What should I do with an ASUS laptop with a white screen?

If you have additional hardware and other external devices, remove it, and press F2 when you boot it, if the BIOS interface can be displayed normally, you can try to repair the operating system.

1. Press and hold the shift key to force the power off and boot it 2 3 times, and it will automatically enter the winre interface when it is turned on.

Select Enter Safe Mode via Troubleshooter - Advanced Options - Boot Settings - Restart.

2. After entering "Safe Mode", uninstall the graphics card driver, and then restart it.

3. If you can enter the system, reinstall the original graphics card driver;

If it does not work, it is recommended to back up the hard disk data and reinstall the system.

If the BIOS interface cannot be displayed normally, it is recommended to send it to the service center.

If the screen is white, then restart it to see if there is anything, if it's okay, that's fine, if it doesn't work, then reinstall the system.

If the screen is white, first check whether the wiring of the notebook is abnormal, check whether the host board and CPU of the notebook are running normally?

If the laptop has a white screen, it is likely to be a problem with the contact of the display, if it has not been fallen, then it is best to choose to check the lower left corner or lower right corner of the cable place. If there is a fall, it is very likely that the screen is broken, and you can only go to a new screen farther away.

Well,What you said is a white screen,ASUS notebook,You shut down and restart,If you shut down and restart,It's still the case,Then you go to repair it.,Reinstall the system.,The system is caused by system damage.。

Ah,If your ASUS notebook is a white screen,That's shutdown and restart,If it's shut down,Reboot still doesn't work,Then you're the one to repair it.,Reinstall the system.。

The most common way to get a white screen is to restart the device, you can restart the computer to see the specific reason, generally the white screen is caused by the computer stuck or crashed.

If the laptop has a white screen, you must shut it down and restart it, if I still have a white screen after shutting down and restarting, then it must be that your notebook has failed, and you have to take it for repair immediately after the failure.

The screen is white, and the ASUS notebook should be restarted, which will be more reliable, and it will be more reassuring to use, and it has built a good performance.

It's a white screen, well, what should I do with an ASUS laptop? In fact, if the screen is white, it must be that uh motherboard inside there may be a problem, you should go to uh to check. Computer place to check and see what went wrong.

If the ASUS laptop has a white screen, you can send it directly to the warranty.

It's very likely that your system is crashing, and I suggest you just redo the system.

If the laptop screen is white, we had better restore the factory settings, and then complete the reinstallation and patching of the system, and solve the background data vulnerability.

You can think about it. Reboot. Do you see if it can be restored to its original state?

If your laptop is broken, you can ask an after-sales service person to help you fix it.

This notebook is still very good to use, although the white screen is white, but this notebook is still very good to use, although the white screen is white, but Qiqi.

The screen is white, what should the ASUS notebook do? This must mean that you have to get the staff to help you deal with it.

What should I do? You said the white screen, you can set it to turn it off and turn it back on.

What to do, mind in front of the after-sales service in the maintenance can know whether this is a big problem.

The launch band is out of power, and then what to do if I borrow the after-sales service, I will consult again to see what is going on.

It may be a problem with the connection of the monitor or screen, try to adjust the screen angle to see if the display is normal.

Then go to the BIOS to confirm whether there is a fault.

ASUS notebooks.

Enter the BIOS method: boot the laptop on power.

Once you see the ASUS screen, press F2 to type in the BIOS menu.

If there is a white screen before entering the system, it may be a software system problem.

Try updating the display adapter.

Drivers to the official latest.

If a recent system update or installation is the result, you can try uninstalling the latest installation.

There are three types of fault phenomena that manifest a laptop white screen: a white screen that keeps turning on the computer, a white screen when the computer is running, and a white screen that appears when the laptop is moved or when the screen is opened and closed. The following are the causes of failure and repair methods for these three situations::

First, the white screen has been turned on This situation is mostly caused by the damage of the screen line or LCD screen. Graphics cards and motherboards have a low probability of such failures. Replacing the screen cable or screen can solve the fault, and sometimes the screen cable and screen are not too damaged can also be repaired directly.

Second, the white screen in the operation of the notebook This kind of notebook white screen is not necessarily completely white, sometimes the screen starts from the periphery of the screen first, and slowly the full screen is destroyed and becomes pure white, and it will return to normal after shutting down for a while, and the time of failure is also random. This fault is mostly caused by graphics card problems, which can be fixed by packaging the BGA of the graphics card or replacing the graphics card. 3. Moving a notebook or opening and closing the white screen of the screen This kind of white screen is mostly due to the failure of the screen line, in the process of opening and closing the screen, the screen line is disconnected from the virtual connection, the power supply voltage of the screen does not come up, the image can not be displayed, only the white backlight.

The reason is that the screen line is worn and disassembled. Another situation is that the graphics card is soldered, and when it moves, the solder joint is just disconnected, and the image is displayed on a white screen. In this case, the graphics card can be fixed by doing BGA packaging.

Press the keyboard shortcut Ctrl+Alt+Del at the same time to launch the Task Manager, pop up the Task Manager, click on the File option, open the Run New Task, enter, and then decide to try.

Hello, it is recommended to find the official maintenance department as soon as possible and ask the master there to help solve it.

Repair method by yourself.

Turn on your computer and click Start;

After that, click on Settings;

Then click on Update & Security;

After that, click Restore;

Then click Start below Reset this PC;

After that, click Keep My Files.

Summary: 1. Click Start.

2. Click Settings.

3. Click Update & Security.

4. Click Restore.

5. Click Start under Reset this computer.

6. Click Keep My Files.

Display failure, or display chip failure, replacement of the display or display chip. These are more common.

There are many cases where a white screen appears, and you can deal with it in the following ways:

1.Press and hold the power button to force a shutdown and restart.

2.After the first one doesn't work, take the power off and unplug the power, remove the battery, press and hold the power button for more than 10 seconds, replace the battery and plug it back into the power supply, and try to turn it on.

3.If the above can not enter the system normally, please find after-sales, if you can enter the system but the file crashes, you can boot and press f8 to enter the system after selecting the last correct configuration to enter the system, if not, you can reinstall the system to solve!

If the computer is turned on and the white screen appears before entering the system, please go to the local service center as soon as possible to detect and deal with your computer hardware problems. If you see a white screen after entering the system, it is recommended that you enter safe mode to update your computer's graphics card drivers.

There are two possibilities: 1. The screen cable is not in good contact or is about to break [change the line].

2. The screen is broken [change the screen].

Differentiation method The screen line at a specific angle will definitely appear normal or abnormal, and the screen is broken and irregular.

It is recommended that you try to check the external monitor, if the external monitor is normal, it may be your screen or screen cable problem, if the external display is not normal, it may be your graphics card problem, it is recommended that you go to our service center as soon as possible to test, if you have been insured, you can also consider the third-party inspection and maintenance service.

Try to see if there is a problem with the connection between the monitor or the display and the graphics card, the connection is broken or short-circuited, causing the display signal to be abnormal, the display itself is faulty, and the main chip that controls the screen is damaged, which is more common, repair or replace the display.

This question is relatively rare! I'm telling you it's a software problem! The best thing to do is to reboot and try it once! If so, there must be something wrong with the hardware! I can only send it to the repair shop! You try it!

You can try a few more times, right, if it doesn't work once, if it's useless for the second time, then call the after-sales department to give you a test.