-
Recently, if you install hardware and connect other devices, you may have poor hardware compatibility. If the software crashes when running a specific software, it may be that the software compatibility is not good, you can change the software version, reinstall the software, or run the software in compatibility mode. It may be a system abnormal, and you can restore or reinstall the system.
It may also be overheating and causing a crash, so you can clean the ash and replace the silicone grease to improve heat dissipation.
-
Laptop reboot and crash failures mainly include the following aspects: Hardware reasonsHardware is the foundation of the computer.
-
Press the power button directly to restart, and keep pressing F8 to enter safe mode when turning on the device.
-
Have you changed anything recently, such as drivers, or installed any software?
1. Restart the computer, press F8, and the selection menu will appear.
2. Select the last correct configuration, try the security mode, and if you can enter the security mode, you can uninstall the recently installed software or driver.
3. If you can enter safe mode, you can fix the blue screen through PC Manager.
1. Click to open the computer manager computer clinic.
Fourth, if this is still the case, you can only redo the system.
-
Solutions to laptop crashes and some of the causes: Shanghai Laptop Repair Center 400-669-9965
1. You can force the shutdown, press and hold the power on key and do not let go of the forced shutdown, and then turn on the power to view. It may be caused by a system file error or a software conflict, and the machine can be restarted.
2. If there are frequent crashes after restarting, it is recommended to save the data and reinstall the system.
3. Viruses. The most important thing to install antivirus software is to keep upgrading, and before surfing the Internet, it is best to upgrade the antivirus software to prevent all viruses.
4. Conflicts between software.
a. Try to avoid using test software, b. Pay attention to keeping only one anti-virus software, two or more anti-virus software installed in the same system may also cause crashes or system instability.
5. For hardware problems, it is recommended to go to the notebook manufacturer for after-sales testing.
-
It is recommended to press and hold the power button until the computer is powered off, and then reboot it after a few minutes to see if there is still a crash.
Do software troubleshooting first
1. The instability of the operating system itself.
Solution: Upgrade win10 to the latest version.
2. Viruses. Countermeasures: The most important thing to install antivirus software is to keep upgrading, and it is best to upgrade the antivirus software before surfing the Internet.
3. Conflicts between software.
Countermeasures: a. Try to avoid using test software, b. Pay attention to keep only one anti-virus software, two or more anti-virus software installed in the same system may also cause crashes or system instability.
4. If the above methods are invalid, it is recommended to back up important data and reinstall the system.
5. For hardware problems, it is recommended to go to the notebook manufacturer for after-sales testing.
This should be understood, I am an ASUS dealer, I place an order from the national agency, take the goods, the goods are mine, once sold, according to the three packs of execution, if you encounter a problem during the three packs, you give it to me, I will find a superior**, and then they are all responsible for repairing the internal things and then come back, if at this time, you will be refunded, and you will not be able to sell an old book, and the dealer can not afford this loss, so an obvious scratch on the shell is very troublesome Unless you bought it at the time, it is a display machine, and there are provisions for the three packs, you can check it out That's the proof of rights protection, and we sell machines to film in order to avoid this kind of dispute. >>>More
There are many reasons for the blue screen, both hardware and software can cause the blue screen.
ThreeMethod:1. BIOS settingsInappropriate(Restore the BIOS.)Factory settings >>>More
If you have additional hardware and other external devices, remove it, and press F2 when you boot it, if the BIOS interface can be displayed normally, you can try to repair the operating system. >>>More
One is that there are too many programs, which not only consume memory, but also consume power; >>>More