How to prepare the insect trap liquid in the solar insect trap lamp

Insecticidal lamps are mainly used to kill pests and reduce the use of pesticides. It can trap and kill more than 1,300 kinds of pests such as rice borer, lepidoptera, coleoptera, diamondback moth, cabbage borer, beet armyworm, etc., and has the characteristics of strong trapping, little impact on beneficial insects, and convenient operation. Sichuan Shangtai Technology will introduce you to the precautions for installation and post-maintenance:

1. Installation of insecticidal lamps

Hanging light density——Insecticidal lamp: In the case of sufficient light source, the area of a single lamp to control pests is 15 25 square meters, and in places where there is relatively little light source, the area of a single lamp to control pests is about 30 40 square meters.

The height of the hanging lights is differentThe height of the hanging lamp directly affects the trapping effect of the insecticidal lamp on pests, such as the open field and the ground crop, the height of the hanging lamp is generally 80 100 cm; The height of the lamp is generally 100 120 cm.

Hanging lights and turning lights on and off time——Insecticidal lamps trap and kill insects have a strong regularity, under normal circumstances, the largest number of traps in May and October, there are also individual vegetable areas to April and November of each year is appropriate, at the end of April should be hung out of the insecticidal lamp, and it will be withdrawn in November.

The lights are generally turned on from 7 p.m. to 5 a.m. the next morning. Since 10 p.m. is the best time for insecticidal lamps to trap and kill insects, the best time to turn on insecticidal lamps should be between 7 p.m. and 12 p.m. during the peak pest emerging season.

Second, the daily maintenance of insecticidal lamps

1. Clean the insect bottle and clean the high-voltage power grid in time, the insecticidal lamp insect bottle must be cleaned once every 2 3 days, if it is in the summer high temperature insect pest season, it must be cleaned once a day.

2. Do a good job in the maintenance of lamps and lanterns, carefully inspect before hanging the lamp, and replace the parts in time if they are found to be damaged to ensure the booby trap effect.

1. Underground pests: beetles, ground tigers, etc.

2. Wheat pests: armyworms, wheat moths, etc.

3. Rice pests: rice borer, rice borer, rice borer, rice leaf roller, leafhopper, rice planthopper, etc.

4. Cotton pests: cotton bollworm, tobacco worm, red sandfly, blind bug, cotton bridge-building insect, yellow thrip, cotton field gray weevil, cotton aphid, etc.

5. Miscellaneous grain pests: corn borer, sorghum rod borer, soybean heartworm, soybean moth, millet heartworm, apple orange moth, etc.

6. Vegetable pests: diamondback moth, vegetable borer, beet armyworm, white planthopper, Spodoptera litura, yellow bend strip jumping beetle, potato tuber moth, plus borer, etc.

7. Storage pests: medicinal herb A, large grain thief, small grain thief, bean elephant, black mealworm, wheat moth, rice moth, ladybug, etc.

8. Fruit tree pests: heartworms, Spodoptera exigua, red bugs, peach borers, inchworms, etc.

9. Forest pests: pine caterpillar, American white moth, poplar white moth, willow poison moth, pine beetle, bare-shouldered star beetle, spring inchworm, large green leafhopper, leaf roller moth, birch inchworm, lamp moth, pine caterpillar, stalk beetle, etc.

10. Grassland pests: Asian trolley locust, grassland borer, leaf beetle, etc.

11. Tea pests: false eye green leafhopper, tea caterpillar, tea ruler moth, etc.

1. Due to the long details of the solar insecticidal lamp construction plan and the targeted construction plan, it is recommended to communicate with the manufacturer, and then give you a reasonable construction plan It will be better.

Second, to Huangchuan Limin Technology, according to the situation to customize the production of a batch of solar insecticidal lamps, this cost performance is much higher.

Third, first of all, we must understand the principle of this kind of lamp when it works. Most bugs have a light-oriented trait, and it's by using this property that we can use the light to attract bugs and kill them. Therefore, agricultural insecticidal lamps are aimed at insects with phototaxis, so they can effectively eliminate pests.

And basically all bugs can be attracted to it. Knowing how it works, let's talk about the choice of light for this lamp.

If we only grow a single crop, then we can choose a more targeted insecticidal lamp. Because different bugs have different sensitivities to light. For example, a wide spectrum of light can better attract adults of various insects such as cotton bollworm.

And if we have a variety of crops on our farm, we need to choose insecticidal lamps with a wider range of bands. This allows for widespread use and reduces costs.

So, do agricultural insecticidal lights really work? What kind of insects can he kill? We can rest assured about this matter.

Its effect is believable. According to the survey, after a period of time, there will be a significant decrease in the number of insects in the field, which is more prominent than the effect of applying pesticides. In addition, the crops obtained by this method do not have pesticides on them, so you can eat them with confidence.

It's a perfect thing.

Steps for the installation and use of solar insecticidal lights, layout and wiring:

1. The layout of the insecticidal lamp.

There are two methods of layout: one is a chess-like distribution, and the other is a closed-loop distribution. Generally, in the actual installation process, the chess-like distribution is more commonly applicable.

Because it hangs the lights along the pole running line in the field and then pulls the branch road to the field, it is more convenient to maintain and repair. There are also users who adopt other distribution methods according to the actual situation in the actual installation, which should be adapted to local conditions. No matter which method is adopted, the control area should be calculated with a single lamp radiation radius of 120m to achieve the purpose of energy saving and insect control.

2. Wiring. According to the type of lamp purchased, choose a 220V or 380V power supply, and then use the overhead line along the pole (the position of the pole should preferably match the layout position of the lamp). Where there is no pole, the above wooden stakes should be used as temporary poles, and the lines must not be pulled anywhere to prevent accidents.

Finally, the cost-effective solar insecticidal lamp is customized one-to-one according to the situation at Huangchuan Limin Science and Technology Street Lamp Factory.

The idiom "moths to the fire" vividly describes the phototaxis of insects. Light insect trap technology is to use the phototaxis of organisms to attract and eliminate pests, so as to control insect pests and insect-borne diseases. Light insect traps are specially used to attract and kill adult insects, reduce the number of pests, and greatly reduce the density and number of eggs laid by pests, so as to reduce and avoid direct harm to people and crops or spread diseases.

All kinds of pests and diseases have certain control standards, when the pest index is below the control standard, there is no need to use pesticides to prevent and control.

Different species of insects have different sensitivities to different wavelength spectra, such as green light has a strong attraction to golden striders, yellow light has a strong attraction to aphids, and human visible light with a wavelength of 400 680nm includes a variety of color light. The wavelength of 320 400nm long-wave ultraviolet light, which is invisible to humans, has a strong attraction to hundreds of pests. In the spectral range of long-wave ultraviolet and visible light, the wider the spectral range, the more species of insect traps.

We call the light source with a wavelength of 320 680nm covering the spectral range of long-wave ultraviolet and visible light as a broad-spectrum insect trap light source. There are many kinds of insects that are attracted and killed by the wide-spectrum insect trap light source, and the effect is good and the number is large. The broad-spectrum insect trap light source has special effects on various adults of the Lepidoptera, such as cabbage moth, cotton bollworm, ground tiger, heart-eating worm, pedicle borer, fruit-sucking leaf moth, American white moth and so on.

Other major pests with significant attractant effects include: Coleoptera's Scarab, longhorn beetle, beetle, jumping beetle, weevil, etc.; Diptera mosquitoes, flies, midges, flies, etc.; Homoptera's planthoppers, leafhoppers, etc.; Mole crickets of the Orthoptera order, etc. According to incomplete statistics in various environments, there are more than 1,500 species of insects trapped, and the broad-spectrum insect trap lamp is effective for most of the common pests.

The effective range of the light insect trap is a circle made by the radius of the distance from which the insect can see the insect trap light source, the general distance is about 80 100m, and the effective area is about 2 3hm (30 45 acres); The eyesight of various pests is different, in order to ensure the use of insecticidal lamps, the effective range of insecticidal lamps is generally determined to be acres). The effective range of light insect traps is also related to the type and power of the light source of the insect trap. The efficiency of energy-saving lamps is high, and the energy-saving wide-spectrum insect trap lamps with lower power can also exceed the effective range of high-power incandescent lamps, ordinary fluorescent lamps and ultraviolet lamps.

The effective range of the light insect trap is also related to the height of the insecticidal lamp, as the saying goes: "high light long-distance", within the distance range of the insecticidal lamp that the pest can see, the insecticidal lamp is installed in a higher position, and the effective range is also larger; But the installation position is too high and not easy to operate; Insecticidal lamps are mainly used for breeding, which can be matched with high lights and low lights, and the high lights expand the range of attraction, and the low lights are convenient for feeding animals.