Laminate flooring is damaged, how to repair it

This floor is relatively close to the wall, so you can consider replacing it, 2If you don't replace it, generally those who sell floors have repair wax that can be repaired. Repair wax --- solid, relatively hard, heated with an electric soldering iron, the wax bakes and sticks to the floor, and there is generally a repair wax similar to the color of the floor.

If the consumer buys the floor of the regular manufacturer, there is damage and other phenomena can find the manufacturer's after-sales service personnel to repair, consumers do not have to worry about these trivial matters.

It is generally not possible to repair unless it is a very professional person.

Floors can be repaired.

The paint film on the surface of the floor is not broken, just a little scratch mark, which can be polished directly with polishing wax after the floor is cleaned. The polishing wax is mainly to protect the shine of the floor and make the surface of the floor smooth, so that you can avoid deeper damage to the scratched places.

The scratches on the floor are more serious, the floor paint film is damaged or exposed, you can use water sandpaper dipped in soapy water to polish and wipe clean, after drying, carry out local color supplement, and then brush a paint after the color is dry, dry for 24 hours, polish with water sandpaper, and then wipe the floor wax for polishing.

In addition, if the consumer's home is paved with laminate flooring, due to the high wear resistance of the surface of the laminate flooring, it is generally not easy to cause obvious scratches; Therefore, once the damage is bound to be more serious, but the effect of taking the method of partial destruction and reloading is not ideal, therefore, once the more serious damage occurs, only the overall reinstallation can be carried out.

Maintenance of the floor:

1. Anti-fouling: Every two or three months, you can apply floor wax on the floor. The waxed floor is not only clean and looks new, but also can protect the paint film and delay aging.

2. Varnishing: use.

After three or five years, you can use the same kind of paint as the first paint floor to repaint the floor.

3. Cleaning: The daily cleaning of composite wood flooring is very simple, just vacuum with a vacuum cleaner, wipe with a semi-wet cloth and mop, pay attention to the mop should not be too wet, and should be wrung out before use. The surface of the composite wood floor has a very thin layer of crystalline aluminum oxide wear resistance, and the destruction of the wear layer will cause damage to the floor.

Therefore, if the composite wood floor is accidentally polluted by nail polish, ink, wine, etc., it should be scrubbed immediately with nail polish remover and other cleaning agents, do not use sandpaper to polish during use, use chemicals such as cleaning agents with caution, and do not wax or paint to prevent damage to the surface wear-resistant layer.

If part of the composite wood floor is damaged and needs to be renewed, the damaged part should be removed and reinstalled according to the installation procedure.

There are three ways to repair laminate flooring:

1), kind of paint repair;

2), the kind is local damage, reinstallation and repair;

3) It is an overall reinstallation and repair.

There are pros and cons to each of these restoration methods, and they should be treated differently when chosen, except for resurving, which is more time-consuming and labor-intensive, and no one repair method can restore the floor or floor tiles to their original state.

Paint repair is generally the use of special repair paint or gel and other products, both to ensure the repair effect and to ensure the environmental performance after the repair, repair, can ask a special after-sales service personnel to carry out the door, the general paint products, even if the repair effect is achieved, can not ensure that the environmental protection standards.

The repair of local damage requires the destruction of the floor to be replaced, and then the complete removal.

1) Use a tool to chisel a gap on the short side of the floor to be replaced, and then use a saw to cut the surface of the floor to be replaced

2) Take out the floor that is divided into small pieces, but be sure not to damage the surrounding floor;

3) Clean the glue around the removed floor, and ensure that the cleaned tenon groove is easy to install, if the cleaning is not thorough, the joints will be uneven or not strict. You can use a small piece of floor with a new tenon to slide back and forth on the interface to find out the residual glue and remove it to ensure the beauty of the repaired floor, and it is also necessary to pay attention not to damage the surrounding tenon and groove;

4) Next, deal with the new floor, saw off the lower part of the new floor notch and clean the entire tenon groove, pay attention to reserve some space, because it will occupy a certain space after applying glue outside;

5), finally install the new floor to the position that needs to be replaced, the original floor tenon is coated with glue, and the new floor tenon is also glued, and then placed in the gap between the waste plate, first the corner of the long side tongue and the short side tongue is embedded in the notch edge of the original floor around, and then press the notch side by hand, and gently smash the wooden block with a special tool, pay attention to whether the length is consistent before installation, if the new board is long, you can shorten it a little, and the short one is only to disassemble and assemble the whole floor.

The overall resurfacing method is no different from the first paving, first the original floor is all cocked, and then the new floor is re-paved.

Ask me a question, see.

Answer 1: Disassemble and ventilate and dry. When the composite floor is bulging, the bulging wood block and the surrounding floor can be removed, so that through a period of ventilation and ventilation, the bulging phenomenon can be reduced, if the area is very large to pry up the floor, you need to wait for the ground and keel to be good before installing it back, when installing the floor, it is necessary to reserve a small gap to give the floor a space for wet expansion and contraction.

2. Sweep away the debris of the expansion joint. If the gap between the laminate floors is blocked, causing the floor to arch and deform, then the debris in the expansion joints can be restored by removing the debris.

3. Grinding and repair. If the bulge area of the laminate floor is small, the diameter is about less than 2 cm, it can be directly polished and repaired at the bulging position, but the color and texture should be the same as the surrounding area, and this method is very suitable for the parquet.

4. Replace the wooden floor. You can take down the wooden floor that has been arched and deformed, then use cement to smooth the floor, and finally replace it with a new floor.

Try it the way I did.

Question: What should I do if the water soaks in the afternoon and bulges? Can it be fixed? Or is it only necessary to change the floor, if the floor is changed, how to change it, is it easy to change?

Questions. How to solve it?

You flip it up, and I'll show you.

Please read the message I sent carefully

At present, the repair methods of the floor can be roughly divided into three types: paint repair, local damage, reinstallation repair, and overall reinstallation repair. There are pros and cons.

If the surface of the laminate floor is damaged, you can buy some paint of the same color and brush it on the surface of the wooden floor.

Find a flooring installer and readjust it once.

Furniture beauticians can beautify flooring.

Paint repair, partial damage reinstallation repair, overall reinstallation repair. For solid wood flooring, if the damaged area is small, it can be used to cover the damaged part through furniture, carpets and other decorations instead of repairing. If it is a slight scratch, you can ask the manufacturer's after-sales service personnel to come to the door for paint repair; If the damage is large and deep, it is necessary to carry out the repair method of local damage and repaving; No matter how serious it is, it will be repaved as a whole.

It can only be solved by grinding and lacquering, through the wood floor business to find renovation workers to deal with, with professional grinding machinery, from the rough and fine several processes of grinding, the old paint surface of the wood floor is completely ground off, and the wood floor is smoothed and smoothed, and then with the filtered fine sawdust to adjust the Bona putty to patch the joints, polishing, brushing the primer, then polishing, brushing 1 primer and 2 topcoats, done, the wooden floor looks good as when it is newly paved.

The floor paint must be made of professional wood floor paint, so that it is wear-resistant enough, and the life of the wooden floor is long.

If it is really serious or the repair effect is not satisfied, it can only be solved by grinding and painting, through the wood floor business to find a renovation worker to deal with, with professional grinding machinery, from the rough and fine several processes of grinding, the old paint surface of the wood floor is completely ground off, and the wood floor is smoothed and smoothed, and then use the filtered fine sawdust to adjust the Bona putty to repair the joints, polish, brush the primer, and then polish, brush 1 primer and 2 topcoats, get it, the wooden floor looks good as when it is newly paved.

The floor paint must be made of professional wood floor paint, so that it is wear-resistant enough, and the life of the wooden floor is long. In addition, if the area of wood floor paint is large, it is necessary to keep it ventilated and odorous after restoration.

Use a sander to wipe off the paint near the broken skin and then redo the paint, which is very troublesome and there is a color difference after making up. Or just replace the broken board.

The conformity plate at home is broken and can be removed for repair. The advantages of wooden flooring are many, but if not properly maintained, they can also cause headaches for homeowners. If the wooden floor is damaged, it will seriously affect its aesthetics and needs to be repaired immediately, if this is a partial damage, the floor to be replaced can be destroyed first and then completely removed.

The specific steps are as follows:

1. Cut a gap on the short side of the floor to be replaced, and then use a saw to cut the surface of the floor to be replaced;

2. Then remove the partitioned floor, but please make sure not to damage the surrounding floor;

3. Then clean to remove the glue from the floor, and make sure the clean mortise and grooves are easy to install. If the cleaning is not thorough, the joint will be uneven or loose.

4. You can use a small piece of floor with a new tenon to slide back and forth on the interface to find out the remaining glue traces and remove them to ensure that the repaired floor is beautiful, and care must also be taken not to damage the surrounding tenons;

5. Next, deal with the new floor, saw off the lower part of the side of the notch of the new floor and clean the entire tenon, pay attention to keep some space, because it will take up some space after gluing;

6. Finally, install the new floor to the place where it needs to be replaced, apply glue to the original floor tenon around it, then apply glue in the grooves of the new floor, and place it in the gap between the scrap boards and the corner of the long side tongue. Insert one corner of the short side into the edge of the slot in the original floor, then press the edge of the slot with your hand, using a wooden block to gently tap it with a special tool, noting that it needs to be kept the same length before and after installation. If the new board is longer, it can be shortened a little, and if it is short, it is only necessary to disassemble the entire floor.

Everyone's home has different flooring materials, and maintenance and repair methods are different. If the house is paved with solid wood or laminate flooring and the damage is relatively minor, you can choose to cover the damaged area with furniture, carpets, and other decorative items without repairs. If there are slight scratches, you can ask the manufacturer's after-sales service personnel to come to repair; If the damaged part is large and the level is deep, it is necessary to repair the local damage and re-pave; If it is severe, the whole resurfacing.

Generally, there will be a special repair paint for this kind, and you can ask professional maintenance and after-sales personnel to come to repair.

If it is broken and wants to repair it, then the best way is to remove the bad part of the floor, and then feel at ease, so that it is okay, but the color must be the same.

What if the laminate flooring in your home is broken? And if you just think about repairing her, you can find a professional technician to help you repair it, so if you want to change it, you can buy some stickers on a certain treasure.

Laminate flooring is relatively common in the daily life of the day, if the composite floor is damaged, it is easy to affect the aesthetics and use of the whole ground. Therefore, early detection and effective measures are very necessary.

1.Repair the damage as soon as it is found. If the laminate flooring is damaged, it is first necessary to locate the damage and then repair it. If not repaired in time, it may lead to the expansion of the damaged part or even cause a more serious safety hazard.

2.Replace the broken floor. If the damage to the floor is too severe to repair, the broken floor needs to be replaced.

In this case, the original flooring panels need to be removed and a new one installed. It should be noted that the color and pattern of the old and new floors should be consistent so as not to affect the aesthetics of the whole room.

3.Cover the floor. If it is only a partial breakage, consider covering the floor for treatment. It is possible to lay a piece of flooring of the same color and specification on the damaged part of the area, which can cover the damage without having to remove the entire floor and replace it.

4.Precautionary measures. Try to avoid using heavy furniture on the floor or walking around in hard-soled shoes to avoid wear and tear and damage to the floor surface. In addition, it is necessary to regularly wax and maintain the floor to enhance the strength and wear resistance of the floor.

In short, in the face of the breakage of laminate flooring, different treatment methods need to be taken according to the specific situation. If the floor is laid properly, pay attention to maintenance and maintenance, you can prolong the service life of the floor, save family expenses, and also improve the comfort and aesthetics of the family.

Summary. How to repair the damaged composite floor: the surface paint film is scratched, which can be repaired directly by polishing and waxing on the surface. For partial damage, you need to remove it first, clean the bottom glue, then you can install a new laminate flooring, and finally apply glue to the gaps.

There are a few pieces of laminate flooring that are rotten.

How to repair the broken composite floor: the surface paint is scratched by the stove film, which can be repaired directly by polishing and waxing on the surface. For partial damage, you need to remove it first, clean the bottom glue, and then you can install a new composite floor, and finally apply glue to the gaps.

The floor is rotten, not peeling.

If it's rotten, you can only buy a new one to fill it, and this can't be repaired.