What should I do if I put a shelf on the wall but can t make holes in the wall?

You go to the bathroom shop and look at the shelves that can be sucked up to the wall.

What else can you do to fix the shelves and don't want to punch holes in the wall?

If installed on tile or glass, a nailless adhesive can be used.

But the nailless adhesive takes a few days to dry. Place the adhesive on the cross-section of the board, press it against the wall with tape and support it with a stool, otherwise it will slide down. It can be used after 3 days. Keep in mind that it cannot be used to paint walls, only hard iron or tiles or glass.

In the bathroom, you can choose some hollow shelves, which can effectively prevent water accumulation and better protect home hygiene. In the living room, you can install a hook-type non-punch rack, so that you can hang your bag or keys, which is very convenient! In order to make the most of your home space, you can also install a corner shelf in the corner to put some daily necessities or some chic knick-knacks, which can not only break the monotony of the home, but also perfectly expand the storage space of your home!

Stainless steel hangers are perfect for bathrooms. They are designed without punching holes. They are easy to install.

You can hang some bath towels and other items to keep the bathroom clean and tidy without worrying about rust! The nail-free hook with super load-bearing capacity is not only practical, but also has a particularly fresh and cute appearance. You can usually stick them in the bathroom, bedroom, living room, etc., to store some small items to keep your home environment clean at all times.

Multi-functional shelves: Equal width to the sink, it can meet all functional needs in a limited installation space, such as knife holders, chopstick holders, cup holders, towel racks, etc. It can be hung after cleaning. Chopsticks, cleaning tools, etc. For example, IKEA.

There are such metal shelves, which need to be punched and nailed to the wall to enhance the load-bearing of the shelves. Common ones are stainless steel and black, which can be matched with hanging baskets and accessories.

If it can show its high-end atmosphere again, it is undoubtedly the most perfect kitchen. But there are many kinds of tools, utensils, cutlery, and ingredients in the kitchen, which are very inconvenient to use and untidy to the touch, so there needs to be shelves in the kitchen. In fact, to make the kitchen look good, you have to customize the whole thing and hide everything.

But when it comes to practicality, open storage is more convenient.

That's all there is to know about what else you can do if you don't want to punch holes in the wall when you fix the shelves, I hope it will help you!

You can also buy some fixed hooks that can be glued to the wall, and then install a rack or buy some nails without nails, which can play a certain benefit, and can also avoid holes in the wall.

You can use a relatively strong double-sided tape to glue one side to the top of the shelf and the other to the wall, which will glue the fixed shelf to the wall and avoid punching holes in the wall.

You can choose hooks, and now there are many sticky hooks that are also very strong and relatively secure.

You can choose to fix it with nails, as long as the nails-free glue is used properly, the firmness is still very high, and the shelf fixed by the nails-free glue can bear a lot of weight.

Non-perforated blue butain can be used. Blue butament can not only be removed at any time, but also can be reused. It is not only environmentally friendly, but also does not cause any harm to the wall.

With double-sided tape, 3m is recommended, although it is a bit expensive, but it is really reliable.

You can put these things on the table, and you should buy something that doesn't need to be punched to use.

I think you can choose a glue hook because you don't need to punch holes, and it's very strong and has a good load-bearing.

You can choose a hook-type shelf so you don't have to punch holes in the wall and you can better place things.

If you don't want to punch holes, you can stick some sticky hooks on the wall and find a way to hang the shelves on top of it, so that you can achieve the same effect.

Multi-functional combination shelf: I use a 60 cm long, the same width as the sink, in a limited installation space, to meet a full range of functional needs, such as knife holders, chopstick holders, cup holders, towel racks, etc., after cleaning, hang it casually. Chopsticks, cleaning tools, etc.

For example, IKEA has such metal shelves, which need to be punched and nailed to the wall to enhance the load-bearing capacity of the shelves. The common ones are stainless steel and black, and you can match the hanging basket and accessories by yourself.

<> if it can show its high-end atmosphere, it is undoubtedly the most perfect kitchen. However, there are many kinds of tools, utensils, tableware and ingredients in the kitchen, which makes it inconvenient to use and untidy in appearance, so there is a demand for kitchen shelves. In fact, if you want to make the kitchen look good, you need to do the overall customization and hide everything.

But when it comes to practicality, open storage is more handy.

It can not only play the role of storage, but also achieve an aesthetic effect. So how do you choose the right shelf? The following is a comprehensive share of shelves for you, including kitchen shelves, bathroom shelves, living room shelves, etc., all of you at home are not quickly put away!

Although the kitchen area of the home is not large, the richness of the items in the kitchen, the variety of operations, and the complexity of scene changes are second to none in the entire home space. The design of this shelf adds the function of a drain rack to make the dishes in the kitchen better stored, after all, the wet ones are not very beautiful, and they are easy to breed bacteria or something, and a suitable drain rack can solve this problem well.

The biggest disadvantage of the metal shelves used in the kitchen is that it is too complex to clean up, **is my home, see the shelf on the right side of the gas stove, this is the simplest structure that I can find after searching and comparing on the **, the shelf with the most kitchen utensils. The upper wall shelves make full use of the blank space in the wall area and reduce the placement of items in the stove area. Nowadays, the upper wall shelves on the market have punch hole installation and non-hole installation, so it is not a big problem to install it yourself.

When you buy a shelf, you can choose a non-perforated or suction cup shelf, which looks simple and elegant and does not leave a mark on the wall.

You can choose a non-perforated adhesive sticker, so you can avoid punching holes in the wall, and it can also be used to store things.

You can also buy some hooks to stick on the wall or tiles, so that you don't need to nail hooks, and you can fix the shelves, which is very convenient.

You can put some hooks on the wall, so that you can tear the hooks off when not in use, and it will not cause any damage to the wall, and there is no need to punch holes in the wall.

In fact, we can choose the kind of hook with stickiness, which can also play a good role, and it is also easy to handle.

Can be glued together. The glue is very sticky and can also be used to fix shelves to the wall.

Introduction: With the continuous improvement of people's living standards, there are more and more daily necessities at home, many times we are very troubled about how to place these items, sometimes things are placed randomly, and it will be more troublesome to find when you use them. Therefore, most people will choose shelves, but most of the shelves seen are punched holes in the wall, which not only damages the wall, but also may cause injuries to the hands during the installation process.

A shelf is a kind of shelf that uses a combination of a base plate and a pillar to place sundries. Mostly supported by strip brackets, and then supported by the bottom plate, unique shape, smart design, easy loading and unloading, clean and bright, open design, so that the storage is visible at a glance, is a good helper for storing home and small items.

How to choose a stool shed purchase rack?

All the accessories in the bathroom, it can be said that there is the finishing touch, not only necessary, its shapes are varied, but it is the key to creating a bathroom space taste, but it is still an old saying, pay attention to the beauty before or to live according to the needs of life, so as not to look at the use and in vain.

1. Whether the base of the shelf is firm, and whether it is easy to shake when pushing and pulling.

2. Whether the material of the shelf can not rot, deform or rust in a humid environment. The shelves in the bathroom are in a humid environment for a long time, so it is necessary to choose materials that are not easy to be damaged by moisture and rust. Consider stainless steel and alloy shelves.

3. Whether the bearing capacity of the shelf is good, and whether the hanging weight will be deformed. The most fundamental thing about shelves is their weight capacity, and buyers need to choose according to the actual weight of their storage.

4. Pay attention to the matching, which should be matched with the style of the three-piece bathroom set (bathtub, toilet, basin) to ensure the unity of the entire bathroom style.

How do I maintain my shelves?

1) Develop the habit of opening doors and windows frequently, which can not only keep the air in the bathroom smooth, but also keep the bathroom dry, which will help the health of the family and absorb more fresh air.

2) The surface of the shelf should be wiped with soft cotton cloth and water to ensure a bright luster, and the acid and alkali solution with the corrosive nature of wild rough rock should never be used, and the dish soap should not be cleaned as much as possible.

3) If we want to decorate, we must not let the paint get on the shelf, because the paint has a great corrosive effect on the coating on the surface of the shelf.

Conclusion: The application of shelves in family life is becoming more and more extensive, and there are more and more types of household daily necessities, so a shelf is needed that can be rectified and placed in these daily necessities, and the design of the shelf is very simple and generous and dexterous at the same time, so it is very useful for placing living items, and the key is that it is conducive to living items to be able to take them well without looking for them very hard. That's the end of the introduction, I hope it can help everyone.

You can get it for free

1. Install the shelf, and use screws to connect the fixed mounting strip and the shelf firmly;

2. Clean up the water stains, oil stains and other dirt on the wall;

3. Evenly apply nail-free glue or paste adhesives such as double-sided tape on the fixed mounting strip of the shelf;

4. Press the shelves on the wall and bond them.

1.How much is the size of the shelf, and the weight of the big and put the thing, so it must be Bai to punch the rack.

Just come. 2.If there is no multi-DU, and the wall is hard, such as aluminum alloy DAO, wood, plastic, you can use AB glue to bond, a good AB glue bonding effect is very good, and the glued is better than the screw fixing.

First of all, there are two categories of hanging and non-hanging from the system, and they are divided into many different categories, ranging from a hook to a storage wall. It is said that details determine everything for a person, so let's first take a look at what kind of color these small hanging shelves have, in fact, you don't underestimate these shelves that rely on a wall to live, it is with their existence that your wall has developed another sky, and it is more vibrant.

In fact, there is an obvious dividing line between hanging shelves, that is, nail-free and non-nail-free. Non-nail-free is the need to punch holes in the wall, its use is almost permanent, the damage to the wall is also irreparable, the nail-free class is a new star in recent years, they are more environmentally friendly and comfortable, more considerate of your wall, do not need to punch holes, easy to take, more convenient to use without leaving traces, and weigh more than 10kg enough to store, now basically people are using nail-free shelves.

The large storage area design makes it easy to store all kinds of items. The double-layer structure effectively prevents items from falling. The addition of guardrails allows you to place toiletries without worrying about them falling. The hollow design at the bottom allows it to better drain and ventilate.

1.Prepare the percussion drill. As the saying goes, if you want to do a good job, you must first sharpen your tools, and the size of the impact drill bit needs to be determined according to the size of the expansion screw of the shelf, which is a necessary tool.

2.Once you have set the approximate position of the shelf, prepare a ruler to measure the height, hole spacing and hole position, mark it with a pencil and then punch the hole with a percussion drill. 3.

Insert the expansion screws and fix the expansion screws. 4.Fix the shelf with screws, and pay attention to the perpendicular eyelets when punching holes, and not tilt to affect the use.

Non-perforated shelves are a kind of small furniture that needs to be installed, and the correct installation of non-perforated shelves can make it more beautiful and firm, so how to install non-perforated shelves correctly? Today, PCHOUSE will answer them for you one by one.

1. Before installing the non-perforated shelf, first clean the wall, determine the position, and then evenly apply the fixing glue or paste the double-sided sticker, and press the shelf to the wall in a parallel direction. Because the fixation of this glue is still very sufficient, there is no need to worry about the problem of falling off. Don't rush to put things in a short period of time, and you can use them after about a day.

2. The non-punching shelf generally has a fixed mounting strip, remove the screws that were originally twisted on the non-punching shelf, and then put the holes. Place the fixing strip on the hole and seat the screw you just removed. For non-perforated shelves, double-sided stickers and fixing glue are applied.

Find the position and direction, remove the layer of paper on the double-sided tape against the wall, and press it parallel to the wall. Finally, attach the auxiliary sticker to prevent the storage rack from moving, and keep it for about a day or two before using it.

3. The surface of the non-perforated shelf should be wiped with a soft cotton cloth and water to ensure a bright luster, and corrosive acid and alkali solutions should never be used, and try not to clean with dish soap.