What do I need to pay attention to when using a router?

1. Set up the router correctly, set up the router to access the Internet according to the manual, and only do a simple installation to be able to access the Internet. If there is no special need, other functions do not need to be changed.

2. In order to avoid the equipment connected to the router from abusing the bandwidth and causing other devices to access the Internet difficult, you can turn on the flow control function on the router and allocate the bandwidth reasonably.

3. Wireless routers have the functions of wired routers, but there are some unique factors to consider:

1) Pay attention to the wireless distance: try to put the router high and not in the corner to avoid obstructions.

2) Pay attention to the influence of interference factors: In order to avoid interference between other wireless devices and the router, keep the wireless router away from the **, microwave oven, wireless mouse and other electrical equipment that is in use. The wireless computer can see the information of the connected wireless signal in the preferred network, please delete the excess and keep it for yourself.

3) Pay attention to the compatibility settings: In order to avoid the problem of compatibility support such as wap, which may cause the wireless connection to drop, it is recommended to update the driver of the wireless network card to the latest version. Improper setup of some wireless features in the router can also cause disconnections.

4. Check the network situation of the router

1) Check whether the network cable is aged or damaged, whether the cat is faulty, etc. Avoid being unable to access the Internet due to other reasons.

2) Update the computer anti-virus program and system patch package in time to ensure the security of the LAN environment where the router is located as much as possible.

5. If the router is overloaded for a long time and will have an accident sooner or later, it is recommended to use a router with higher performance to ensure the stability of the network.

If the router runs for a long time, the performance of the device may be affected due to excessive temperature. If you can't access the Internet, the network speed is slow, or the web page can't be opened, try to restart the router. When you are not using the Internet for a long time, it is recommended to turn off the power of the device.

In addition, pay attention to the location of the router, and try not to place it in a place with high temperature, high humidity, excessive dust, or unstable voltage.

The above information is for reference only, the daily rental version of the star card will get 20 yuan phone bill, 200G star card exclusive directional traffic package, swiping**, playing the whole network, easier and more free, details can be viewed in the online business hall of Guangxi Telecom.

A router is a hardware device that connects two or more networks, plays the role of a gateway between networks, and is a dedicated intelligent network device that reads the address in each packet and then decides how to transmit it.

1. First of all, all routers will be optimized before leaving the factory, and you can access the Internet with simple installation, so if you don't have special needs, you don't need to make other changes. And in order to prevent others from abusing the bandwidth, you can also turn on the router's traffic control function.

2. Secondly, when installing the router, it should be noted that there should not be too many obstacles around the location, try to place it in a high and wide place, and it should not be too close to other wireless devices, such as microwave ovens and other equipment, otherwise it will cause interference to the router. At the same time, if you find that the network connection of the wireless computer finds excess signal information, you should also delete it.

3. Then, in order to avoid the compatibility problem of wap, for example, if there is no signal or drop in wireless, you can update the wireless network card, and if the wireless function of the router is not properly set, it will also affect the network operation. It is recommended to update and optimize in a timely manner.

4. Finally, when using the router, you should regularly check the condition of the network cable to see if there is aging and damage, otherwise it will lead to the inability to access the Internet. Moreover, the computer should also carry out anti-virus and patch packages in time to improve the security of the network.

The above is to share with you the precautions for the use of routers, I believe you have a certain understanding of this, I hope it can help you.

1. How to reset the router: first press the reset button, and after the indicator changes color, it means that the factory setting has been completed; Secondly, log in to the main interface, click to start the experience, select "Broadband Dialing", and enter the corresponding account and password; Change the name of the wireless network again and enter the wireless password. Finally, restart the router so that the reset of the router is complete and you can surf the Internet normally. Late.

2. What are the precautions for using the router?

1) When placing the router, do not directly place it next to high-power appliances, such as refrigerators, air conditioners, etc., because high-power appliances will interfere with the use of the router, which will not only affect its network speed, but also affect its heat dissipation effect, which is easy to cause internal parts to age, damage and other problems.

2) In order to save space, many people will stack routers in the corners of the wall, because most of the walls are solid walls, containing cement, steel bars, etc., which will slow down the transmission and transmission of the signal, so when we use the network in the next room, the network signal is poor. It is recommended that it be placed in the middle of the room so that the signal is sent evenly.

3) Turn off the power of the router when not in use. If the router runs for a long time without rest, then when the router is working, it is prone to problems such as stuck, poor signal, and no Internet access.

4) When the network is not in use, it is recommended to turn off its power regularly, which can not only reduce wifi radiation, but also prolong its service life.

1. The size of the bandwidth of the router: the bandwidth of the router is theoretically as large as possible, but when choosing, you should still choose the router based on your actual needs;

2. The type of wireless switch of the router: some wireless routers have a wireless switch, you can turn on or off the wireless wireless directly by pressing the switch, and choose the router according to the actual situation;

3. The wireless signal strength of the router: if the distance is far away or there are many obstacles, you should choose a router with more antennas;

4. Whether the router has WDS function: Some wireless routers do not support wireless bridging function, if there is such a need, you should pay attention to whether the selected router supports WDS function;

4. WDS function of router: Some wireless routers do not support wireless bridging function, if you need this, you should pay attention to whether the selected router has WDS function.

5. Whether the router has a signal enhancement function.

1. Whether in the low-end router or in the high-end router, the CPU is the heart of the router, usually in the low-end router, the CPU is responsible for exchanging routing information, routing table lookup and data packets, the ability of the CPU directly affects the throughput and routing computing capacity of the router, in the high-end router, usually the packet and the table are completed by the ASIC chip, and the CPU only implements the routing protocol, calculates the route and distributes the routing table.

Second, the router may consist of a variety of memory, such as flash, dram, etc., the memory is used as storage configuration, router operating system, routing protocol software, etc., in the low-end router, the routing table may be stored in memory. Generally speaking, the larger the router memory, the better, but the memory also does not directly reflect the performance and capabilities of the router, because efficient algorithms and excellent software may greatly save memory.

3. Netgear router has one of the most basic and important functions, that is, the data packet, and the packet is the biggest test of the router's packet ability at the same port rate. Full-duplex line speed** capability refers to bidirectional transmission on the router port with the minimum packet length and minimum packet interval without causing packet loss, which is an important indicator of router performance.

4. Regarding the routing information protocol, RIP is a routing protocol based on distance vectors, which usually uses hop count as a measurement standard, and RIP is an internal gateway protocol. Due to its simplicity of implementation, RIP is the most widely used routing protocol.

5. Interface throughput refers to the capacity of port packets, which is usually measured by packets per second, and it is the router on a certain port'Packet capability is usually tested with two interfaces of the same rate, but the test interface may be related to the location and relationship of the interface.

6. In addition to using the destination address as the basis for route selection, the router can also select the path for the packet according to the TOS field, source and destination port number. Policy-based routing can implement traffic engineering to a certain extent, so that flows of different quality of service or different data take different paths.

7. Distance vector multicast routing protocol, DVMRP is a multicast routing protocol based on distance vector, which is basically developed based on RIP, and DVMRP uses IGMP to exchange routes with neighbors.

The above is what we need to pay attention to when choosing a router, and I hope you can find a router that suits you after reading it.

When buying a router, try to choose first-line brand products, and buy them in regular channels, so that you won't buy shoddy products. Novices should also try not to buy second-hand routers, but to buy products in brand new original packaging, so that the quality is ***.

One is to choose a first-line brand, ***, good stability determines the experience of surfing the Internet, will not be inexplicably disconnected, dropped, the second is to buy double thousand routing, that is, the wired port is a gigabit port, and now the broadband is getting bigger and bigger.

1. Rate. The first thing you need to pay attention to when buying a router is the speed of the router, and the speed of the router on the market is generally about 150 megabytes. Generally speaking, speed is not a bottleneck that limits bandwidth, because the level of network bandwidth tremor in our country has not yet reached such a high level.

The general 150 megabit rate router is enough to meet the demand.

2. Optical fiber. Nowadays, routers on the market generally do not support optical fiber interfaces, so you need to buy a router that supports optical fiber interfaces, and first ask the store whether the router supports optical fiber.

3. Antenna or signal. This is a router, and the signal is a common issue that needs to be paid attention to, that is, the signal coverage, and the other is the problem of signal quality.

4. Radiation. Very.

The things that we usually need to pay attention to when choosing a router are:

1.**The more expensive the cost performance and quality are better than the average, when it is not all**The more expensive it is a little easier to use.

This varies from person to person.

2.Whether the frequency band or 5G is used depends on the family's house.

This year, router technology has developed very fast, most of the products used to be products in the frequency band, a small number of products in the 5GHz frequency band, and now products that support dual-band differential calendar have sprung up. The transmission rate has also increased from only 300m to 300m-2200m now! It is recommended that when purchasing, it is best to choose a router that supports both mainstream wireless standards and 11N, that is, and 5GHz.

The 5GHz rate is high, and the interference is small, but the relative wavelength is short, and the wall penetration force is poor. Although the rate is not high, its wavelength is longer and has a good ability to penetrate walls. These two frequency bands are used at the same time, and with a good antenna layout, Maqingchai can provide better WiFi coverage.

3.View product outsourced late molding, appearance, and accessories.

For example, whether there is 3C certification.

Logo, whether the appearance is damaged, whether there is an instruction manual, warranty card, network cable and installation CD, etc.

1. The size of the bandwidth of the router: the bandwidth of the router is theoretically as large as possible, but when choosing, you should still choose the router based on your actual needs;

2. The type of wireless switch of the router: some wireless routers have a wireless switch, and you can turn on or off the wireless wireless directly with this switch, and choose the router according to the actual situation;

3. The wireless signal strength of the router: if the distance is far away or there are many obstacles, you should choose a router with more antennas;

4. Whether the router has WDS function: Some wireless routers do not support wireless bridging function, if there is such a need, you should pay attention to whether the selected router supports WDS function;

4. The WDS function of the router: Some wireless Xiaola routers do not support the wireless bridging function, if there is such a need, you should pay attention to whether the selected router has the WDS function.

5. Whether the Qingqiao router has a signal enhancement function.

It is best to have dual bands separated, power size, support multiple devices, wifi6.