How to solve the error of opening the settings in win 10

After installing win10, the computer prompts an error and keeps restarting, this is because of the pirated system or the incompatibility of the computer itself, there are the following ways to solve the fault:

After seeing the boot screen, press and hold the power button to turn off the power, and repeat it about three times in a short period of time to enter Winre (Windows Recovery Environment), but some users may need to disconnect the power directly. In this way, the interface for advanced recovery should appear after booting up;

Click on the Troubleshooter option, then click on the Advanced Options, click on the Startup Settings, click on the Startup Settings, click on the Troubleshoot Options, and select the installation mode.

After entering the safe mode, if you have installed anything before the black screen, you can uninstall and delete the software in the safe mode, if you are unsure, you can perform a clean boot, the operation steps of the clean boot are as follows:

1) Press win+r to open the comm window, enter the msconfig command and press enter, and the system configuration dialog box will pop up.

2) Switch to the Comma General tab, click on the comma to select the startup place, and then click Clear the tick above the comma to load the startup field.

3) Switch to the Comic Services tab, click Comma to hide all Microsoft services, and then click Disable All.

4) Switch to the Comic Startup tab, click on Comic to open Task Manager, click on Startup Items, and then click Disable.

5) After clicking OK to save, reboot the system.

Right-click on an empty space on the desktop and select Display Settings.

A prompt appears that ms-settings:display cannot be associated.

When I click on Personalization, it says ms-settings:personalization-background error.

You can hold down the win container key, then press r, bring up the run window, and enter msconfig

In the system configuration dialog box that opens, click Boot Selection in General, and check Normal Boot, then OK.

Then restart your computer and the problem is solved. The main reason is that some services or associated apps are not enabled. 23:15 2016/6/5

win10 open settings show file system error,The specific steps are as follows:

First, the first step, first on the win10 operating system desktop, and then open the run dialog box by pressing the win r key on the keyboard, as shown in the figure below.

Second, the second step is to pop up the run dialog box, and then enter the services msc command and click the OK button to enter, as shown in the figure below.

3. Step 3: Next, enter the main interface of the service, and then find and double-click the WindowsLicenseManagerService option, as shown in the following figure.

Fourth, in the pop-up WindowsLicenseManagerService Properties dialog box, then change the startup type drop-down box to Startup Options, as shown in the following figure.

5. The fifth step is to go through the above settings, and then prompt the file system error 2147416359 error problem can be successfully solved, as shown in the figure below.

Step 1: Enter Safe Mode.

and remove the most recently installed driver.

Software. Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode as shown below.

From the Select options screen, tap or click Troubleshoot.

Tap or click Advanced options, and then select [Startup Settings], ., .,Select [Start], click the safe mode environment you want to enter, and in general, it is recommended to select (4) to enable safe mode.

Second, with the Auto-Repair feature, you can detect and resolve certain system issues that prevent Windows from booting.

To run automatic repair, follow these steps:

Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode as shown below.

From the Select options screen, tap or click Troubleshoot.

Tap or click Advanced options, and then tap or click Automatic repair.

Auto-Repair will launch and attempt to fix Windows to prevent loading.

If the above still doesn't work, try restoring the system, or reinstalling the system.

Take win10 system as an example:

1. Force shutdown when booting up the system, repeat it three times, you can enter safe mode, select troubleshooting, advanced options.

2. Then after entering the advanced options of the system, you can see the options such as "System Restore", "Automatic Repair" and "System Image Recovery".

3. Select "System Restore" and follow the prompts to restore the system to the state before installing the update.

4. Or select "System Image Recovery", insert the system installation disk, and downgrade the win10 system to the originally installed version.

Windows not loading correctly is a service startup issue, and the workaround is as follows. 1. First, open the run window and enter the command, and click the OK button. 2. Then double-click the Windows Update service to enter.

3. Then in the page that opens, click on the General option. 4. Then select the startup type and click to select Automatic. 5. Finally, click Apply, then click OK to save the settings, and this problem will be solved.

1. First and foremost, when the system pops up a prompt that fails to load correctly, directly click "View Advanced Repair Options" and then click the Boot Repair function in Troubleshooting - Advanced Options to fix the problem of not loading correctly;

What should I do if the desktop of win10 and win7 system cannot load the black screen normally?

The win10 system has skyrocketed the user base, but then more and more problems have appeared, such as a file system error when opening a file in the win10 system, what is going on? The following will share with you the method to solve the file system error when you encounter a file opening.

4. Complete the above settings and restart the computer.

Web link to see if it's this, or web link.

On the screen where the pop-up window appears, select View Advanced Repair Options.

2.Entering the advanced options, we click on Launch Repair.

3.The repair is complete, press F8 to enter the boot selection interface, and we will first select the last correct configuration.

It is recommended to use win10 after the official version is released.

Nonsense obviously means restoration.

The computer won't turn on the solution:

1.Check whether the monitor and the main unit cable and connector are connected;

2.If the external monitor sees that the system has started normally, then you can check whether the switch button above the keyboard for turning off the power supply when the display is closed is normal;

3.If the external monitor and the pop-up display power-off switch are all right, the display cannot be displayed, then it may be a system problem;

4.If you are unconditionally connected to an external monitor, please reboot it and pay attention to whether the display screen is black at the beginning of the system boot in the DOS boot state. If the screen is also black when the DOS boots, and there is no normal self-test sound, it is mostly a system failure;

The startup disk may be set up incorrectly. Solution: Modify the hard disk mode. Boot up, press F2, F10, F12 Delete (depending on the motherboard) to enter the BIOS, and set the first boot disk as a CD, floppy disk or U disk to a hard disk (harddisk);

6.HDD MBR error can be reset with DiskGenius;

7.Check whether the optical drive, USB flash drive, floppy disk, etc. are inserted, if so, you can take them out and try to turn them on; Keep an eye on it.

8.Enter the BIOS, modify the hard disk mode, set different modes and try to restart to see if it can boot;

9.Press F8 to enter the mode, and select the latest correct configuration or normal startup.

10.If none of the above methods can be solved. Please disassemble the chassis, unplug the hard disk cable and reconnect it, and then see if it can be started; During the boot process, pay attention to whether the rotation of the hard disk is normal under the training leakage and touch it with your hands;

11.The one-size-fits-all approach: reinstall the system.