How to copy the old peach hair USB flash drive How to use the old peach hair USB flash drive to star

Prepare a USB flash drive (the capacity depends on the system to be installed: 1G for Win XP, 4G for Win7, 8G for Win8 and Win10) on a normal computer that can access the Internet and has no viruses, follow the steps below to make a system installation USB flash drive:

4. Go to the computer where you need to install the system, and plug in the USB flash drive;

5. Power on, use the boot device selection menu to select Boot from U disk; Start installing the system.

Mass production using mass production tools is sufficient.

The specific steps of reinstalling Win7 are as follows:

1. First of all, after making the old peach USB flash drive, copy the ISO image of the system directly to the GHO directory of the USB flash drive, as shown in the figure below.

2. Next, insert the old peach USB flash drive into the computer, restart it and press the shortcut keys such as F12, F11, ESC, etc., and then select "Start from USB flash drive", as shown in the figure below.

3. Then, after booting from the USB flash drive, enter the main menu of the old road, and select [01] or [02] to enter and run the PE system, as shown in the figure below.

4. Next, in the PE system, if you don't need partitioning, skip to step 6, if you need full partitioning, then back up all the data of the hard disk, double-click the DG partition tool, click the hard disk quick partition, as shown in the figure below.

5. Then, Lu Ling sets the number of partitions and disk size. In general, it is recommended that the system disk is larger than 35 GB, if it is an SSD, check the center partition and perform 4K centering, and click OK to partition the partition, as shown in the following figure.

6. Next, double-click "Lao Tao PE One-click Installation" to open the installation tool, select the system ISO path as the mirror path, and click the drop-down box to select the GHO file, as shown in the figure below.

7. Then, click [Restore Partition] to select the system's security base installation location, generally C disk, or select according to the volume label and disk size, and click OK, as shown in the figure below.

8. Next, a dialog box pops up, tick "Reboot and Boot Repair after Completion", and click "Yes" as shown in the image below.

9. Then, in this interface, it takes about 5 minutes to perform the operation of extracting the system to C drive, as shown in the figure below. The world is respectful.

10. Next, after the operation is completed, the computer will automatically restart. At this time, pull out the old Tao USB flash drive and automatically execute the installation system and configuration process, as shown in the figure below.

11. Finally, the installation process needs to be restarted several times. The whole installation process lasts about 5-10 minutes until booting into the new system desktop, and the system installation is completed, as shown in the figure below.

The specific steps of reinstalling Win7 are as follows:

1. After making the old peach U disk, copy the system ISO image directly to the GHO directory of the U disk;

2. Insert the old peach U disk on the computer, restart and press F12, F11, ESC and other shortcut keys without stopping, and select Start from U disk.

3. After starting from the U disk, enter the main menu of the old peach, select or enter, and run the PE system;

4. In the PE system, if you don't need partitioning, skip to step 6 directly, if you need a full partition, you need to back up all the data on the hard disk, then double-click to open the [DG partition tool], click [Hard Disk] - [Quick Partition];

5. Set the number of partitions and disk size, it is generally recommended that the system disk is more than 35G, if it is a solid state drive, check the alignment partition to perform 4K alignment, and click OK to partition the operation;

6. Double-click [Lao Tao PE One-click Installation] to open the installation tool, select the system ISO path for the image path, and click the drop-down box to select the GHO file;

7. Then click [Restore Partition], select the system installation location, usually C drive, or select according to the volume label and disk size, and click OK;

8. A dialog box pops up, check Restart and boot repair after completion, and then click Yes;

9. In this interface, the operation of decompressing the system to the C disk is executed, which takes about 5 minutes;

10. After the operation is completed, the computer will automatically restart, and the old peach USB flash drive will be pulled out at this time, and the installation system and configuration process will be automatically executed;

11. The installation process needs to be restarted many times, and the whole installation process takes about 5-10 minutes until the boot enters the new system desktop and the system installation is completed.