How to prepare glass water, the best recipe for homemade glass water

One: Summer. It rains a lot and the sand is heavy, and it is easy to stain the front windshield. At this time, the effect of glass water is mainly to clean the windshield.

First prepare a plastic bottle and rinse well. 2L of purified water, 250ml of medical 95% alcohol, 1-2 caps of detergent (detergent quality should be good), fully mixed and can be used. The main purpose of adding detergent is to remove sand, and the foam of detergent can quickly remove the soil but not too much, and it is difficult to rinse off too much foam.

Alcohol accelerates water evaporation and allows the glass to clean quickly. Add the above, may not be satisfied, you can directly add about 1 liter of pure water.

Similarly, liters of plastic bottles, 2 liters of purified water, 500ml of 95% medical alcohol, and 1 bottle cap of detergent are sufficient. Alcohol, an organic solvent, is still very good, and the effect of shellac is very good. If you are in an urban area, you can fill the dissatisfied kettle with pure water, but it is not recommended to reduce the concentration at high speed, which will affect the effect.

3. Winter. Considering that the northern city can reach -30 or even lower in winter, there are many car owners who directly add two pot heads, which can basically meet the needs, but the alcohol content directly affects the aging degree of plastic parts, so it is better to improve.

20% quality of 95 degree alcohol, 80% quality of water, the freezing point is basically around -10, no problem in early winter. 20-30% alcohol, 60% water, the freezing point is only -15, which is not very ideal, 40-50% alcohol, 50-60% water, the freezing point can reach -25 without freezing, basically to meet the needs of winter, because in winter it is basically not much water to clean the glass. Crucially, you must not fill up your glass kettle in winter.

The vents on the lid are easy to freeze, and the frozen and swollen liquid will directly burst the kettle. Therefore, one bottle of the solution prepared in a plastic bottle in winter is enough.

How to fill car glass water?

How to add glass of water **Collect well.

Glass water does not need to spend money to buy, teach you a preparation method of glass water, simple and convenient.

You don't need to buy a new one when you run out of car glass water, teach you to make your own glass water, save money and use it easily.

Homemade simple glass water: Use dish soap, detergent, laundry detergent and other alcohol-blended water instead of glass water.

In fact, glass water is made of deionized water plus various environmental protection additives and surface active detergents, which has the functions of decontamination, antifreeze, antistatic, and anti-corrosion. High-grade high-quality glass water, with rapid snow and ice melting, anti-glare, anti-fog and other properties, has a significant role in improving driving safety.

Most of the inferior glass water is mixed with water and alcohol, which not only damages the gloss of automobile paint and the hardness of rubber strips, but also causes color difference and swelling of rubber parts or other plastic parts. -Encyclopedia.

It's not expensive, so why bother!

Raw materials for glass water formula: 2L of purified water, 250ml of 95% medical alcohol, 5-10ml of detergent.

Pure water can ensure that there are no impurities, adding high-concentration alcohol can make the water evaporate quickly, the right amount of detergent can clean the glass, pay attention to the detergent can not be replaced by laundry detergent, not too much, only need to play the role of dust, otherwise too much will cause a lot of foam to be difficult to clean. Mix according to the proportion of the formula, if you can't fill the glass water tank, you can add purified water.

Precautions

Don't make too much glass of water at a time, the shelf life of homemade is very short, if it is a glass of water used in winter, the alcohol content should be increased to 30%, otherwise it is easy to freeze.

Viviral-water action

1. Lubrication performance

Car windows contain ethylene glycol, which has a high viscosity and can act as a lubricating agent, reducing friction between the wipers and the glass and preventing scratches.

2. Anti-fogging performance

A single molecular protective layer is formed on the surface of the glass. This protective film prevents the formation of fog droplets and ensures that the windshield is crystal clear and has a clear view.

3. Antistatic performance

After cleaning the car window, the substance adsorbed on the glass surface can eliminate the electric charge on the glass surface and has antistatic properties.

4. Cleaning performance

The car window net is made of a variety of surfactants and additives. Surfactants usually have the functions of wetting, penetrating, solubilizing, etc., so as to play the role of cleaning and decontamination.

Put half a bottle of liquor into a cola bottle, add half a spoonful of meal to wash (the concentration is similar to that used when brushing dishes), add purified water, not too full, shake evenly.

Spray this product on the removed parts, soak it for 2-3 minutes, wipe it with a soft cotton cloth or directly wipe the removed part with a soft cotton cloth dipped in the cleaning liquid, until it is translucent; If there is heavy dirt, it can be washed repeatedly, rinsed with water, and wiped dry; After dilution, this product can be directly injected into the vehicle glass cleaning water tank and sprayed with the vehicle; For example, anti-freezing and anti-fogging in winter can be used with "automotive glass anti-fogging agent", and the effect is very good.

The glass water you buy is always not durable, teach you to make your own glass water, it is easy to use and not expensive, try it.

The 20-year-old driver taught you to make your own glass water, and the effect is super good, and you will never buy glass water again.

The configuration method of automobile glass water is as follows:

1. Prepare a bottle of high-strength liquor, pour it into a large beverage bottle, and pour half of it;

2. An appropriate amount of household detergent can be added for daily use, and antifreeze should be added if it is used in winter;

3. Finally, add pure water and shake it carefully, remember not to add tap water, you can use mineral water or boil cold water;

4. In this way, the configuration of glass water is completed.

Automotive glass water uses

The function of car glass water is to clean the car windshield, as well as antistatic, lubrication, anti-fog, anti-freezing and other effects, there are some detergent ingredients and active agents in the car glass water, which can play the role of cleaning, in addition, most of the glass water will have alcohol or ethylene glycol and other substances, which can play an anti-freezing effect, in addition to the glass water can also be anti-fog, antistatic, lubrication and other effects.

Auto glass water is generally divided into 0 glass water used in summer and -20 and -35 glass water used in Qingxiao in winter. High-quality automotive glass water is a vehicle glass water made of deionized water and various environmental protection additives, which can effectively remove dust, lubricating oil, gasoline and diesel, residual polishing wax, gum, bird droppings, shellac on highways, etc. It can quickly disperse the rainwater on the windshield and avoid the windshield blurring in the driver's heavy rainfall weather.

It can neutralize the electric charge generated by the friction between the windshield and the wiper and the substances in the air, enhance the conductivity of the glass surface, resist static electricity, and prevent the charge from adsorbing dirt and affecting the field of vision. The pH value is always neutral, does not contain all kinds of metal ions, and does not have any corrosive effect on automobile topcoats, rubber, and various metals.

Here are two different preparation methods according to the climate of different seasons::

Spring: It's raining and windy, and it's easy to stain the front windshield. At this time, the function of glass water is mainly to clean the windshield.

First prepare a plastic bottle and rinse well. 2L of purified water, 250ml of 95% alcohol for medical shooting, 1-2 bottle caps of hand dish soap (good quality of dish soap), and it can be used after full mixing. Adding dish soap is mainly to remove sand, because the foam of dish soap can quickly remove dirt, but not too much, too much foam is difficult to clean.

Alcohol accelerates the evaporation of water, allowing the glass to clean quickly.

Summer & Fall:

It doesn't have to be dirty when it rains, but it's not easy to remove bugs when they hit the windshield with clean water. Shellac is difficult to handle, so add more solvents. Again, liters of plastic bottles, 2 liters of purified water, 500 ml of 95% medical alcohol, 1 bottle cap of dish soap is enough.

1. Prepare a bottle of high liquor first, and then pour it into a large drink bottle, only half of it is needed.

2. If it is used daily, then add some tan roll with household washing detergent, and if it is used in winter, you should add antifreeze.

3. Finally, add purified water and shake well.

4. That's it.

Precautions1. Remember that it is best not to add tap water to your fingers.

2. You can use mineral water or boiled cold water.

Hello how to prepare glass water! Happy New Year! The method of making glass water will teach you how to make it yourself.

The so-called glass water is the common name of automobile windshield washing fluid. It is a consumable item used in a car. High-quality car windshield water is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants.

Here's how to configure glass water. Prepare a liter bottle of Coke (be sure to wash it), 2 liters of purified water, 250ml of medical 95% alcohol (available in pharmacies), the ratio of water to alcohol is about 8:1.

Dish soap (dish soap or dish soap) 1-2 cola bottle caps (dish soap or dish soap should be in a liquid state, ***) can be used directly after being fully miscible. Analysis: The foam of dish soap quickly removes dirt; Alcohol accelerates the evaporation of water, allowing the glass to clean quickly.

If you are not satisfied with these possible bottles, you can directly add about 1 liter of purified water, and the cleaning quality will not be too much of a problem. Recipe dosage of glass water in winter: The recipe changes the ratio of water to alcohol to 8:

2. The freezing point of the prepared glass water is about -10, which can meet the needs of early winter. If the ratio of socks reaches 6:4, the freezing point can reach -25 without freezing, which basically meets the needs of winter.

Special reminder: Dish soap cannot be replaced by laundry detergent, which may cause precipitation; The alcohol content should not be too high, otherwise it will affect the aging of plastic parts. In the process of practical application, you can practice the formula on your own to achieve the best cleansing effect.