How can you plug in the network cable if the Xiaomi Mi Box Enhanced Edition doesn t have a network c

Xiaomi Mi box3There is no network port,But there is a wireless network card,It can be used normally after setting up a wireless network。

How to set up a wireless network:

1) Press the "Menu" button of the remote control of the set-top box and find the "Settings" option;

2) Find [WLAN] in the settings menu and tap to enter.

3) Click the [Turn off] button in the upper right corner of the [Wi-Fi settings] page, and click to turn on [Wi-Fi].

4) Click to open, a lot of wireless network names will appear on the [WLAN Settings] setting page, find your wireless network and click to enter;

5) Enter the password of the wireless router, the general wireless password is 8 digits, if you don't know, according to the ** provided behind the wireless router, log in to set up, you can open the wireless network, so that the set-top box is connected to the wireless network.

<> Xiaomi box has a network cable slot,The one in the middle is the network cable socket。 You check that there are no lids around the box that can be opened, and this type of lid is usually used for protection. If you really don't send a picture, I'll take a look, I hope to help you solve this problem.

This is a wireless receiving system, and it would be nice to have a router at home

The Xiaomi box is wireless, right?

The Mi Box is plugged in with a network cable, and you can connect to the network in the box settings-network settings-wired settings.

Isn't there a network cable interface? You just plug in the internet cable. You should go to the forum to see that there are a lot of cracked TV software,This is the difference between Android TV boxes and general boxes。

1. Use wired connection and plug in the network cable, then the network will be successfully connected without other operations.

2. Wireless connection.

1.The first thing to do is to determine where your Xiaomi box is'Wi-Fi in the area;

2.Power on the Mi Box and select the Mi Box settings in the main interface;

3.Select Unconnected in the top left corner;

4.Wireless & Networking Wi-Fi;

5.Select the name of the wireless network you want to substantive;

6.Enter the network password;

7.The Wi-Fi connection is successful, and the Xiaomi Mi Box can access the Internet.

Yes. The Mi Box has a traditional network Ethernet RJ45 interface and a WiFi module plugged into the network cable, so the Mi Box can also use Xiaomi's duplicate wireless network card for networking.

The Mi Box can be connected to the network in two ways: the wired mode can be directly plugged into the network cable, and the wireless mode can be set up according to Xiaomi's prompts to enter the Mi Box system settings interface.

It is also possible to use a wireless network card without plugging in the network cable,As long as you use the wireless network card that comes with the Xiaomi box to connect to the wifi signal, you can use it。 Mi Box has a traditional network Ethernet RJ45 interface and WiFi module for plugging in network cables, so Mi Box can also use Xiaomi's wireless network card for networking.

The Xiaomi box does not have to be plugged in with the network cable,You can use the wireless network card that comes with the Xiaomi box to connect the wifi signal。 According to the information released by Xiaomi,Xiaomi box has a traditional network Ethernet RJ45 interface (that is, used to plug in the network cable) and a wifi module,The supported protocols are。

The intelligent voice system carried by the Xiaomi box is simple and easy to use, and it can be easily used by both the elderly and children at home. The voice remote control of the Xiaomi box is very convenient, and the software content is also very rich, and the speed is faster when using it, and there is less lag.

Mi Box is built-in wireless The specific configuration and use method is best to call customer service 400-100-5678 to ask.

How to connect the Mi box to the wired network: 1) Press the "Menu" button of the remote control of the set-top box and find the "Settings" option; 2) Find [WLAN] in the settings menu and tap to enter. 3) Click the [Turn off] button in the upper right corner of the [Wi-Fi settings] page, and click to turn on [Wi-Fi]. 4) Click to open, a lot of wireless network names will appear on the [WLAN Settings] setting page, find your wireless network and click to enter; 5) Enter the password of the wireless router, the general wireless password is 8 digits, if you don't know, according to the ** provided behind the wireless router, log in to set up, you can open the wireless network, so that the set-top box is connected to the wireless network.

Xiaomi box can be connected to the network in two ways: wireless and wired,Wired mode can be directly inserted into the network cable,Wireless mode only needs to enter the Xiaomi box system settings interface,Search for wireless signal,Select Wi-fiHotspot,Set up according to the prompts to access the Internet。