answers2024-02-08

Have you tried changing the network cable?

Have you tried changing your computer? >>>More

4 answers2024-02-08

This question is not really a problem.

Because the ** in various places is not so much the same. >>>More

16 answers2024-02-08

There are more than 2,000 reasons for the blue screen, and the best way to solve the problem is to encounter this situation >>>More