The browser and my computer window are constantly switching between maximizing the restore and full

It is recommended to check and kill the Trojan horse and repair the system.

1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system).

2. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired ones.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

If it really doesn't work, it is recommended to choose repair installation, so that the system can be repaired, and the programs and files of the C drive can not be lost.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

1. If it is caused by an add-in, try IE without an add-on: Enter iexplore -extoff to open IE in the run.

If no add-ons are normal, then it may be caused by the add-in. Find "Manage Add-ons" in the IE settings. Use the exclusion method to identify the add-on that is problematic by disabling the add-on.

2. If there is no latest display driver available, you can turn off the GPU hardware acceleration technology as an alternative: close all IE windows, press Windows R, enter, and click OK. Under the Advanced tab, tick "Use software rendering without GPU rendering" and click OK to try.

3. If the system or DX version is caused by problems, you have to reinstall or try later. If it doesn't work yet. Try reinstalling the system.

Open IE, press F11 to exit full screen, and then tap X in the upper right corner to close the window.

Then turn on IE again and it is maximized.

If steps 1-2 fail, press the win key + r to open the run window, and press the enter key to open it.

On the right side, click "User Configuration - Management Module - Windows Component - Internet."

explorer“。

Find "Force Full Screen Mode" in the list on the right.

Double-click to open the forced full-screen mode, select Not configured, and click OK.

Then start the computer and repeat steps 1-2.

Open IE, press F11 to exit full screen, and then tap X in the upper right corner to close the window.

Then turn on IE again and it is maximized.

If steps 1-2 fail, press the win key + r to open the run window, and press the enter key to open it.

On the right side, click "User Configuration - Management Module - Windows Component - Internet."

explorer“。

Find "Force Full Screen Mode" in the list on the right.

Double-click to open the forced full-screen mode, select Not configured, and click OK.

Then start the computer and repeat steps 1-2.

360 secure browser.

Or 360 Extreme Browser?

Both. It's not the same at all.

360 secure browser.

It can only be used on the basis of Internet Explorer.

Better than IE browser.

360 Extreme Browser.

It is a dual-core browsing mode.

One is the IE kernel browsing mode (which comes with the kernel).

One is the Extreme Browsing Mode (Chrome).

Which 360 browser are you talking about?

If it's a 360 secure browser.

You can fix it with 360 Security Guard.

If it still doesn't work.

It is recommended that you take a look at the 360 Secure Browser.

Tool. Options.

Set it up yourself there.

If it's a 360 speedy browser.

Please open the browser directly.

Look for a wrench sign.

After clicking on. options.

Full screen: Press F11 on the keyboard, and reinstall the Internet Explorer if it doesn't work.

Generally, the full-screen key is F11, and if you can't go out, you will esc

Either the desktop is displayed with the win logo +d or win logo +m.

Right-click on the shortcut of any software, select Properties, and look at the image below

Theoretically, software that supports window maximization can automatically maximize at startup in this way. However, it does not work for programs that run in non-windowed mode, or that force them to display at a specific window size.

Hello! What kind of software does it refer to? It is recommended to use Kingsoft Guardian and other optimization software to check and clean up system garbage, registry redundancy, and bad plug-ins. If necessary, you can uninstall the software and reinstall it.

What's the best browser? Hehe.

Method 1:

Method 2: Use Notepad to save the above registry file as all files, and then rename it" "Open" "" Import.

windows registry editor version

hkey_current_user\software\microsoft\internet explorer\main]

window_min_width"=dword:00000400

window_min_height"=dword:00000300

window_placement"=hex:2c,00,00,00,00,00,00,00,01,00,00,00,ff,ff,ff,ff,ff,ff,\

ff,ff,ff,ff,ff,ff,ff,ff,ff,ff,00,00,00,00,00,00,00,00,00,04,00,00,00,03,00,\

Method 31: Close all existing browser windows.

2. Open Internet Explorer.

3. Double-click the title bar to maximize it, or use the maximize button to maximize it to full screen, or you can drag the sidebar to the desired size.

4. In this case, close the browser and reopen it to achieve the desired full-screen mode.

Make the IE window open is maximized Sometimes when we use the IE browser, we don't know why the window becomes smaller, every time we restart IE it is a small window, even if we use "maximize" or it doesn't help. In fact, this is a kind of "memory" result of IE, that is, the next reopened window is the last closed state by default. To make it bigger again, go to the registry and select

hkey_current_user\software\microsoft\internet explorer\main\"Delete on the right"windows_placement"Key. In addition, in"hkey_current_user\software\microsoft\internet explorer\desktop\old work-areas"Delete in the window on the right"oldworkarearects"key, close the registry, restart the computer, maximize IE twice in a row (i.e. "maximize" - "minimize" - "maximize"), restart IE again, and it's OK.

I don't know what browser you're using.,Generally, IE browser should be maximized the next time it is opened.,Just open only one window first.,And then close it directly after maximization.,The system will remember by default.,The next time you open the browser, the default is maximized.。

Press "F11" to switch between maximization and normal mode, I don't know if it's the maximization problem you said.

If that doesn't work, try the following:

For browser shortcuts, set Maximize in the shortcut properties. However, you can open a non-maximized one at will.

IE window, drag the border with the mouse to maximize it, try to cover the entire desktop, and then close the window. ie

The browser has an auto-memory window size effect to the last closing.

The IE window size shall prevail. In the future, as long as the window size is not adjusted, then the newly opened window will have this maximum display area, and the effect of maximization is similar.

Run regedit to open the registry;

Sequentially"hkey_current_user\software\microsoft\internet

explorer\main"Branch, which is deleted in the window on the right"window_placement"Sub-key Dan stuffy ruler;

Again"hkey_current_user\software\microsoft\internet

explorer\desktop\old

workareas"Branch, delete it in the window on the right"oldworkarearects"Key.

Close the registry and restart the computer;

Open the IE and maximize the IE window twice in a row (ie"Maximize"--Restore"Mould height--"Maximize"), the dot closes IE;

Restart IE again. Open IE browser, maximize, then minimize the leakage, and then maximize again, close IE browser.

Close all other browser windows first, open only one browser window, and then maximize.

Close the browser when you're done, reopen it again and see if it's maximized?

You turn it off when you're maximizing, and it's maximizing next time. If you use 360, you can use the settings on the right in the system repair interface to lock the browser to the maximum enablement.

Loved ones, it's time for your IEH to level up.