How to weave a turtle with wool, yarn turtle weaving video tutorial

Updated on vogue 2024-03-06
7 answers
  1. Anonymous users2024-02-06

    For you to find this, hope, thank you.

  2. Anonymous users2024-02-05

    1.The turtle shell is composed of 3 colors of threads, two colors hook the shell, 1 medium color hook belly, here it is represented by ABC. A-short needle V-short needle plus 1 needle A-short needle minus 1 needle.

    First of all, the turtle shell: the first circle: (A-color line) 6 stitches from the vertical shape of the ring.

    Lap 2: (B color line) 2*V - a total of 12 stitches.

    Lap 3: (B color line 6 (x,v)*6, 18 stitches in total.)

    Lap 4: [(B color line)x,(A color line)x,v]*6, 24 stitches in total.

    5th lap: [(B color line)x,(A color line)2x,v]*6, 30 stitches in total.

    Lap 6-8: [(B-color line)x,(A-color line)4x]*6, 30 stitches in total.

    2.Lap 9: (B-color line) 30x, 30 stitches in total.

    10th lap: Hook only the outer half of the wire, (B color line) 30x, a total of 30 stitches.

    Lap 11: (B color line) Bridge vertical 30x, a total of 30 stitches.

    3.Hook method of the abdomen (C color line):

    Lap 1: 6 stitches from the ring.

    Lap 2: V*6, 12 stitches in total.

    Lap 3: (x,v)*6, 18 pins in total.

    Lap 4: (2x,V)*6, 24 pins in total.

    Lap 5: (3x,v)*6, 30 needles in total.

    Lap 6: No addition or subtraction, a total of 30 stitches.

  3. Anonymous users2024-02-04

    The tutorial on how to weave a large tortoise is as follows:

    Handmade wool weaving turtle method**Handmade wool weaving turtle method**, the whole process is about five steps. Back. The back is composed of three pieces, which can be knitted first, and the two pieces on both sides are the same. It takes about three or two lines.

    1. The method of adding a needle, use the right hand to wrap the thread on the right needle, just like a single side; The advantage is that the eye of the needle is small, and the pearl cotton cloth is exposed.

    2. The method of reducing the needle: some use "pick and reduce": pick the needle on the right needle first, weave the following needle, and then pull the needle from the needle and reduce it to one needle, and some directly merge, that is, two needles and one needle.

    3. Use fine wool thread: 2 taels of light color line (orange, light green, custom), a total of seven taels (there will be some left, and the dividing line will be more left); Needle No. 12, when weaving, the hand should be tighter, so that you can look at it in preparation. If the hand is loose, you can use a 13 or 14 gauge needle.

    4. About 1 kg of pearl cotton and 3 taels; Eyes: Two, it is a black bead with a hole in the middle that I bought, sewn to the right place. The big ones are big, the small ones are small.

    5. Four feet: 3 stitches from the dark thread, 1 stitch for each of the two ends of each row, and one stitch on each line; Add to 29 stitches, knit 13 stitches, and triple pin in the middle (there should be 13 stitches on the left), with the good stitch as the center.

    6. Then take a needle from the left and right, three and one ......All the way to the remaining stitch. Pick up a total of 30 stitches around and weave 24 rows in circles. Tighten the edges, leaving about 6-7 inches of stitches.

    7. Weaving head: dark thread leaves about 6-7 inches of stitches, 30 needle circles imitate 14 rows of imitation mountain weaving, 4 rows of light-colored thread weaving, 4 rows of dark thread weaving, 4 rows of light-colored thread weaving, and then 6 rows of dark thread weaving.

    8. This row is separated by two needles and a knitting circle (45 needles), after weaving 24-28 rows, every 15 needles are three and one (that is, after weaving 12 needles, three and one), the line is combined (to the place where the upper line is combined), to one needle.

    9. Tail: The dark thread leaves about 6-7 inches of stitches, after knitting 22 lines from 24 needles, this row is two and one every 8 needles (that is, after weaving Dahong 6 needles, two and one), a row of flat needles, (interlaced and separated by a row to the place where the upper line is paralleled), until the last two needles and one needle.

  4. Anonymous users2024-02-03

    First, the weaving method:

    1. Surface: (sheet weaving) from 22 needles, add needles from the 3rd needle on both sides after weaving two rows, add 1 needle every other 1 row, add 11 needles on both sides to 44 needles, and then weave 14 rows, wear it to the ring needle for later use. A total of 6 pieces were weaved.

    2. Back: (sheet weaving) from 22 needles, the same weaving method as the surface to add to 44 needles, flat weaving 6 rows after the start of the needle, from both sides of the 3rd needle to start receiving, and then receive 22 needles, the end.

    3. Side: Knit 2 rows of black thread with 6 pieces (264 needles) to be used on the ring needle, and then weave 14 rows of flat needles with the same color thread on the back, 1 row of upper needles, 15 rows of flat needles, and do not close the head.

    4. Belly: (piece weaving) from the edge of the end of the head, find the 34 needles in the middle of the gumi and start weaving, pick while weaving, pick 2 needles and 1 needle at the needle. Add needles from the 3rd pin on both sides, from 34 to 68 pins.

    Then don't add or take in the middle. After adding 68 stitches, the 3 stitches on the side of every 7 rows are combined with the 1 stitch on the belly to form a small wrinkle, and the other rows are still 2 stitches and 1 stitch (1 stitch is on the side and the other stitch is on the belly). Knit about 80-90 rows of flat stitches, and then use the same method to collect 34 stitches.

    Keep your mouth shut. 5. Head: circle up 39 needles, weave 21 rows, weave 1 row and add 1 needle every 3 needles, and then weave 5 rows. Knit 1 row of 4 needles, 2 needles and 1 needle, then knit 2 rows of flat needles, 3 needles and 1 needle from anywhere, and knit 3 rows of flat needles until the remaining 10 needles, and 10 needles are drawn at once.

    This head is pointed, a bit like a turtle)

    6. Claw: 35 needles, 15 rows of flat needles. Leave 6 needles anywhere to start weaving, pick needles from both sides, pick 11 needles on each side, start from the middle needle with 5 needles and 3 needles and 1 needle, and pull at once when there are 5 needles left.

    7. Tail: 33 stitches. Circle knit 21 rows, 3 stitches and 1 stitch from any place, and draw at once when there are 3 stitches left.

    P.S. Another weaving of the head:

    Head: 23 needles, sheet weaving, back and forth weaving flat needles, subtract 1 needle on both sides of the next row, when there are 9 needles left, start to add needles, pick up along the original braids that reduce needles, the speed is the same, when 23 needles are fully knitted, pick up the 23 needles at the beginning together, a total of 46 needles are knitted in circles, and 5 circles of knitting begin to reduce needles. Start 2 needles and 1 needle on both sides of the 23 needles on one side of the needle, 1 needle on each side, and once every other circle, reduce to the remaining 32 needles, no longer add or subtract, and circle 20 rows to close the edge.

    2. Production: 1. Hook the woven surface and back together with a crochet needle on the front with a short needle. (The two pieces connected to the beginning and end of the turtle's back are the head and tail, respectively.)

    2. Fill the filling (space cotton) at the left opening, and put the filling evenly after the seam. (Each turtle uses about kilograms of stuff to fill the feet, tail, and head respectively, and then fill the rest into the belly).

    3. Sewing edge: sew through the black line on the front and the needle on the stomach, and the filling in the edge should be full and even.

    4. Put the feet, tail and head into the filler respectively and sew them in the corresponding positions.

    5. Hook the top of the head with light-colored fine velvet thread, tie a black buckle in the middle for the eyes, and hook a crescent moon for the mouth.

    6. Finally, hook the upper needle on the side of the line with a short needle.

  5. Anonymous users2024-02-02

    I can't find a tutorial.,I don't know if you can understand this1.Start with the tail. (dark line) ; 3@s 2r a, knit back and forth from 4 times, and then take the middle two needles as the center, add needles on both sides, (add 1 needle on each side of each row.)

    Add needles only when knitting. ), add a total of 24 stitches, add 10 stitches on each side, weave 7 rows of broken threads, and weave another piece. k,bx< e5 b、The two pieces are connected together, and two knits are added in the middle to go back and forth.

    xjyh [pgfx c, the first needle is picked down, next to two needles and one needle, the remaining 26 needles, and then flat knitting 41 rows. (26 stitches left in 1 row) *eyf"d. One middle two needles as the center, (add 1 needle on each side of each row.) Add needles only when knitting.

    Add 25 stitches on each side for a total of 76 stitches. ;6=*e'e needle plus one needle, a total of 14 needles, then flat weaving 11 rows. A total of 90 stitches.

    OP +Z> F needle plus one needle, a total of 17 needles, 61 rows of flat weaving. A total of 107 stitches. ?

    6gj%$c j, 1 needle per weaving, two needles and one needle, and then 3 rows of flat weaving. g]?QV2BX6 K, received an average of 26 stitches, and then flatknitted 21 rows.

    $hn> VO L, receive 12 stitches from both sides. f )7}pH m, two needles next to each other and one needle at a time, receive 6 needles to stop, and then connect the white wire. as|e=ut( >b$b|g~ 2.

    White thread woven belly (from the dark thread mouth) n1jm [g.From both sides, 12 stitches on each side, (1 stitch on each side of each row.) Collect the needle only when knitting.

    Received 36 pins, flat closing edge (second half) %0%TP ix&j8e22w 3The woven back and belly are stitched on the reverse side. The junction of the front and back parts of the belly is kept, and it is used for silk cotton, and it is sewn after it is installed.

    se[ yg8yat lls7k8;4w 4.Dorsal fin. ?

    CKV starts with 4 needles, one middle two needles as the center, and 1 needle on each side of each row. Add needles only when knitting. Add to 38 stitches, and then collect 1 stitch from each side of both sides, only the needle is closed under the knitting, and the remaining 6 stitches are sewn with the lock edge.

    Leave the last 6 stitches around the round mouth, and fill the silk cotton with it).After filling the silk cotton, sew it at the appropriate place on the back of the fish. 9u%(9ae ;kt5qiqyh 5.

    Pelvic fins. 14 pins from n t zm, the middle two pins are the center, and 1 pin is added on each side of each row. Add needles only when knitting.

    Add to 28 needles, and then collect 1 needle from each side of both sides, only in the weaving of the needle is to receive the needle, leaving 6 needles, and then from both sides of the one-time weaving each side of each pick and weave 11 needles, a total of 28 needles, first on both sides of each side of the collection of 1 needle, (only in the weaving of the needle), and then in the middle of the two needles as the center, each side of each row of each needle 1 needle, while both sides also each side of each row each 1 needle, (only in the weaving of the needle) received 14 needles flat closing edge. (Leave the last 14 stitches around the round mouth, with silk cotton).After filling the silk cotton, sew it in the appropriate place on both sides of the dolphin.

  6. Anonymous users2024-02-01

    1. Start from the abdomen. The first 32 needles of monolithic knitting flat needles begin to add needles in the third row, and then add a needle on both sides of each other line (each time the needle is added after the third needle on both sides) to add to 66 needles without adding or subtracting 60 rows, and then begin to reduce the needle and add the same interlaced subtraction, reduce to 32 needles when the whole circle is provoked, pick 100 needles on each side plus 32 needles at both ends for a total of 264 needles, weave 14 rows of flat needles for another color thread, weave a row of flat needles and a line of needles, and then change back to the original thread weaving 14 rows of flat needles. Change another color thread to weave a row of flat needles and divide it into 6 pieces of weaving, 44 needles on each piece (the color can be matched by yourself), knitting 10 rows, and the two sides of the needle reduction are also reduced at the third needle.

    Each piece is reduced to 22 stitches when the needle is closed.

    Second, 22 stitches from the lid interlaced with knitting flat needles, add to 44 stitches without adding or subtracting 6 rows of knitting and then start to reduce the needle to 22 stitches to close the needle. (The addition and subtraction of the needle start at the third needle).

    Three, the foot starts with 35 needle circles to weave 17 rows of jersey after the start of the weaving, from any place to leave 4 needles to start, each circle on both sides of the pick a needle down to weave, weave a bend, when there is one needle left to begin to close the needle, just like when we knit a heart-collar sweater, three needles and one needle, really to the end, then a curved pointed foot is completed, a total of four feet are knitted.

    Fourth, the tail: from 35 knitting flat needles. After 17 circles, start reducing the needle, there are no rules for this, you just need to lose a pointed tail as you like.

    Fifth, the head: from 25 needles back and forth to weave flat needles, each side of the next line minus 1 needle, when the remaining 10 needles, start to add needles, along the original minus needle braid, the same speed, 25 needles when the full weaving, the beginning of the 25 needles together to pick up, a total of 50 needles to weave in circles, with the same method of knitting socks when we were children, knit four or five circles after the start to reduce the needle, only on one side of the reduction, generally choose the side of the needle, let it as the bottom of the head, subtract 2 needles every other circle, respectively from both sides of the 25 needles, so as to keep the top of the head smooth and good-looking, When it is reduced to 32 stitches left, no more addition or subtraction, and another inch of knitting can be done.

    Sixth, the mouth can be sewn out, and I used a crochet needle to crochet an arc like a mouth.

    Finally, it's assembled. First, the top lid and six pieces are hooked together to leave a hole for the cotton. Then use 1 pound of bulking cotton, in addition to stuffing the head, tail and feet, all filled into the main body, just filled in like a football, you need to squeeze it, so that the bulking cotton in the inside is more even, more solid, and then use a needle from the upper and lower two pieces of the edge to sew with a reverse needle, of course, to use the same color of the thread, remember that when stitching, try to make the bulking cotton full of edges, so that it is more three-dimensional.

    Then sew the rest of the parts to the body as carefully as possible

  7. Anonymous users2024-01-31

    I think I think that the handmade wool weaving turtle method**handmade woolen weaving turtle method**, the whole process is about five steps. 1. Back. The back is composed of three pieces, which can be knitted first, and the two pieces on both sides are the same.

    It takes about three or two lines. Intermediate weaving method: 19 needles (11 needles from the small turtle) to start knitting flat needles, from both sides of the count of 4 needles (2 needles from the small turtle), add 1 needle in the next row, until the number of needles is 31 needles (19 needles from the small turtle) when the needle begins to subtract, the position is the same as when the needle is added.

    When it is reduced to 19 stitches (11 stitches from the little turtle), knit a reverse stitch with a thread of another color, and then start adding stitches, repeating 3 times as mentioned above, for a total of 4 small pieces. The weaving method of two pieces on both sides: 19 needles (11 needles from the small turtle), knitting flat needles, starting from the left 3 needles to add needles, adding 2 needles in the next row (note that only one side is added, to weave a triangle), until 19 needles (11 needles of the small turtle), when the whole is knitted, change the thread of another color (to be consistent with the middle piece) to weave a reverse needle, and then start to add needles, the same as the middle piece, repeat three times, at this time the number of needles should be 19 needles (11 needles of the small turtle), start to reduce the needle, and the beginning of symmetry, Subtract 2 stitches in the next row, and close the edge when there are 3 stitches left, that is, weave a piece, a total of two pieces.

    The final step is the three-piece suture. Starting from the middle piece, use the thread mentioned above when the reverse needle is played, pick the needle along one side, pick one needle in each braid, and then knit a reverse needle back to the beginning after all the picks are full, and sew the other piece from the reverse side, the sewing method is like when we knit the sleeves on a sweater. Then from the other side, the other piece is sutured in the same way.

    At this point, the most complex back is done, and the rest is simple. Second, the abdomen. It takes about one or two halves.

    You can change the color or not, depending on how you match it. 61 needles (33 needles of the little turtle), knitting flat needles, counting 14 needles (6 needles of the small turtle) from both sides, starting to add needles, adding 2 needles on both sides of the next line, until the 61 needles (33 needles of the small turtle), when the whole is knitted, do not add needles and do not reduce the needle and then weave 94 lines (56 lines of small turtles), in fact, it is woven to each side of each side of 47 (28 small turtles) braids, start to reduce the needle, and the beginning of symmetry, each side of the next row is reduced by 2 needles, reduced to the remaining 33 needles (21 needles of the small turtle) when the edge is closed, The abdomen is done.

Related questions
8 answers2024-03-06

No, the tortoise hibernates in the silt at the bottom of the pond or in loose soil covered with straw, does not eat or move, and hibernates, at this time its metabolism is very slow and weak. >>>More

4 answers2024-03-06

Mountain tortoise pruning method:

The growing season of the mountain turtle is spring, summer and autumn every year, and after winter, it stops growing and hibernates, and the vine leaves will wither. >>>More

15 answers2024-03-06

Tortoise shell [pinyin name] guī jiǎ [English name] carapax et plastrum testudinis [alias] turtle plate, turtle shell, turtle plate, lower carapace, blood plate, ironing plate [**] This product is the dorsal and ventral carapace of the tortoise chinemys reevesii (gray) of the turtle family. It can be caught throughout the year, with autumn and winter as the most, and after catching, it is killed, and the dorsal and abdominal armor are peeled off, and the residual flesh is removed, which is called "blood platelets". Or scald to death with boiling water, peel off the back armor and abdominal armor, remove the residual meat, and dry it, which is called "hot plate". >>>More

19 answers2024-03-06

I'll feed it shrimp, don't eat the ham in the mouth, you can feed some steamed buns or something, the turtle is omnivorous, don't change the water too often, just change it once every two or three days, in winter it will dig its own pit and sleep, don't care.

10 answers2024-03-06

The practice of stewed turtle in Bupleurum Atractylodes is described in detail. >>>More