What to do if your laptop is dead?

If the computer is used for too long or is in standby mode for a long time, the computer may crash, in this case, you can try to restart the computer, first if the temperature of the computer is relatively high, you need to cool down and then restart. If it doesn't work, turn it off and start it again, or if it doesn't work, you'll have to try something else.

If your computer keeps crashing, it may be that the software is incompatible. If that's the case, right-click to select Properties, find Compatibility in the Properties window, select Run the program in compatibility mode, then select Run the program as administrator, and click Save. If the software incompatibility is solved, it should not always freeze.

It is also possible that there are too many boot processes that cause a crash, just turn off some unnecessary boot processes. Click Start in the lower left corner of the desktop, enter "msconfig" in the search bar, select the startup option in the pop-up system configuration, and then cross out the unwanted boot process, and then click OK to restart the computer, so that the unnecessary boot process can be turned off.

If you have too much software open, it can also cause your computer to freeze. This requires shutting down some processes, which are the software that the computer is running. Right-click to find Task Manager, select the Processes option to see the programs running on your computer, then select the processes you don't need, and click Close Processes.

You can also select the application and then select the runner you don't need and click End Task.

Recently, if you install hardware and connect other devices, you may have poor hardware compatibility. If the software crashes when running a specific software, it may be that the software compatibility is not good, you can change the software version, reinstall the software, or run the software in compatibility mode. It may be a system abnormal, and you can restore or reinstall the system.

It may also be overheating and causing a crash, so you can clean the ash and replace the silicone grease to improve heat dissipation.

Method 1 is to press the Ctrl key plus Alt and Delete key to call up the task manager, then click to select the program, and finally click to end the task.

The second method is to press and hold the power button switch to restart, press the power button to turn on, and the computer can run normally after booting.

In general, if there is any problem with the computer, you can choose to restart the computer to solve it, if it really can't be solved, then you can reinstall the system.

Causes of computer crashes.

2. Due to careless computer misoperation, resulting in computer system file corruption, etc., it is also very easy to cause computer crash.

3. The computer configuration is relatively low, but a large number of applications or large-scale running programs are running at the same time, resulting in poor operation of the system and crash, which is mainly manifested in the fact that a large number of programs run unresponsively, and the mouse and keyboard do not respond.

4. The use of some bad software or unstable software in the beta version leads to system bugs, resulting in poor compatibility and a crash of the specified Jane computer.

5. Caused by hardware problems, poor heat dissipation, excessive dust in the computer, overclocking of CPU settings, bad sectors in the hard disk, loose memory modules, etc.

6. The computer is not equipped with solid-state and there are too many background programs.

7. Some other reasons, such as power failure, poor hardware compatibility, etc.

Solution: 1. The temperature of the general computer hardware is better not to exceed 60 degrees after hardware testing, of course, if the indoor temperature is relatively high, slightly higher than 60 degrees can also be considered normal, but because the temperature of different brands of hardware may be different, if the hardware temperature is found to be relatively high, it is recommended to strengthen heat dissipation or try to clean up the chassis, or perhaps you can also rule out the computer often crashes.

If the computer hardware temperature is not high, the computer still often crashes, then the test is to check whether the computer hardware is in poor contact, focusing on checking whether the memory module is too dusty, and whether the memory and hardware are connected to the motherboard well.

2. Generally speaking, it is more likely that the computer has too much dust or poor contact, and the computer often has a blue screen of death. If the above common reasons for computer crash are eliminated, then you need to think about whether the computer system is faulty, and it is recommended that friends who are more familiar with the computer can try to restore the system or reinstall the system.

Restart Huai Oak, open the antivirus software after the startup is completed, and give the laptop a comprehensive antivirus, because there are some typical symptoms of virus attacks that the laptop always starts on its own or crashes suddenly, if the antivirus software detects the virus, it will prompt to delete or isolate the virus, and you can follow the prompts of the antivirus software.

If it is not a virus, or if the antivirus software can not detect it, then check whether it is a problem with the operating system, some operating systems are not very stable, if they are unstable, you can upgrade the operating system, maybe this problem will be solved.

3. Check whether the chip plugged in to the motherboard is not in good contact, if the computer is taken to clean the ash a few days ago, it may be because the chip on the motherboard is in poor contact and causes automatic start or shutdown.

4. Check whether the IDE interface between the hard disk and the motherboard is damaged, if there are signs of damage visually, of course you can't deal with it, you have to take it to a professional laptop repair shop to let a professional overhaul.

It is recommended to press and hold the power on button until the computer is powered off, and then restart it after a few minutes to see if there is still a crash.

Do software troubleshooting first

1. The instability of the operating system itself.

Solution: Upgrade win10 to the latest version.

2. Viruses. Countermeasures: Install anti-virus software, the most important thing is to keep upgrading, before you are taking lead to the Internet, it is best to upgrade the anti-virus software first, and eliminate the virus comprehensively.

3. Conflicts between software.

Countermeasures: a. Try to avoid using test software, b. Pay attention to keep only one anti-virus software, two or more anti-virus software installed in the same system may also cause crashes or system instability.

4. If the above methods are invalid, it is recommended to back up important data and reinstall the system.

5. For hardware problems, it is recommended to go to the notebook line for after-sales testing.

If it crashes, there is no better way, only press the power on and off button to turn it on, and you have to unplug the power supply if you can't turn it on (if you can't turn it on, one is to put it in and see, and you always can't turn it on and have to reinstall it).

When we use the computer, sometimes there will be a blue screen or computer crash and other problems, then sometimes we can shut down normally when the computer has problems, but sometimes we will encounter the situation that it cannot be shut down normally, then this time can only be solved by simple and crude forced shutdown. Today, the author will tell you about the tutorial of forced shutdown of the notebook, and friends in need will follow me down.

1. First of all, we can force the shutdown by pressing and holding the power button of the notebook for three seconds.

2. Some laptops will come with a restart button next to the power button, and the computer can also be forced to shut down by pressing the restart button.

3. Or when the computer is turned on, press and hold CTRL+ALT+del to achieve a forced shutdown.

4. If the above operation still can't solve the problem, you can remove the laptop battery and power off to achieve forced shutdown.

Okay,The above is about the notebook forced shutdown of the three residual grinding methods,Personally, I think that if it is not an extraordinary situation,It is not recommended to achieve computer shutdown by forced means,Such an operation will cause some damage to the computer to a certain extent,But if it is a very urgent situation,Then you can refer to。